Barthelme 6204XX Scotto S Ground Recessed LED Luminaire Instruction Manual
- June 13, 2024
- Barthelme
Table of Contents
Barthelme 6204XX Scotto S Ground Recessed LED Luminaire
Product Information
- Product Name: Scotto S LED Luminaire
- Article Number: 6204XX##; XX=Color temperature | ##=Beam angle
- Voltage: 24 V
- Power: 5.3 W
- Material: SUS 316 Stainless Steel
- LED-Netzteil: IP67
- Manufacturing Date: October 2022
INSTALLATION MANUAL.
Thank you for choosing this high-end Barthelme product. To ensure the proper and safe use all instructions of this Manual need to be considered.
All Scotto S LED luminaire include one manual and should you pass this product to a third party, please also include this manual. If the product will be modified or is not installed according to this manual any guaranty and warranty claims will expire immediately.
Scotto S IP 66 LED luminaires are designed for general outdoor- and indoor lighting at an ambient temperature of -20° to + 40° C. The installation needs to be performed by a certified electrician under consideration of the instruction manual on the back side. Product is just allowed to be used if the spotlight works properly. If you recognize any malfunction, please switch of the luminaire, and only use it aver an effective review by an electrician.
Scotto Luminaires are maintenance free and long lasting. Clean the LED luminaire with a soft, slightly damp cloth. To remove more severe stains, use a standard cleansing material without abrasive elements Electronic and electrical waste may not be disposed of in the household rubbish. If you have any questions regarding the disposal, please contact your local waste management company.
- ITEM NO. 6204XX##;
- XX=Color temp. | ## = Beam angle
- VOLTAGE (V) 24 V
- WATTAGE (W ) 5,3 W
- COLOR TEMP. (K) See data sheet
- LUMEN (LM) See data sheet
- BEAM ANGLE (°) See data sheet
- EFFICIENCY (LM/ W) See data sheet
- DIMENSIONS (MM) Luminaire: Ø 50 mm | H = 61 mm
- Installation sleeve : Ø 47 mm | H = 90 mm
- AMBIENT TEMP. (° C) – 20° C bis + 40° C
- MATERIAL COVER SUS 316 stainless steel
- ACCESSORY LED- Driver
This product meets the requirements of the applicable Euro-pean and national
directives. Conformity has been demon-strated and the relevant documentation
is on file with the manufacturer and can be requested there.
Scotto S Luminaires (article codes 6204XX##) include the Light Source LQ6204
with energy efficiency F.
Further Information are included in the data sheet of the luminary under www.barthelme.de. The Light Source can be found in the EPREL database. Other languages of this manual can also be downloaded via our Homepage www.barhtelme.de
WARNING
improper installation can be extremely dangerous.