RUGGED RIDGE 13551.23 Dash Multi Mount Phone Kit Installation Guide

June 13, 2024
RUGGED RIDGE

RUGGED RIDGE 13551.23 Dash Multi Mount Phone Kit

Product Information

The Dash Multi-Mount Phone Kit, JL is a versatile mounting system designed to securely hold various accessories in your vehicle’s dashboard. The kit includes the following components:

  1. Multi-Mount Tray (1)
  2. Universal Ball Mount (1)
  3. Cap Piece (1)
  4. 17mm Ball Phone Mount (1)

The Dash Multi-Mount System offers four configurations:

  • No Accessory
  • Phone/GPS Mount Only*
  • Camera/Tripod Mount Only
  • Phone and Camera Mount*

Product Usage Instructions

Installation:

  1. Step 1: Remove the interior rubber liner from the designated area by prying a corner to lift it.
  2. Step 2: Remove the two Phillips screws from inside the compartment.
  3. Step 3: Place the Multi-Mount System into position, ensuring that the area is completely clean before installing.
  4. Step 4: Reinstall the Phillips screws removed in Step 2 through the Multi-Mount System into the dash.

Mounting a Phone:

  1. Place the Outer Ring over the end of the Ball Mount.
  2. Press the Phone Mount adapter piece into the Ball Mount.
  3. Pull the Outer Ring over the Phone Mount adapter and twist to secure it.

Components

  1. Multi-Mount Tray (1)
  2. Universal Ball Mount (1)
  3. Cap Piece (1)
  4. 17mm Ball Phone Mount (1)RUGGED-RIDGE-13551.23-Dash-Multi-Mount-Phone-Kit-fig-1

Four Configurations for Dash Multi-Mount System

*Shown with Rugged Ridge Phone Mount (Part #13551.13)

RUGGED-RIDGE-13551.23-Dash-Multi-Mount-Phone-Kit-fig-2

DASH MULTI-MOUNT PHONE KIT, JL

  • Step 1
    Remove interior rubber liner. May need to pry a corner to lift.

  • Step 2
    Remove two Phillips screws from inside compartment.

  • Step 3
    Place Multi-Mount System into position. Assure area is completely clean before installing.

  • Step 4
    Reinstall Phillips screws removed from step 2 through multi-mount system into the dash.RUGGED-RIDGE-13551.23-Dash-Multi-Mount-Phone-Kit-
fig-3

  1. Place Outer Ring over end of Ball Mount.
  2. Press Phone Mount adapter piece into Ball Mount.
  3. Pull Outer Ring over Phone Mount adapter and twist to secure.RUGGED-RIDGE-13551.23-Dash-Multi-Mount-Phone-Kit-fig-4

Copyright © 2018 Omix-Ada®, Inc.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

RUGGED RIDGE User Manuals

Related Manuals