KENDAL LIGHTING MSP304-WH White Magnetic Track LED Cone Pendant Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
PENDANT LIGHT FIXTURE- MSP304
WIRE ADJUSTMENT INSTRUCTIONS
PARTS INCLUDED WITH FIXTURE:
(a) PENDANT
(0) END CAP.
(c) WIRE CONNECTOR
(d) TOP COVERLOOSEN PLASTIC SET SCREW/(e)
AND GENTLY PULL CORD TO SHORTEN OR LENGTHEN THE PENDANT TO DESIRED HEIGHT.
ONCE CORD 1S AT DESIRED LENGTH, TIGHTEN PLASTIC SET ‘SCREW TO HOLD GORD IN PLACE.
CUT THE CORD AND STRIP THE RED
- BLACK WIRE ENDS
INSERT
WIRES INTO CONNECTOR (c) BY OPENING LEVERS ON THE CONNECTOR, INSERTING WIRES,
THEN CLOSING THE LEVERS.
NOTE: RED WIRE FROM FIXTURE SHOULD BE INSERTED DIRECTLY IN LINE WITH PRE- INSTALLED RED WIRE FROM MAGNET BOX; BLACK WIRE FROM FIXTURE SHOULD BE INSERTED DIRECTLY IN LINE WITH BLACK WIRE FROM MAGNET BOX.
ONGE WIRE CONNECTORS ARE SECURED, CAREFULLY TUCK THE
CONNECTOR (c) AND WIRES INTO THE OPENING OF THE MAGNET BOX.
INSERT END CAP (b) UNDERNEATH SCREW.
INMAGNET BOX AND TIGHTEN SCREW, ONCE SCREW HAS BEEN TIGHTENED, PLACE TOP COVER (d) OVER SCREW ACCESS OPENING.
AND PUSH DOWN TO SNAP INTO PLAGE.
INSTALLATION INSTRUCTIONS
INSTALLING THE LIGHT FIXTURE
CORRECT STEPS
FOR MOVING THE LIGHT FIXTURES
Documents / Resources
|
KENDAL LIGHTING MSP304-WH White Magnetic Track LED Cone
Pendant
[pdf] Instruction Manual
MSP304-WH White Magnetic Track LED Cone Pendant, MSP304-WH, White Magnetic
Track LED Cone Pendant, Magnetic Track LED Cone Pendant, Track LED Cone
Pendant, LED Cone Pendant, Cone Pendant, Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>