LUMASCAPE ERDEN E4 LS3040 with Tall Tube Instruction Manual

LUMASCAPE ERDEN E4 LS3040 with Tall Tube

Please read and follow all safety instructions carefully. Failure to do so will void the warranty.

Safety Instructions

WARNING
Product Warranty is void if the product is not installed as per installation instructions and in compliance with all local and provincial codes.

• Ensure installation complies with local electrical rules and regulations.
• All electrical work must be performed by a licensed electrician.
• Protective earth; protective ground (symbol 7).
• All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting the luminaire as it may become hot.
• Luminaire should only be used complete with a protective shield. If the protective shield is cracked, immediately stop using luminaire. Isolate the light source, keep it dry and immediately contact Lumascape for replacement of the protective shield (symbol 11).
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
• The light source contained in this luminaire shall only be replaced by Lumascape or its service agent.
• Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 23’ (7 m) is not expected (symbol 13)
• Basic insulation has been maintained between the line voltage and the control conductors.
• To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
• Ensure mains input power is surge protected.
• Never make or break connections while the circuit is energized.
• Do not make modifications or alter the product.
• Keep luminaire clean and free of debris.
• Only clean with warm water.
• Do not use chemicals or abrasives to clean the luminaire as this may void the product warranty.
• Connections are to be kept clean and dry at all times.
• Suitable for use indoors or outdoors.

Specification

• MODEL LS3040
• PART NUMBER LS3040 – 16W xxx x x xx xx 26 x 09 xx
• INSTALLATION TYPE INGROUND/IN-GRADE (Tall Tube)
• IP RATING IP66/67 (Passes IP68 Test)
• SUPPLY VOLTAGE 120/277 ~Vac, 60 Hz
• INSTRUCTIONS COVER PowerSync®
• DIMENSIONS (LxWxH) Refer to included drawings
• WEIGHT 9.9 lbs (4.5 kg)
• SURFACE TEMPERATURE < 149ºF (65ºC)
• STATIC LOAD RATING 3,968 lbs (1,800 kg) Luminaire Only

Tools Required Luminaire

Included Components

Tools Required Installation Kit

Optional Accessories

Accessoires optionnels

• Do Not Use Power Tools on Screws
• Keep Electronics Free From Dirt and Moisture
• No Downward Force
• Keep Away from Flammable Materials
• Do Not Hose or Pressure Clean
• Do Not Overtighten
• Do Not Use Silicone On Outside Surface
• Do Not Cut Cable to the Luminaire

Assembly Instructions

Optional Glare Control Accessories

Wiring Designations

Line Voltage 120/277 Vac – North America

Designation/Color

• Line Black
• Neutral White
• Ground/Earth Green / Yellow
• Data Orange or Red

Do not Hi-Pot test

Dimensions

Supply Connection Type

Please recycle the aluminum trim according to Local Government Guidelines.

ARCHITECTURAL & FACADE LIGHTING | Learn more. Visit lumascape.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>