SOMOGYI FZ 53 Indoor Amplified Antenna Instruction Manual
- June 4, 2024
- SOMOGYI
Table of Contents
SOMOGYI FZ 53 Indoor Amplified Antenna
DESCRIPTION
- antenna
- adapter
- support
- fittings
ANALOG & DIGITAL RECEPTION
DVB-T/T2, DAB, FM, VHF-UHF
VHF: 87,5-230 MHz
UHF: 470-790 MHz
75 Ohm ~2m / max.53 dB
noise ≤3dB / out 100dBμVmax.
DTV/STB: 5V / 40 mA
AC / DC POWER ADAPTOR
PRI: 100-240 V~ / 50/60 Hz
PRI: 200 mAmax.
SEC: 5 V / 200 mAmax.
SEC: 1,0 W max.
USB-DC cable, ~1.4m
-(.+
Safety and maintenance
IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER
REFERENCE!
WARNINGS
- Before use of the product, please read this instructions manual and keep it for future reference. The original document was prepared in the Hungarian language. This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the use of the appliance and understand the hazards involved. Children may not play with the appliance. Children may perform the cleaning or user maintenance of the appliance subject to supervision. After removal of the packaging, inspect the product for possible damage during shipment. Keep the packaging away from children if it contains plastic bags or other potentially hazardous items.
- Protect the device from dust, humidity, liquids, moisture, frost, and shocks, as well as from direct heat and sunlight. Only for use under dry, indoor conditions.
- Prevent foreign objects from entering the device through its openings.
- Should you notice any irregularity or if the adapter is damaged, disconnect the appliance immediately and seek the help of a professional.
- Use it with the supplied mains adapter only.
- Never connect the adapter to the mains with wet hands.
- When not in use, disconnect the appliance by unplugging the mains adapter.
- Do not use the adapter to operate or charge other devices.
- Keep the device in a place, where the power supply plug can be easily reached and unplugged. Run the power supply cable so that it cannot be accidentally disconnected, and it does not create a risk of stumbling. Do not run the power supply cable under a carpet, door mat, etc.
- Do not dismantle, or modify the device, as it may cause fire, accidents or electric shock.
- This product is for private use, it is not intended for industrial applications.
- If the charger is not operated or handled in accordance with the instructions, this will void the warranty and guarantee.
- After the useful life of the product, it is to be considered as hazardous waste. Dispose of the product according to local legislation.
- Somogyi Elektronic Kft certifies that the appliance complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at somogyi@somogyi.hu.
- Due to continuous development, the technical specifications and design of this product may change without prior notice. The most recent instructions manual is available for download from the www.somogyi.hu website.
- However we regret such inconvenience, we do not take any responsibility for possible printing errors.
DISPOSAL
Waste equipment must be collected and disposed of separately from household
waste because it may contain components hazardous to the environment or
health. Used or waste equipment may be dropped off free of charge at the point
of sale, or at any distributor which sells equipment of identical nature and
function. Dispose of products at a facility specializing in the collection of
electronic waste. By doing so, you will protect the environment as well as the
health of others and yourself. If you have any questions, contact the local
waste management organization. We shall undertake the tasks pertinent to the
manufacturer as prescribed in the relevant regulations and shall bear any
associated costs arising.
Functions
- for the reception, if radio and TV broadcasts
- for analog and digital broadcasting
- 3D design with fabric pattern
- outstanding sensitivity
- built-in low noise amplifier
- horizontal or vertical positioning, placement on furniture or a wall
- connection cable with coaxial plug
- dual power supply option
- power supply via coaxial cable from the receiver or the included USB mains adapter
- dimensions: 300 x 100 x 30 mm
APPLICATION
Optimal for receiving analog or digital terrestrial radio and TV broadcasts.
With its built-in amplifier, the appliance ensures good reception even despite
the small size. It can be mounted on either walls or furniture. Typical
applications: DVB-T/T2 TV reception, Set Top Box, HiFi system FM radio
(ISDB-T, DMB-T/H, ATSC, DAB radio…) Before purchasing, please check the
reception options available at the site of the application.
PUTTING INTO USE
- Connect the coaxial antenna plug to the receiver (television, radio, set-top box…) switched off.
- Connect the cable of the USB mains adapter to the adapter and then to the box located on the antenna cable. Plug the adapter into a mains socket.
- The LED on the box indicating operation will light up.
- Turn on the receiver and tune in the desired programs.
- Slowly change the antenna position to find the location for optimal reception.
- You can mount it on furniture or a wall in either a horizontal or vertical position. We recommend putting it on furniture, as you can find the position for the best reception easier this way by turning it around. Reception differences may occur between the vertical and horizontal positioning, therefore try both options. A program with weak reception may also be broadcast on another channel providing better quality. Tune your device along the entire band.
- If the connected TV or STB unit can supply power to the antenna via the coaxial cable, you will not need to use the mains adapter. You can check this in the operating instructions of the connected device.
- To disconnect the appliance from the mains, you have to unplug the mains adapter in all cases. Do this when you do not plan to use the product.
LOCATION
The quality of the reception is greatly influenced by the placement of the
antenna. Do not place it close to electrical appliances or larger metal
objects, as they may interfere with the reception. In particular, keep it away
from Wi-Fi routers, computers or microwave ovens. Find the ideal position by
relocating and moving the antenna. The included table support is also suitable
for wall mounting. Remove the rear plastic nut and secure the support to the
antenna. Adjust the support to the required position.
- The reception and quality of a given program depends primarily on the geographical conditions.
- Check if there is a transmission tower within the optimal reception distance.
CLEANING, MAINTENANCE
Check the contact of all connectors for stability from time to time. Remove
any dirt from the coating with a soft, dry cloth. Do not use aggressive
cleaning agents! Do not allow liquids to spill on or enter the device. It does
not require any special maintenance; if you experience a fault, please turn it
off and contact an expert.
External power supply specifications external power supply
Manufacturer’s name or trademark, commercial registration number and address| 9027 Győr, Gesztenyefa út 3.
08-09-002824
---|---
Model identifier| S050020U-EU
Input voltage| 100-240 V~
Input AC frequency| 50 / 60 Hz
Output voltage| 5,0 V
Output current| 0,2 A
Output power| 1,0 W
Average active efficiency| 69,87 %
Efficiency at low load (10%)|
No-load power consumption| 0,05 W
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2,
Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 •
www.somogyi.ro
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>