RUGGED RIDGE 13550.36 Stinger Off Road Jeep Audio And Electronics Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 13550.36 Stinger Off Road Jeep Audio And Electronics
Parts List
Item | Part Name | Qty. |
---|---|---|
A | Housing | 1 |
B | MaxTrak | 2 |
C | Cargo Shield | 1 |
D | Bulkhead Flashing | 1 |
E | Threaded Block | 4 |
F | Width Adjustment Shim | 2 |
G | Leveling Shim | 2 |
H | #8 x 3/4″ Self Tap Screw | 2 |
I | #10-24 Screw | 2 |
J | Cargo Nut | 2 |
K | 5/16″ Socket Cap Screw | 4 |
L | 5/16″ Lock Washer | 4 |
M | 5/16″ Flat Washer | 4 |
N | Allen Wrench (1/4″) | 1 |
O | 1/4-20 x 3/8″ Screw | 4 |
P | Rubber Washer | 4 |
Q | 1/4″ Lid Screws | 2 |
R | Drain Tube | 2 |
S | Caulk Strips | 2 |
T | Mounting Channel | 2 |
U | 6mm x 25mm Pan Head | 8 |
303 Vinyl Protector | 1 |
Tools Needed
Mounting Instructions
Troubleshooting
Cover is hard to pull or retract| | Spray 303® on a rag and wipe the top
gasket in the Track back and forth.|
---|---|---|---
Cover does not latch.| | Check track to track measurement.|
Cover does reach tailgate.| | Make sure Tracks are back against tailgate.|
Track tips up or down.| | Add shim as needed.|
Customer Service
Any questions please call Customer Service at 770-614-6101 or visit www.omixsupport.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>