KENDAL LIGHTING MSP305-BLK Magnetic Track Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
PENDANT LIGHT FIXTURE- MSP305
WIRE ADJUSTMENT INSTRUCTIONS
MSP305-BLK Magnetic Track
PARTS INCLUDED WITH FIXTURE:
(a) PENDANT
(b) END CAP
(c) WIRE CONNECTOR
(d) TOP COVER
LOOSEN PLASTIC SET SCREW(e) AND GENTLY PULL CORD
TO SHORTEN OR LENGTHEN THE PENDANT TO DESIRED HEIGHT. ONCE CORD IS AT DESIRED
LENGTH, TIGHTEN PLASTIC SET SCREW TO HOLD CORD IN PLACE.
CUT THE CORD AND STRIP THE RED + BLACK WIRE ENDS
INSERT WIRES INTO CONNECTOR (c) BY OPENING LEVERS ON THE CONNECTOR,
INSERTING WIRES, THEN CLOSING THE LEVERS.
NOTE: RED WIRE FROM FIXTURE SHOULD BE INSERTED DIRECTLY IN LINE WITH PRE-
INSTALLED RED WIRE FROM MAGNET BOX; BLACK WIRE FROM FIXTURE SHOULD BE INSERTED
DIRECTLY IN LINE WITH BLACK WIRE FROM MAGNET BOX
ONCE WIRE CONNECTORSARE
SECURED, CAREFULLY TUCK THE CONNECTOR (c) AND WIRES INTO THE OPENING OF THE
MAGNET BOX
INSERT END CAP (b) UNDERNEATH SCREW INMAGNET BOX AND
TIGHTEN SCREW, ONC! SCREW HAS BEEN TIGHTENED, PLACE TOP COVER (d) OVER SCREW
ACCESS OPENING AND PUSH DOWN TO SNAP INTO PLACE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>