Oceanic OCEAF2D206W1 Refrigerator Instruction Manual

Oceanic OCEAF2D206W1 Refrigerator

Product Information

The OCEAF2D206W1 / OCEAF2D206S1 is a refrigerator with the following contents:

• 1 Plastic bag with energy
• 1 Freezer ice scraper
• 1 Eggs tray
• 1 Ice cubes tray

This refrigerator has the following features:

• Freezer shelf
• Thermostat
• Refrigerator shelf
• Vegetable drawer
• Adjustable feet
• Top balcony
• Bottle balcony

The product weighs 36 KG and is available in two models: OCEAF2D206W1 and OCEAF2D206S1.

Product Usage Instructions

1. Description of the Appliance
   The appliance consists of various components including the freezer shelf, thermostat, refrigerator shelf, vegetable drawer, adjustable feet, top balcony, and bottle balcony.

2. Transport and Set Up
   Follow the provided instructions for transporting and setting up the refrigerator.

3. Cleaning the Appliance
   Refer to the user manual for instructions on how to clean the appliance properly.

4. Installation
   Follow the installation instructions provided in the user manual.

5. Usage
   Ensure that the appliance is placed in an appropriate location based on the climate class symbol indicated:

• SN: +10°C to +32°C
• N: +16°C to +32°C
• ST: +16°C to +38°C
• T : +16°C to +43°C

Follow the provided guidelines for using the refrigerator and freezer compartments.

Maintenance and Care
Regularly maintain and care for the appliance as instructed in the user manual.

Reversing the Door Opening
Refer to the user manual for instructions on how to reverse the door opening if desired.

Troubleshooting
If any issues or malfunctions occur, consult the user manual for troubleshooting solutions.

Disposal
Follow the proper procedures for disposing of the appliance when necessary.

Warranty
Refer to the warranty information provided for details on product warranty coverage.

Important Warnings and Safety Advice:

• Do not allow children to operate or play with the appliance.
• Avoid storing explosive substances or flammable materials in the appliance.
• Do not clean parts of the appliance with flammable fluids.
• Ensure the power cable is not damaged or pinched during positioning.
• Avoid placing multiple socket outlets or portable power supplies on the back of the appliance.
• Take caution when transporting and installing the appliance to avoid damaging the refrigeration circuit.
• Avoid using sharp or pointed tools for defrosting the appliance.
• Only an authorized technician should change the lamp in case of a breakdown.

IMPORTANT WARNINGS AND SAFETY ADVICE

• Read all instructions before using the device.

• Read this manual carefully before using the device so that you know exactly what to do and what not to do. Improper use of the device can be dangerous, especially for children.

• This device is intended for use in household applications.

• This device can be used by children aged at least 8 years and by people with reduced physical, sensory or mental capacities or lacking in experience or knowledge, if they are properly supervised. s or if instructions relating to the use of the appliance in complete safety have been given to them and if the risks involved have been apprehended. Children should not play with the device. Cleaning and user maintenance shall not be carried out by children without supervision. Children should be supervised to ensure that they do not play with the device.

• CAUTION: Keep ventilation openings in the appliance enclosure or in the framing unobstructed.

• CAUTION: Do not use mechanical devices or other means to speed up the defrosting process other than those recommended by the manufacturer. CAUTION: Do not damage the refrigeration circuit. CAUTION: Do not use electrical appliances inside the food storage compartment, unless they are of the type recommended by the manufacturer.

• If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or similarly qualified persons in order to avoid a hazard. Do not store explosive substances such as aerosols containing flammable propellants in this device.

• Before throwing away your appliance: remove the door and leave the shelves in place so that children cannot easily play inside.

  • Never allow children to operate or play with the appliance.
  • Never clean parts of the appliance with flammable fluids. The fumes are a fire hazard or can cause explosions.
  • Do not store or use gasoline or other flammable gases or liquids in or near this appliance. The fumes can cause a fire or an explosion.
  • Do not install this device in a place with extreme climatic conditions such as: insufficient ventilation, temperatures below 16°C or above 38°C

• This product complies with current European safety standards for electrical appliances. It has been subjected to lengthy trials and meticulous tests to assess its safety and reliability.

• Before connecting the appliance, check that the data given on the identification plate correspond to those of your installation.

• The packaging materials are recyclable, do not leave them in the environment, take them to a specialized center for recycling.

• The electrical safety of this device is ensured only when it is connected to an electrical installation equipped with an earth connection in good condition, according to the standard in force. If in doubt, have the installation carefully checked by a qualified technician. The use of this device, like that of any electrical device, implies the observation of certain fundamental rules:

  • Do not touch the device with wet or damp hands or feet;

  • Do not pull on the power cable to disconnect the plug from the socket;

  • Do not leave the appliance exposed to atmospheric agents;

  • Do not allow the appliance to be used by children without supervision;
    • Do not unplug or plug the plug into the socket with wet hands; before carrying out any cleaning or maintenance operation, disconnect the appliance from the power supply by unplugging the plug or switching off the main system switch; The power outlet must remain accessible after the installation of the device.

  • In the event of a breakdown or malfunction, turn off the device and do not damage it.

• The power socket must always remain accessible after the installation of the device.

• This refrigeration appliance is not intended for use as a built-in appliance.

• Recommended frozen food storage time in the freezer. These times vary depending on the type of food. The food you freeze can be stored for 1 to 12 months (minimum at -18°C).

• When freezing fresh food with an “use by / use by / use by” date, you must freeze it before that date has expired.

• Check that the food has not already been frozen. Indeed, frozen foods that have completely thawed should not be refrozen.

• Once thawed, food should be consumed quickly.

• To prevent food spoilage due to germ transfer: Store unwrapped animal and plant products separately in drawers. This also applies to different kinds of meat.

• If the food must be kept together for lack of space: wrap it.

• Never store fruit and vegetables on a balcony with meat or fish.

Refrigerant

Danger; fire hazard/ flammable materials

• WARNING: When positioning the unit, ensure that the power cord is not pinched or damaged.
• WARNING: Do not place multiple socket outlets or portable power supplies on the back of the device.
• The refrigerant gas contained in the circuit of this device is isobutane (R 600a), a low-polluting but flammable gas. When transporting and installing the appliance, take care not to damage any part of the refrigeration circuit. Do not use any sharp or pointed tools to defrost the appliance.
• Do not use any electrical device inside the device.
• Only an authorized technician can change the lamp in the event of a breakdown.
• WARNING: When positioning the unit, ensure that the power cord is not pinched or damaged.
• WARNING: Do not place multiple socket outlets or portable power supplies on the back of the device.
• Children between the ages of 3 and 8 are allowed to load and unload refrigeration appliances.
• To avoid food contamination, please observe the following instructions:
  • Prolonged opening of the door can lead to a significant increase in temperature in the appliance compartments.
  • Regularly clean surfaces that may come into contact with food and accessible drainage systems.
  • Store raw meat and fish in suitable containers in the refrigerator, so that they do not come into contact and do not drip onto other foods.
  • The two-star compartments for frozen products are suitable for storing frozen food, storing or making ice cream and for making ice cubes.
  • The one, two and three star compartments are not suitable for freezing fresh food.
  • If the refrigeration appliance remains empty for long periods of time, switch it off, defrost, clean, dry and leave the door open to prevent the development of mold in the appliance.
  • Place the device against a wall whose free distance does not exceed 75 mm and exceeds 50 mm.

Suitable for food

Information on the meaning of the conformity marking
The marking E indicates that the product meets the main requirements of the European Directives: 2014/35/EU (Low Voltage), 2014/30/EU (Electromagnetic Compatibility), 2011/65/EU (Restriction of use of certain substances in equipment electronic)

DEVICE DESCRIPTION

1. FREEZER SHELF
2. THERMOSTAT
3. REFRIGERATOR SHELF
4. VEGETABLE TRAY
5. ADJUSTABLE FEET
6. UPPER BALCONY
7. BOTTLE DRINKS BALCONY

• Recommended thermostat temperature setting: 4/( 3℃ ~ 8℃）
• Setting “0”; if the refrigerator makes noise, check the leveling and check that there are no objects in contact with the rear wall; if the refrigerator does not perform sufficiently, check that the interior is not full, that the door closes and that the condenser is not full of dust.
• If there should be water in the lower part of the refrigerator (vegetable drawer and extractable top) check that the hole allowing the defrost water to come out is not obstructed.
• Installation is the responsibility of the buyer Our company is not responsible for damage due to poor installation and declines all responsibility in the event that the ground connection does not comply with the National Standards in force.
• At the end of the functional life of the appliance using R 600a (isobutane) refrigerant gas and flammable gas inside the insulating foam, the appliance must be put in a safe state before it is scrapped. For information on this operation, contact your trusted retailer or the responsible local body.

WARNING:
Do not damage the refrigerant circuit.

TECHNICAL CHARACTERISTICS

TECHNICAL SHEET RELATING TO THE ENERGY LABELING REGULATION: 2019/2016/EU
The product information sheet according to EU Regulation No 2019/2016 Energy labeling of refrigerating appliances can be found under the URL or QR code indicated on the energy label.

• OCEAF2D206W1- URL: https://eprel.ec.europa.eu/qr/1397102
• OCEAF2D206S1 – URL: https://eprel.ec.europa.eu/qr/1397104

BEFORE FIRST USE

1. TRANSPORTATION AND GETTING STARTED
   When transporting, take the unit by the base and gently tilt it up to 45 °. Never lift the appliance by the door handle. Do not turn the unit upside down or horizontally. Push the refrigerator on the wheeled legs to move it. Warning: After transporting the refrigerator, you must wait at least 8 hours before putting it into service.
   IMPORTANT: The installation of this device requires the intervention of several people.

2. UNPACKING THE APPLIANCE AND DISPOSING OF THE EMBALLAGIC ELEMENTS

3. Remove all packing material around the appliance and the protective elements inside the appliance compartments.

4. Carton board and sheets of paper are recyclable. They must be thrown in the collection bins provided for this purpose.

5. Other packaging elements (adhesive, fasteners, etc.) must be disposed of with household waste.
   

6. To know more: www.quefairedemesdechets.fr

7. CLEANING THE DEVICE: Clean all items in the chest freezer with water and a mild detergent solution. Rinse it thoroughly and dry it with a soft cloth.
   Note: The electrical parts of the device can be cleaned only with a dry cloth.

INSTALLATION

1. Make sure the unit remains upright during transport. Do not tilt the unit more than 45 degrees when moving it. Do not exert pressure on the condenser, the door and its handle to avoid deformations or disturbances to the operation of the refrigerator.
2. Make sure there is enough space around the refrigerator for it to work well. Allow a dozen CMS of free space at the back and sides of the device so that the air can circulate to cool the compressor. Also leave about thirty centimeters above it.
3. Place the device away from direct sunlight and heat sources (stoves, heaters, radiators, etc.). Direct sunlight can damage the acrylic coating and heat sources can increase electricity consumption. Extremely cold ambient temperatures can also cause malfunctions. Avoid placing the device in damp places. If there is too much humidity in the air, frost will quickly form on the evaporator.

Cool zone

• This is where you should store foods that can be kept longer if you store them.
• keep cool. Milk, yoghurts, fruit juices, hard cheeses, for example cheddar. Bottles and other open jars of salad dressings, sauces and jams. Fats, eg butter, margarine, low fat spreads, fried foods and lard. Eggs.

Coldest zone: 1°C à 5°C
This is where to put foods that need to be cold to be stored safely. It is more generally any fresh product whose use-by date (DLC) is associated with a storage temperature less than or equal to +4°C.

• Raw, uncooked foods should always be wrapped.
• Chilled precooked foods, eg ready-to-eat foods, meat pies, soft cheeses.
• Pre-cooked meats, for example ham.
• Prepared salads (including mixed green salads, in pieces, pre-washed, pre-packaged, rice, potato salad, etc.).
• Desserts, eg cream cheese, home-cooked food and leftovers or cream cakes.

Salad bin
This is the most humid part of the Refrigerator. Vegetables, fruit, pieces of fresh salad, eg whole unwashed lettuces, whole tomatoes, radishes, etc.
WE RECOMMEND THAT ALL GOODS STORED IN THE SALAD BIN BE WRAPPED.

REMARK :
ALWAYS PACK AND STORE RAW MEAT, CHICKEN AND FISH ON THE LOWEST SHELF AT THE BOTTOM OF THE REFRIGERATOR. THIS WAY THEY WILL NOT DRIP ON OR TOUCH OTHER FOODS. DO NOT STORE FLAMMABLE GAS OR LIQUID

Freezer

• Freezer shelf
  • Store food in small portions.
• Drawer Freezer compartment
  • Seal foods in lidded containers, plastic wraps or plastic bags to prevent drying out and mixing of odors.

Note: Food packaging

• Pack foods in portions that fit your needs.
• Portions of fruit and vegetables should not exceed 1 kg, those of meat can reach 2.5 kg.
• Smaller portions freeze faster and better preserve the quality of food when defrosting and preparing meals.
• It is important to pack foods in airtight bags or containers before freezing them to prevent them from losing their taste or dehydrating.
• Wrap the food, expel the air and seal the bag or container tightly.

Suitable packaging:

• Plastic bags, stretch film, aluminum foil and freezer containers.
• You can get these packaging from your usual merchants.

Inappropriate packaging:
Wrapping paper, parchment or cellophane, garbage bags or sachets that have already been used.

Suitable sealing devices:

• Rubber bands, plastic staples, cords, freezer bag ties or similar device.
• Films and plastic bags can be sealed using a special iron or press.

Before placing the package in the freezer, attach a label to it with the designation of the contents and the date of freezing.

Precautions:

1. Plug the device into a properly installed and grounded exclusive wall outlet. Never cut or remove (for any reason) the third (ground) wire of the power cord. Any questions regarding power or grounding should be directed to a licensed electrician or center licensed to work on this type of product.
   Warning: If the grounded outlet is used improperly, there may be a risk of electric shock.

2. The socket of the installation must always have an earth connection. If the power supply is not connected to earth; you do not need to connect the device

3. Do not throw water on the refrigerator: it can cause equipment failure or risk of electric shock.

4. Do not store or use gasoline or other flammable gases or liquids near this appliance. The fumes can cause a fire or an explosion.

FEATURES
The most important feature of this device is:
Automatic defrosting of the refrigerator cell. The defrost water is conveyed into a tank placed on the compressor. From where it evaporates with the heat generated during the refrigeration process.

WARNING!
When you install your refrigeration appliance, it is important to take into account the climatic class of the product. To find out which climatic class your refrigerator belongs to, please check the data plate as shown below: The refrigerator operates correctly within the ambient temperature range indicated in the table, according to the climatic class.

ELECTRICAL CONNECTION

• Check that the voltage values of the electrical network can withstand those indicated on the characteristics plate placed at the bottom left of the internal part of the refrigerator. If the socket is not equipped with an earth connection, or if the plug is not suitable for your network, we advise you to contact a specialized electrician.
• Do not use adapters or shunts to avoid overheating and burns. If the device is not equipped with an electrical outlet, it must be connected to the network by means of a switch which will be connected directly to the power supply terminals. This switch must guarantee single-pole disconnection of the device with contact separation not less than 3 mm.

MAINTENANCE

It is advisable to periodically clean the refrigerator:

1. externally, with a cloth soaked in a solution of lukewarm water and liquid soap and then rinse with clean water;
2. inside, remove the plug from the socket, wait for the appropriate compartment to defrost; the interior of the refrigerator, the grilles, the shelves can be cleaned with lukewarm water and baking soda, rinsed with water and wiped dry; do not use abrasive detergents and take care that water does not enter the thermostat box. In the rear part of the thermostat box is the internal lighting lamp. If the appliance is to remain inactive for a long time, it is advisable to disconnect the power and leave the door ajar to avoid the formation of bad smells.

TECHNICAL ASSISTANCE
Before calling the After-Sales Service, if the refrigerator is not working, check that the power plug is correctly inserted in the socket and that the thermostat is not in operation.

Use

1. Before connecting the appliance to the electrical current, leave it to stand for about two hours. This will reduce the risk of malfunction in the cooling system, due to handling during transport. Run your product about 2/3 hours before adding food
   WARNING: To avoid a hazard caused by instability of the appliance, it must be installed and fixed in accordance with the instructions in the installation manual.

2. Using the thermostat:
   To regulate the temperature in the refrigerator, turn the thermostat knob from right to left. The thermostat can be set to a position from “0” (off) to “7” (coldest).
   For normal use, please select position “4-5”

3. Do not put too much food in the device. Do not open the door too often to maintain the interior temperature and save electricity.

Defrost:

• In order to allow the device to operate correctly, it is necessary to carry out defrosting at least once a year or when the layer of ice is greater than 10 mm.
• You can occasionally remove the layer of ice that has formed using a squeegee or any other plastic instrument.
• NEVER USE A METALLIC INSTRUMENT OR ELECTRICAL APPLIANCE TO DEFROST.

Warnings :

• When defrosting, never use a sharp or metallic object to remove the ice on the surface of the evaporator to avoid damaging the latter.

Reconnect the power again after more than 15 minutes.
To defrost:

• To defrost the device, choose a period when your device is not overloaded. Remove all the food, put it in another refrigerator or in a very cool place. Set the thermostat to the off position (0), unplug the appliance and open the door. Once the frost has melted, drain the water and dry the inside of the refrigerator. Wait 15 minutes and then plug the device back in. The refrigerator can then be restarted by turning the thermostat to the desired setting.

CARE AND MAINTENANCE

1. Cleaning your Refrigerator:
2. Unplug the appliance
3. Wash the inside with hot water and a baking soda solution. For this, add about 2 teaspoons of baking soda to a liter of water.
4. Wash shelves and trays with a mild detergent solution. The exterior of the appliance should be cleaned with a mild detergent and warm water.

Positioning
Install this device in a place where the ambient temperature corresponds to the climate class indicated on the rating plate of the device:

Location
The device should be installed away from heat sources such as radiators, boilers, direct sunlight, etc. Make sure that air can circulate freely at the back of the cabinet. To ensure best performance, if the appliance is placed under an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit should be at least 100mm. Ideally, however, the device should not be placed under hanging units. Precise leveling is ensured by one or more adjustable feet at the base of the cabinet.

For refrigerating appliances with a climate class:

• extended temperate (SN): this refrigeration appliance is intended for use at ambient temperatures between 10°C and 32°C;
• temperate (N): this refrigeration appliance is intended for use at ambient temperatures between 16° C and 32° C;
• subtropical (ST): this refrigeration appliance is intended for use at ambient temperatures between 16° C and 38° C;
• tropical (T): this refrigeration appliance is intended for use at ambient temperatures between 16°C and 43° C.

Warning!
It must be possible to disconnect the device from the mains; the plug must therefore be easily accessible after installation.

Meaning of the labeling* of freezers

1. (), 2- (), and 3-star () freezers are not suitable for freezing fresh food.
   The 2 star (**) and 3 star (***) freezers are suitable for storing frozen (pre-frozen) food and ice cream or for making ice cream and ice cubes .

REVERSING THE DOOR OPENING DIRECTION

1. Remove the top hinge cover.
2.  Remove the top hinge.
3. Remove the 4 protections.
4. Remove the freezer door, then remove the middle hinge.
5. Remove the right door stopper (unused) from the bottom of the freezer door.
6. Remove the plug from the left hole of the refrigerator door, then install it on the right side.
7. Remove two hinge covers on the left and install them on the right side.
8. Install the left door stopper (inside the plastic bag) using the screw removed from the front right side.
9. First remove the right hinge from the bottom of the refrigerator door and remove the hinge hole plug, then install it on the left.
10. Remove the right door stopper (no longer used) from the bottom of the refrigerator door.
11. Install the left door stopper (inside the plastic bag) using the screw removed from the front right side.
12. Install the lower hinge on the left side.
13. Install the middle hinge on the left, then install the freezer door, top hinge, hinge cover and hole cover one by one.

FAULTS AND SOLUTIONS

FAULT DIAGNOSTIC GUIDE

1. The refrigerator does not work, the light does not work:
2. The appliance is not plugged in
3. The switch is in the off position.
4. The bulb is burned out
5. The refrigerator is not cold enough:
6. Thermostat temperature not set correctly.
7. The external environment may require a higher setting.
8. The door is opened too often, or the door is not completely closed.
9. The door seal is not tight enough.
10. There is not enough space between the appliance and the rear and side walls.
11. The refrigerator seems to be making too much noise:
12. The rustling may come from the flow of the refrigerant, which is normal.
13. At the end of each cycle, you may hear gurgling sounds due to the flow of refrigerant through your appliance.
14. Contraction and expansion of the interior walls may cause crackling and popping noises.
15. Unit is not level.

Remark :

• Avoid placing the device in damp places. If there is too much humidity in the air, frost will quickly form on the evaporator.
• During periods of high relative humidity, condensation may form on the surface of the refrigerator. It is not a malfunction. Clean the surface. If the refrigerator does not operate correctly after all these checks, contact the technical service without further delay.
• Keep the invoice or proof of purchase of the product to be able to use the guarantee. For any questions during use, please contact your store.

COLDEST ZONE OF THE REFRIGERATOR

• The symbol opposite indicates the location of the coldest zone of your refrigerator. This zone is delimited at the bottom by the window of the vegetable drawer, and at the top by the symbol or the shelf positioned at the same height.
• In order to guarantee the temperatures in this zone, take care not to change the position of this shelf. In forced-air refrigerators (equipped with a fan or No Frost models), the symbol of the coldest zone is not represented because the temperature inside them is homogeneous.

INSTALLING THE TEMPERATURE GAUGE

• To help you properly adjust your refrigerator, it is equipped with a temperature indicator that will allow you to monitor the average temperature in the coldest zone.
• CAUTION : This indicator is designed to work only with your refrigerator, be careful not to use it in another refrigerator (indeed, the coldest area is not the same), or for any other use.

CHECKING THE TEMPERATURE IN THE COLDEST ZONE

• Thanks to the temperature indicator, you can regularly check that the temperature of the coldest zone is correct. Indeed, the temperature inside the refrigerator is a function of several factors such as the ambient temperature of the room, the quantity of stored foodstuffs, the frequency of opening the door. Take these factors into consideration when setting up the device.
• When the indicator shows “OK”, it means that your thermostat is correctly adjusted, and that the indoor temperature is correct.
• If the indicator color is white, it means the temperature is too high, in this case, increase the thermostat setting and wait 12 hours to carry out a new visual check of the indicator.
• After loading or opening the door, the indicator may become white after a few moments.

Tips – Energy saving

• Install the appliance in a cool, dry and suitably ventilated room.
• Take care not to expose the device to direct sunlight and never place it near a direct heat source (near a radiator, for example).
• Never block the ventilation holes or grilles of the device.
• Allow food to cool before placing it in the appliance.
• Place frozen products in the refrigerator to thaw them.
• The low temperature of frozen products will help cool the food in the refrigerator.
• Defrost freezer when ice builds up. A thick layer of ice risks altering the transfer of cold to the frozen products and thus increasing the appliance’s energy consumption.
• Do not leave the appliance doors open for too long when putting food in or removing food from the appliance.
• The less ice will form in the freezer if you leave the door open for as short a time as possible.
• When you freeze food or want to store it in the freezer, place it directly in the upper freezer compartment.

DISPOSAL

• This logo affixed to the product means that it is a device whose treatment as waste falls within the framework of the directive 2012/19 / UE of January 4, 2012, relative to the waste of electrical and electronic equipment (WEEE).
• The presence of hazardous substances in electrical and electronic equipment can have potential effects on the environment and human health in the reprocessing cycle of this product.
• Thus, at the end of the life of this appliance, it must not be disposed of with unsorted municipal waste.
• As a final consumer, your role is paramount in the cycle of reuse, recycling and other forms of recovery of this electrical and electronic equipment.
• Recovery and collection systems are made available to you by local authorities (waste disposal centers) and distributors.
• You have the obligation to use the selective collection systems available to you.

WARRANTY

Your refrigeration appliance is guaranteed by the manufacturer for a period of 24 months from the date of purchase (proof of purchase dated as proof).

WARRANTY EXCLUSIONS:
The warranty does not cover wear parts of the product, nor problems or damage resulting from:

1. surface deterioration due to normal wear and tear of the product;
2. defects or deterioration due to contact of the product with food or liquids and due to corrosion caused by rust;
3. any unauthorized incident, abuse, misuse, modification, disassembly or repair;
4. any improper maintenance operation, use not in accordance with the instructions concerning the product or connection to an incorrect voltage;
5. any use of accessories not supplied or approved by the manufacturer.

Information: The guarantee cannot be applied in the absence of the nameplate and I or the serial number of the device.

REPAIR SERVICES

• In the event of a malfunction during the period of the manufacturer’s warranty: any request for support must be made to the professional reseller from whom you purchased your product.
• After the expiration of the manufacturer’s warranty period: consult the document “Spare parts and repair” in the documentation relating to your refrigeration appliance available on the site www.oceanic.eu

SPARE PARTS

• The spare parts needed to repair your refrigeration appliance are available for at least 7 years, in accordance with the European regulation on the ecodesign of refrigeration appliances.
• Consult the document “Spare parts and repairs” in the documentation relating to your refrigeration appliance available on the site www.oceanic.eu, it will provide you with information on:
  • the duration of availability for each spare part
  • how to order spare parts
  • professional repair services

SPARE PARTS AND REPAIR – Refrigeration appliance

Date: 08/11/2022

PROCEDURE FOR ORDERING SPARE PARTS

Professional repairers :

• Schneider Consumer Services, email : p.blanc@schneiderconsumer.com
• Delivery time: 15 working days from receipt of order.

PROCEDURE FOR ORDERING SPARE PARTS – End user :

• Schneider Consumer Services, email : p.blanc@schneiderconsumer.com
• Delivery time : 15 working days from receipt of order.

Professional repair services:

• In the event of a malfunction during the manufacturer’s warranty period: all claims should be made to the professional dealer from whom you purchased your product.
• After the expiry of the manufacturer’s warranty period, you can use the following repair services:
  • Schneider Consumer Services,
  • 26 allee du clos des charmes – 77090 Collegien
  • email : p.blanc@schneiderconsumer.com

OCEANIC – 1 20-126, Quai de Bacalan – CS 11584 – 33067 Bordeaux CEDEX
Imported by SCHNEIDER CONSUMER GROUP
12, rue Jules Ferry, 93110 Rosny-sous-Bois, FRANCE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>