KENDAL LIGHTING MSAR13-BLK Magnetic Track Recessed Joiner Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
TRIMLESS RECESSED TRACK
TRACK CORNER INSTRUCTIONS
MSAR13 INNER CORNER
PARTS INCLUDED
KENDAL MODEL MSAR13|
---|---
WHICH INCLUDES: 2 x MSA02|
2x MSA22|
DIMENSIONS
STEP 1 REMOVE END CAP FROM TRACK
STEP 1
REMOVE END CAP FROM TRACK
STEP 2
INSTALL THE MSA22 PIN SET(b) INTO THE PIN CONNECTOR HOLES (c) ON THE TRACK.
SLIDE THE TRACK CONNECTOR (a) INTO THE SLOT ON THE BACK OF THE TRACK SO YOU
CAN STILL VISIBLY SEE THE PINS.
STEP 3
SLIDE INNER CORNER ONTO THE TRACK CONNECTOR (a) WHILE CAREFULLY LINING UP THE
PIN SET WITH THE PIN CONNECTOR HOLES ON THE MSAR13 INNER CORNER.
ATTENTION:
WHEN JOINING TRACKS OR ACCESSORIES UTILIZING PIN CONNECTORS, MAKE SURE PINS
ARE HORIZONTAL AND LINE UP WITH PIN CONNECTOR HOLES. YOU MAY NEED TO GENTLY
PUSH UP OR DOWN ON THE PINS SO THEY LINE UP CORRECTLY. FAILING TO DO THIS MAY
RESULT IN PINS MISSING THE PIN CONNECTOR HOLES AND LOSS OF THE 24 VOLT
CONNECTION.
STEP 4
SLIDE THE TRACK CONNECTOR (a) TOWARDS THE INNER CORNER APPROXIMATELY HALFWAY
AND SECURE WITH 4 SCREWS.
STEP 5
REPEAT STEPS 1 THROUGH 4 FOR OTHER SIDE OF TRACK CORNER AND COMPLETE TRACK
CORNER CONNECTION.
NOTE:
AFTER EACH TRACK CONNECTIONA CONTINUITY TEST SHOULD BE DONE TO ENSURE
PROPER ELECTRICAL CONNECTIONS WERE MADE.
HOLES (c) ON THE TRACK. SLIDE THE TRACK CONNECTOR (a) INTO THE SLOT ON THE BACK OF THE TRACK SO YOU CAN STILL VISIBLY SEE THE PINS.
KENDAL LIGHTING MSAR13 BLK Magnetic Track Recessed Joiner – Dimensions 5
SLIDE INNER CORNER ONTO THE TRACK CONNECTOR (a) WHILE
STEP 3 CAREFULLY LINING UP THE PIN SET WITH THE PIN CONNECTOR HOLES ON THE
MSAR13 INNER CORNER.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>