beper 40.967N Facial Steamer Machine Instruction Manual

: June 4, 2024
: beper

Table of Contents

beper 40.967N Facial Steamer Machine
Precautions
Description
Use instructions
Cleaning and care
Technical data
GUARANTEE CERTIFICATE
GUARANTEE CONDITIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beper 40.967N Facial Steamer Machine

Precautions

Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from dangerous sources. It is recommended not to throw these packing materials in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance’s power absorption.
Generally, the use of adaptors of multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptors are not exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

Use advice

Do not introduce any objects or materials into the sauna.
Do not cover the facial sauna with any type of material or object during use. Do not use the sauna with wet hands.
Do not use the facial sauna if you have sensitive skin or bad blood circulation.
Do not use the sauna directly on swollen, inflamed areas or skin rashes. If you suffer from any pathology related to your health, consult a doctor before using the facial sauna.
Do not use the sauna as a substitute for medical treatments.
Do not keep the facial sauna near the face in the same position for long periods of time, it could cause burns.
Do not use additives.
Do not use the sauna while bathing or having a shower.
Always remove the plug from the socket when filling the tank with water. Fill the tank with water only, be careful not to exceed the maximum allowed level. Do not immerse the product in water.
Place the sauna in places away from water and store in a dry place. Do not place the sauna on soft surfaces, it could tip over.
Do not cover or block the steam vents.
Do not use the sauna under a blanket or pillow; this could cause excessive overheating and cause a fire, electric shock and personal injury. Keep away from children.
Do not leave the facial sauna unattended when it is switched on and connected to the electrical socket.
After using the sauna, turn it off and remove the plug from the electrical outlet. For household only. Do not use the sauna outdoors.

Description

beper-40.967N-Facial-Steamer-Machine-fig-1

Facial mask
Water tank/steam bowl
Base
On / off and steam regulation button
Non-slip feet
Cord supply
Tray for essential oil
Lid of the tray for essential oil

Use instructions

Do not use the sauna as a substitute for medical treatment.
Fill the tank with water, using the appropriate measuring cup.
Be careful not to overfill the tank; the water must not escape.
Insert the face mask.
Insert the power cord plug into the socket.
Turn the knob clockwise until the red control lamp lights up. Turn the knob initially to position “2” to accelerate the heating. After some minutes the steam starts to rise, then return the knob to position “1” to reduce the steam flow.
Place your face as close as possible to the edge of the mask.
Keep the position for about 1 to 2 minutes, depending on your personal resistance to heat.
If you experience a feeling of discomfort or excessive heat, move your face to a greater distance from the mask.
Do not cover with blankets or anything else; even more when the face is on the facial mask.
It is possible to repeat the operation according to your needs.
It is also possible to use the product with essential oils by carefully following the instructions below:
Do not use essential oils as a substitute for water, but only in addition to a sufficient quantity of water.
The tray for essential oils allows you to use oils and other essences as part of an aromatic treatment. In this way, oils and other essences, mixed with steam, release better their effectiveness.
However, do not use saline solutions.
Can be used only oils and essences whose use is intended for steam masks and which have been approved for this purpose by the relative manufacturer.
Open the lid of the tray for essential oils, pressing lightly on the two tabs placed on the sides of the cover and pulling slightly upwards. Pour a few drops of oil on a cotton ball. Insert the cotton ball into the tray, then close the lid.

Warning: do not pour essences directly into the water tank, as the appliance may be damaged and the warranty will automatically expire.

Cleaning and care

Before cleaning the sauna, switch it off and remove the plug from the electrical socket.
Let the sauna cool down.
Remove excess water and dry thoroughly the facial mask that can be washed with water.
Clean the base with a slightly damp cloth and dry well with a dry cloth.
Do not immerse in water.
Do not use abrasive products or other detergents, they could damage the sauna.
Store the facial sauna in a dry place keep away from children.

Technical data

Power: 100W
Power supply: 220-240V ~ 50/60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase, a 24-month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on the condition that:

The appliance has been used properly and for the purpose for which it has been intended.
The appliance has not been tampered with, otherwise it is not maintainable.
The purchase receipt shall be presented.
The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier. For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.