ROUGH COUNTRY 921710690 Tundra Ditch Light Mounts Instruction Manual
- June 13, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 921710690 Tundra Ditch Light Mounts
Product Information
The TOYOTA 2022 Tundra Ditch Light Mounts are a kit designed to provide a mounting solution for cube lights on the Tundra vehicle model. The kit includes two brackets for secure installation. The product is compatible with the Tundra model released in 2022.
Kit Contents:
- Brackets x2
Tools Needed:
- 10mm Socket/Wrench
Torque Specs
| Size | Grade | Torque (ft/lbs) |
|---|---|---|
| 5/16 | Grade 5 | 15 |
| 3/8 | Grade 5 | 30 |
| 7/16 | Grade 5 | 45 |
| 1/2 | Grade 5 | 65 |
| 9/16 | Grade 5 | 95 |
| 5/8 | Grade 5 | 135 |
| 3/4 | Grade 5 | 185 |
| 5/16 | Grade 8 | 20 |
| 3/8 | Grade 8 | 35 |
| 7/16 | Grade 8 | 60 |
| 1/2 | Grade 8 | 90 |
| 9/16 | Grade 8 | 130 |
| 5/8 | Grade 8 | 175 |
| 3/4 | Grade 8 | 280 |
| 6MM | Class 8.8 | 5 |
| 8MM | Class 8.8 | 18 |
| 10MM | Class 8.8 | 32 |
| 12MM | Class 8.8 | 55 |
| 14MM | Class 8.8 | 85 |
| 16MM | Class 8.8 | 130 |
| 18MM | Class 8.8 | 170 |
| 6MM | Class 10.9 | 9 |
| 8MM | Class 10.9 | 23 |
| 10MM | Class 10.9 | 45 |
| 12MM | Class 10.9 | 75 |
| 14MM | Class 10.9 | 120 |
| 16MM | Class 10.9 | 165 |
| 18MM | Class 10.9 | 240 |
Product Usage Instructions
- Remove the rubber coving from the corners of the wiper cowl. Refer to Photo 1.
- Remove the bolt under the rubber coving using a 10mm socket/wrench. Refer to Photo 2.
- Install the cube light to the bracket using the hardware supplied with the light. Refer to Photo 3.
- Install the light to the vehicle using the stock bolt. Refer to Photo 4. Open the hood and run the wiring to the power source on the
- outside of the hood hinge and out of harm’s way. Refer to Photo 5.
- Reinstall the rubber covering around the bracket. Refer to Photo 6.
Note: Please ensure to follow the specified torque specs when tightening bolts to ensure proper installation and secure fitment.
TOYOTA 2022 Tundra Ditch Light Mounts
Thank you for choosing Rough Country for all your vehicle needs. Please read the instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go. If a question exists, please call us at @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components. Periodically check all hardware for tightness.
Kit Contents
- Brackets x2
Tools Needed
- 10mm Socket/Wrench
Torque Specs
INSTALLATION INSTRUCTIONS
- Remove the rubber coving from the corners of the wiper cowl. See Photo 1.
- Remove the bolt under the rubber coving using a 10mm socket/wrench. See Photo 2.
- Install the cube light to the bracket using the hardware supplied with the light. See Photo 3.
- Install the light to the vehicle using the stock bolt. See Photo 4.
- Open the hood and run the wiring to the power source on the outside of the hood hinge and out of harms way. See Photo 5.
- Reinstall the rubber covering around the bracket. See Photo 6.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyer’s responsibility to comply with all Federal, State, and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>