KENDAL LIGHTING MSAR15-BLK Magnetic Track Recessed T Joiner Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
TRIMLESS RECESSED TRACK
TRACK CORNER INSTRUCTIONS
MSAR15 “T” CORNER
PARTS INCLUDED
KENDAL MODEL MSAR15|
---|---
WHICH INCLUDES: 3 x MSA02|
3x MSA22|
DIMENSIONS
STEP 1
REMOVE END CAP FROM TRACK
STEP 2
INSTALL THE MSA22 PIN SET(b) INTO THE PIN CONNECTOR HOLES (c) ON THE TRACK.
SLIDE THE TRACK CONNECTOR (a) INTO THE SLOT ON THE BACK OF THE TRACK SO YOU
CAN STILL VISIBLY SEE THE PINS.
STEP 3
CONNECT “T” CORNER TO TRACK BY CAREFULLY LINING UP THE PIN SET ON THE TRACK
WITH THE PIN CONNECTOR HOLES ON THE MSAR15 “‘T” CORNER AND PUSH TOGETHER.
ATTENTION:
WHEN JOINING TRACKS OR ACCESSORIES UTILIZING PIN CONNECTORS, MAKE SURE PINS
ARE HORIZONTAL AND LINE UP WITH PIN CONNECTOR HOLES. YOU MAY NEED TO GENTLY
PUSH UP OR DOWN ON THE PINS SO THEY LINE UP CORRECTLY. FAILING TO DO THIS MAY
RESULT IN PINS MISSING THE PIN CONNECTOR HOLES AND LOSS OF THE 24 VOLT
CONNECTION.
STEP 4
SLIDE THE TRACK CONNECTOR (a) ONTO THE “T” CORNER AND SECURE WITH SET SCREWS.
STEP 5
CORNER AND COMPLETE TRACK CORNER CONNECTION.
NOTE:
AFTER EACH TRACK CONNECTIONACONTINUITY TEST SHOULD BE DONE TO ENSURE PROPER
ELECTRICAL CONNECTIONS WERE MADE.