FLOS Luminator Floor Lamp Instruction Manual
- June 13, 2024
- FLOS
Table of Contents
Laminator
Design Achille & Pier Giacomo Castiglioni, 1954
INSTRUCTION FOR CORRECT INSTALLATION AND USE
WARNING!
The safety of this fitting can only be guaranteed if these instructions are
observed, during both installation and use. Please retain these instructions
safety.
REMARKS:
-
When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
-
The appliance may in no way be modified or tampered with, any modification may compromise safety causing the appliance to become dangerous.
FLOS declines all responsibility for products that are modified. -
The symbol marked on the appliance indicates the minimum distance at which the subject to be illuminated should be placed.
-
The symbol marked on the appliance indicates the need to use self-protected bulbs.
-
Should the external trailing cable get damaged, it must be replaced by FLOS or by qualified personnel in order to avoid any danger.
-
The symbol shown on the device indicates that the product must be thrown out in a different manner than with the urban trashes.
TECHNICAL DATA
EUR: Incandescent halogen bulb MAX 105W, E27 fitting, type HSGSR.
USA: LED bulb MAX 10W, E26 fitting, type SBLED.
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>