KENDAL LIGHTING MSAR12-BLK Magnetic Track Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
TRIMLESS RECESSED TRACK
TRACK CORNER INSTRUCTIONS
MSAR12 “L” CORNER
PARTS INCLUDED:
KENDAL MODEL MSAR12 5
WHICH INCLUDES:
DIMENSIONS
STEP 1 REMOVE END CAP FROM TRACK
STEP 2 INSTALL THE MSA22
PIN SET(b) INTO THE PIN CONNECTOR HOLES (c) ON THE TRACK. SLIDE THE TRACK
CONNECTOR (a) ALL THE WAY INTO THE SLOT ON THE BACK OF THE TRACK SO YOU CAN
STILL VISIBLY SEE THE PINS.
STEP 3 SLIDE “L”” CORNER ONTO THE TRACK
CONNECTOR (a) WHILE CAREFULLY LINING UP THE PIN SET WITH THE PIN CONNECTOR
HOLES ON THE MSAR12″L” CORNER.
ATTENTION:
WHEN JOINING TRACKS OR ACCESSORIES UTILIZING PIN CONNECTORS, MAKE SURE PINS
ARE HORIZONTAL AND LINE UP WITH PIN CONNECTOR HOLES. YOU MAY NEED TO
GENTLYPUSH UP OR DOWN ON THE PINS SO THEY LINE UP CORRECTLY. FAILING TO DO
THIS MAY RESULT IN PINS MISSING THE PIN CONNECTOR HOLES AND LOSS OF THE 24
VOLT CONNECTION.
STEP4 SLIDE THE TRACK CONNECTOR (a) TOWARDS THE
L CORNER APPROXIMATELY HALFWAY AND SECURE WITH 4 SCREWS.
STEP5 REPEAT STEPS 1 THROUGH 4 FOR OTHER SIDE OF TRACK CORNER AND COMPLETE
TRACK CORNER CONNECTION.
NOTE:
AFTER EACH TRACK CONNECTION ACONTINUITY TEST SHOULD BE DONE TO ENSURE PROPER
ELECTRICAL CONNECTIONS WERE MADE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>