medela 01044661 Silicone Breast Milk Collector Instruction Manual

: June 13, 2024
: medela

Table of Contents

medela 01044661 Silicone Breast Milk Collector
Product Usage Instructions
Intended Use
Important safety Information
How to Use
Cleaning Instructions at Home
Meaning of symbols
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

medela 01044661 Silicone Breast Milk Collector

medela-01044661-Silicone-Breast-Milk-Collector-product

Product Information

The Silicone Breast Milk Collector is a product designed to assist breastfeeding mothers. It can be used to collect leaking breast milk while the mother is breastfeeding or pumping on one side. The collector is made of silicone, which is a safe and durable material for contact with breast milk. It is important to read and follow all instructions before using the product.

Product Usage Instructions

Before using the Silicone Breast Milk Collector for the first time, it should be cleaned. Refer to the cleaning instructions provided.
Ensure that the collector is dry before use.
Place the collector on the breast that is not being nursed or pumped.
Make sure the collector is properly positioned and securely attached to the breast.
As breast milk leaks, it will be collected in the Silicone Breast Milk Collector.
After use, carefully remove the collector from the breast.
Empty the collected breast milk into a storage container if desired.
Clean the Silicone Breast Milk Collector according to the provided cleaning instructions for future use.

Cleaning Instructions

Prior to first use, clean the Silicone Breast Milk Collector using the following steps:

Wash with warm water and mild soap.
Rinse thoroughly to remove any soap residue.
Allow the collector to air dry.

Note: It is recommended to consult the full user manual for detailed cleaning instructions and any additional information related to the product.

Read all instructions before use

SAVE THE INSTRUCTION FOR USE

Intended Use

When the mother is breastfeeding or pumping on one side, the Medela Silicone Breast Milk Collector can help to collect the leaking breast milk on the other side.

Important safety Information

Important safety information/ Residual Risk/Warnings

Inspect before each use. Throw away at the first signs of damage or weakness.
This is a single-user product. Use by more than one user without adequate cleaning may present a health risk and should be avoided.
When using the silicone leak-proof stopper, make sure that it is inserted tightly in order to prevent milk leaking.
During use, make sure that the Silicone Breast Milk Collector does not press on the milk ducts of the nipple. By firstly ensuring the nipple is centred into the shield when applying to the breast.
The Silicone Breast Milk Collector may lose suction and separate from the breast on occasion due to capacity, skin humidity, etc.
Keep the product and accessories away from babies and children.
The product and its package are not toys, so do not allow babies and children to play with them.
The lanyard is solely designed and intended to be worn by adults. Do not place it around babies / children’s necks.
Never leave a baby or child unattended with the lanyard.
Do not let the baby chew on the product or its accessories.

How to Use

medela-01044661-Silicone-Breast-Milk-Collector-fig-1

Whenever using the Silicone BreastMilk Collector ensure the lanyard is attached and worn around the neck to prevent accidental spills during use.
Squeeze in the centre of the collection bottle. Firmly place the shield against your breast and areola, with your nipple centred to form an airtight seal. You can then start breastfeeding or pumping.
Once the Silicone Breast Milk Collector is full or when you have stopped pumping / feeding,hold on to the collector and gently squeeze the shield to remove it from your breast.
To ensure breast milk doesn’t spill insert the stopper before placing it down.
When you are finished, place the collector on the table and push down a little to create suction on the base, which will firmly stick it to the table surface, making sure it does not fall over.
When you want to move the collector,break the seal on the table surface by gently lifting up the tab on the suction base while holding onto the collector with the other hand.
When you need to store breast milk for a short time, place thecap on top, and store it at room temperature or in the refrigerator. When you need to store it for a longer period, pour your breast milk into a Medela storage bag or bottle. For information on storing your breast milk, visit www.medela.com.

Cleaning Instructions at Home

Clean prior to first use

Remove the lanyard from the collector before cleaning. Do not clean with harsh chemicals.
Thoroughly rinse and clean the collector.
Place all parts except lanyard into a pot, and fill with cold water (distilled water is recommended) until all parts are fully submerged.
Bring the water to boil and allow it to continue boiling for approximately three minutes.
Place parts on a clean surface and/ or towel and allow parts to air dry. Do not store wet or damp parts.

After each use

Always wash all parts as soon as possible after each use. Parts can be washed with a mild dish soap and then rinsed thoroughly in cold water. Do not use a baby bottle brush.
Check the Silicone Breast Milk Collector before each use. Do not use if there is any noticeable wear or damage.
The collector is made of silicone, which is a material that is easily oxidised, so the material may turn yellow after using for a long time. This will not impact the function of the parts.
Make sure the products is not placed near any sharp objects when storing.

Sanitization

Before use, clean the parts according to the cleaning instructions.
The Silicone Breast Milk Collector is dishwasher safe on the top rack only.
It is safe to sanitize in the Medela Quick Clean™ Microwave Bags.

Disposal

According to local regulations.

Storage

Store clean and fully dried parts in a clean place.

Material

Collector and stopper: Silicone; Cover: Polypropylene; Lanyard: ABS

Meaning of symbols

Indicates the manufacturer
Indicates the manufacturer’s product number
Indicates the manufacturer’s batch code or lot
Fragile
Keep away from sunlight
Keep dry
Consult the instructions for use
Indicates the number of products included in the package
Indicates the date of manufacture
Indicates that the package is capable of being recycled
Indicates the material from which an item is made
Indicates that the packaging contains products intended to come in contact with food according to regulation (EC) No 1935/2004
Indicates the date after which the product is not to be used

Contact

Medela (Changzhou) Medical Technology Co., Ltd.

Sino-Swiss International
Industrial Park (Changzhou)
Building A1 No. 2 Chuangye West Road, New District, Changzhou 213034, Jiangsu,China
Customer Service Phone: 400-670-3600
www.medela.cn

Distributed by