RUGGED RIDGE 460 Tire Carrier Delete Plate Instruction Manual
- June 13, 2024
- RUGGED RIDGE
Table of Contents
Part #11586.10
11586.11
Tire Carrier Delete Plate
Components
1. Delete Plate
For 11586.11 Only:
2. License Plate Bracket
3. Brake Light Bracket| (1) 4. Hex Head Screw
5. Phillips Head Screw
6. Hex Nut
(1) 7. Washer
(1) 8. Fender Washer| (4)
(4)
(4)
(4)
(8)
---|---|---
- Remove spare tire and tire carrier.
- Clean area underneath tire carrier.
- Install Tire Carrier Delete Plate using OE Bolts. If installing Tire Carrier Delete Plate Kit 11586.11, do not install top two bolts. Retain for later use.
For 11586.11: - Using provided Phillips Head screws, attach third brake light to Brake Light Bracket.
- Using provided Hex Bolts, Washers, and Nuts, attach lisence plate to Lisence Plate Bracket
- Place Third Brake Light assembly in opening of Lisence Plate Bracket.
- Align all holes with Tire Carrier Delete Plate and attach using OE Bolts.
- Reattach Third Brake Light power plug.
Copyright © 2016 Omix-Ada® , Inc.
OMIX-ADA ®
TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST
1-800-449-6649
EMAIL:techsupport@omix-ada.com
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>