WolfPack HDTV444K60 4K60 18Gbps 4X4 Seamless HDMI Matrix User Manual
- June 13, 2024
- WOLFPACK
Table of Contents
HDTV444K60 4K60 18Gbps 4X4 Seamless HDMI Matrix
Product Information:
The WolfPack 4K60 18Gbps 4X4 Seamless HDMI Matrix is a versatile
device that allows you to switch between different HDMI inputs and
outputs. It supports seamless switching, video wall, and multiview
functions. With 4 HDMI 2.0 inputs and 4 HDMI 2.0 outputs, it also
features audio independently switching and complies with HDCP 2.2
with EDID management. The device can be controlled using
front-panel push buttons, IR remote, RS232, TCP/IP, and an APP. It
supports resolutions up to 4K@60Hz 4:4:4.
Technical Datasheet:
Name | Resolution | Input ports | Output ports |
---|---|---|---|
4K60 18Gbps 4X4 Seamless HDMI Matrix with Video | 4K@60Hz,YUV4:4:4 8 bit, | ||
4K@30Hz/1080P/1080i/720P | 4HDMI2.0 with 43.5mm | 4HDMI2.0 with 43.5mm audio |
and 4*SPDIF
Packing Details:
- Matrix switch – 1 unit
- Power cord – 1 piece
- User manual – 1 piece
- Rack ears – 1 pair
Product Usage Instructions:
1. Safety Reminder:
-
Before powering on the device, ensure that the device is
properly grounded to protect it and the operating personnel from
electrostatic discharge. -
Follow the installation, usage, and maintenance guidelines
provided in the user manual.
2. Equipment Connection:
Refer to the equipment connection diagram provided in the user
manual to connect the necessary cables and devices to the HDMI
matrix.
3. Equipment Operation:
The LCD display screen on the front panel will light up after
powering on the device. It shows the current operation status and
provides access to different interfaces.
-
Press the MENU button to cycle between VIEW, SWITCH, SCENE, and
SETUP interfaces. -
The default interface is VIEW.
4. Front Push-Button Control:
Use the front push buttons to control the device settings.
-
MENU > OUTPUT: Access the output settings.
-
MENU > OUTPUT > Output 1: Configure the video settings
for Output 1. -
MENU > OUTPUT > Output 1 > Control > Video: Setup
the output video options, including video ON/OFF, switch, and test
pattern. -
MENU > OUTPUT > Output 1 > Format: Configure the
output video format, resolution, and color space. Default options
include 4K@60Hz, 4K@30Hz, 1080P@60Hz, and 720P@60Hz.
Follow the above instructions to control and configure other
outputs as needed. Refer to the user manual for more detailed
instructions and additional features of the WolfPack 4K60 18Gbps
4X4 Seamless HDMI Matrix.
User Manual
WolfPack 4K60 18Gbps 4X4 Seamless HDMI Matrix with Video Wall
&Multiviewer&Scaling and APP&IR&IP&RS-232
HDTV444K60
Version: V23.3.24
1
Safety Reminder
To protect the device and operating personnel from electrostatic discharge,
you need to check and ensure that the device is grounding well before the
device is powered on. Please observe the following when you install, use,
maintain this equipment.
Make sure the device ground connection. Disposal Instruction (US) For better
protection of our earth, please don’t throw this electronic device into
municipal trash bin when discarding. To minimize pollution and ensure utmost
protection of the global environment, please recycle the product. For more
information about the collection and recycling of Waste Electrical and
Electronic Equipment (WEEE), please contact your local dealers. Safety
Instructions 1. Please read these safety instructions carefully. 2. Please
keep this User Manual for later reference. 3. Please disconnect this equipment
from connecter before cleaning. Don’t use liquid or prayed detergent for
cleaning. Use moisture sheet or cloth for cleaning. 4. Make sure the equipment
is connected to the power source with the correct voltage, frequency, and
ampere. 5. All cautions and warnings on the equipment should be noted. 6.
Never pour any liquid into opening, this could cause fire or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be
opened by qualified service personnel. 8. If one of the following situations
arises, get the equipment checked by a service personnel :
a. Liquid has penetrated into the equipment. b. The equipment has been exposed
to moisture. c. The equipment has not work well or you can not get it work
according to user’s manual. d. The equipment has dropped and damaged. e. If
the equipment has obvious sign of breakage. 9. Ambient operation temperature:
0 ~ 45 degrees. 10. Risk of overheating! Don’t put operating/installing
equipment inside too closed space, be sure the installation space at least 1
to 2 inches or 2 to 5 cm of space for ventilation. To ensure that other
objects do not cover the equipment. Notice: Peripheral devices Only
peripherals (input/output devices, terminals,player, etc.) certified to comply
with Class B limits may be attached to this equipment. Operation with non-
certified peripherals is likely to result in interference to radio and TV
reception. Caution Changes or modifications not expressly approved by the
manufacturer could void the user’s authority, which is granted by the Federal
Communications Commission, to operate this equipment.
2
Contents
1. Product Introduction ………………………………………………………………………………………. 4 2. Product
Features …………………………………………………………………………………………….4 3. Technical Datasheet
……………………………………………………………………………………….. 5 4. Packing Datials
……………………………………………………………………………………………… 5 5. Panel diagram
………………………………………………………………………………………………. 5 6. Product Connection Diagram
……………………………………………………………………………. 7 7. Product Operation and Instruction
…………………………………………………………………….. 6
7.1 Front Panel Switching Operation …………………………………………………………………….. 6 7.2 WEB
Control ………………………………………………………………………………………………..24 7.3 APP Control
…………………………………………………………………………………………………26 7.4 IR Remote Control
………………………………………………………………………………………….28 7.5 COM Control Commands
……………………………………………………………………………….. 29 8. Trouble Shooting and Attention
………………………………………………………………………..32 9. After Sales
…………………………………………………………………………………………………..32 9.1 Warranty
……………………………………………………………………………………………………… 32 9.2 limitation and Exception
……………………………………………………………………………….32
3
1. Product Introduction
This is advanced and powerful 4K60 18Gbps HDMI2.0 Matrix Switcher with 4 HDMI inputs and 4HDMI Outputs. This unit can support seamless switching, video wall, multi-viewer and Scaler functions. It can be controlled by the front push-button, IR remote, TCP/IP WEB GUI or APP control, also support the RS232 control. It also support 43.5MM audio inputs and 43.5mm audio outs or 4SPIF audio outs, it’s capable of producing high-quality imagery with pristine detailing and rich color, all HDMI ports on this unit are HDCP 2.2 compliant. This device also supports analog audio extraction, and audio channels can be switched independently.
2. Product Features
4HDMI2.0 with 43.5mm audio Inputs 4HDMI2.0 with 43.5mm audio and 4*SPDIF
Outputs. Seamless switching Supports Matrix switching, Video Wall and
multiview function Supports audio independently switching Compliant HDCP 2.2
with EDID management Control by front-panel push buttons, IR Remote, RS232,
TCP/IP and APP Resolution up to 4K@60Hz 4:4:4
3. Technical Datasheet
Name Resolution Input ports Output ports
4K60 18Gbps 4X4 Seamless HDMI Matrix with Video 4K@60Hz,YUV4:4:4 8 bit, 4K@30Hz/1080P/1080i/720P 4HDMI2.0 with 43.5mm 4HDMI2.0 with 43.5mm audio and 4*SPDIF
Transmission distance Bandwidth HDCP Compliant
10m/30ft for 4K60, 15m/45ft for 1080P@60Hz(by qualified 18Gbps HDCP 2.2 and HDCP 1.4
Controlling Power Consumption Dimension(mm)
Front-panel push buttons, IR Remote, RS232, TCP/IP and APP 22W(Max.) 486 * 279
- 44( mm)
Weight Operating
6Kg -5 to +40°C(23 to +104 °F)
TSetomrapgeeraTteumreperature -10 to +60°C(-14 to +140 °F)
4
4. Packing Details
Matrix switch ……………………………………………………………………………………….1 unit Power cord
……………………………………………………………………………………………..1 pcs User manual
……………………………………………………………………………………………1 pcs Rack ears
…………………………………………………………………………………………………1 pair
5. Panels
Front Panel
Name
LCD Screen
POWER IR OUTPUT INPUT
CONTROL
Description
Operation information real-time Display
light up after power on, it will light off after power off IR remote control
4 output buttons
4 input buttons
MODE
For the pre-built presets recall
MENU
For the main settings
UP
Up selection button
DOWN Down selection button
LOCK
Long-press to lock or unlock push buttons
ENTER
Enter button
Rear Panel:
Name
AUDIO IN INPUT AUDIO OUT OUTPUT SPDIF RS232 IR IN LAN DC 12V
Description
4 3.5mm Analog audio inputs 4 HDMI inputs 4 3.5mm Analog audio outputs 4
HDMI Outputs 4* SPDIF outputs 3-PIN RS232 control port For IR extension For
the WEB GUI, RS232, TCP/IP control DC 12V power supply
6. Equipment Connection Diagram
5
7. Equipment Operation and Instruction
The LCD display screen will light up after power and turned on. It shows the
current operation status, press MENU button, it will keep recycling between
VIEW, SWITCH, SCENE, SETUP four different interface. The default interface is
VIEW. 7.1 Front push-button control
7.1.1 MENU>OUTPUT
MENU>OUTPUT>Output 1
6
MENU>OUTPUT>Output 1>Control>Video to setup the output video, including video
ON/OFF, switch, test pattern
7
Format: to setup the output video format, resolution, color space
Default 1: 4K@60 Default 2: 4K@30 Default 3: 1080P@60hz Default 4: 720P@60hz
8
Coord: to crop the output image
It will including Crop, Zoom, Offset and Gap. Crop and Zoom image cropping or
zooming Crop start from: CropX0=0, CropY0=0; Crop ends with: CropY1=6000,
CropX1=6000.
9
Zoom start from: ZoomX0=0, ZoomY0=0; Zoom ends with: Offset and Gap are for the video wall bezel corrections Offset: Offeset U=0, Offeset D=0, Offeset L=0, Offeset R=0 Gap: GapX=0, GapY=0
ZoomX1=6000, ZoomY1=6000
PIP: when output is multiview to adjust the layer
Wall: to set up video wall mode
10
Rotate: only for OUTPUT1 with any degrees rotation Image: for output image
hue, brightness settings MENU>OUTPUT>Output 1>Audio
11
HDMI Onoff: HDMI Audo ON/OFF HDMI SRC: switch to different audio inputs DEC
Onoff: De-embedded audio ON/OFF DEC SRC: De-embedded audio switching
12
MENU>OUTPUT>Output 1>Power For the HDMI 5V ON/OFF
7.1.1 MENU>INPUT
MENU>INPUT>Input
13
MENU>INPUT>EDID
14
7.1.3 MENU>SETUP MENU>SETUP>Network
15
MENU>SETUP>RS232
MENU>SETUP>LCD
16
MENU>SETUP>OSD MENU>SETUP>Menu
Timer for Menu to back the channel time
17
Disable means need to press Enter or OK to take action Enable means need need
to press Enter or OK to run MENU>SETUP>User EDID
MENU>SETUP>System
18
Timed off for set a time to off the matrix, default with endlessness Timed on
for set a time to start the matrix, default with endlessness Auto sleep means
for auto sleep MENU>SETUP>System
7.1.4 MENU>Preset
19
20
*Demo for the saved presets to cycling
7.1.5 MENU>Info
21
MENU>Info>input MENU>Info>output
22
MENU>Info>System
23
7.2 WEB Control The default IP address are 192.168.1.200, Accordingly to
connected LAN port, enter the corresponding IP address, (Recommend with Google
Chrome) as below:
Note: The default user name and password is the same: admin, click login after
entering. Please make sure the control PC is at the same IP segment.
7.2.1 Fast setting Mainly for the Matrix Switcher
Preset: For the 8 multiviewer presets recalling
24
Status: To show the current input and output info
7.2.2 Basic setting Output rename pattern, video, audio, inputs, audio source
and output resolution settings
Analog Audio switching: Input rename, parrent, video and audio ON/OFF, EDID
Double click the Rename Rows to rename
25
Preset selection, rename, save, recall and clear, up to 23 presets 7.2.3
Advanced setting
7.2.4 System setting
7.3 APP Control The matrix switchers also can support the iOS and Android APP
control, users can search the keyword “Matrix Control System” in Apple store
or the Google Play Store.
26
Step 1: Make sure the matrix well connected with the WIFI router, and the
iPad/Android devices are connected to this same WIFI. Then open on the
MCS(matrix control system) APP and Enter the IP address of the matrix
switcher(the default IP addresses 192.168.1.200):
Step 2: After Enter the IP address, it will need to login, the default user
name and password both are the admin, After log in successfully, users can do
the same functions as the WEB GUI operation:
27
7.4 IR Remote Control
7.5 COM and TCP/IP Control Commands
RS232 cable with straight-through connection(USB-RS232 can be used directly to control)
Communication protocol:
Baud rate: 115200
Data bit: 8
Stop bit: 1
Check bit: None
The TCP port is 5000 and UDP is 4000
Commands
Explanation
Function description
YAll.
Y=1,2,3,4……
Switch Input Y to all the outputs Eg. “1ALL.” means switch input 1 to all outputs
All1.
One to one
Switch all the channels to be one to one. Eg.1->1 2->23->3……
YXZ.
Y=1,2,3,4…… Z=1,2,3,4……
Switch Input Y to Output Z Eg. “1X2.” means switch Input 1 to output 2
YXZ&Q&W.
Y=1,2,3,4…… Z=1,2,3,4…… Q=1,2,3,4…… W=1,2,3,4……
Switch Input Y to Output Z, Q, W Eg. “1X2&3&4.” means switch Input 1 to Output 2, 3, 4
SaveY.
Y=1,2,3,4……
Save current status to scene Y Eg. “Save2.” means saving current status to Scene 2
RecallY.
Y=1,2,3,4……
Recall the saved scene Y Eg. “Recall2.” means recall the saved Scene 2
Y?.
Y=1,2,3,4…….
Check the Input Y to outputs switching status
Eg. “1?.” means to check Input 1 switching status
28
Note: Every command ends with a period “.” and it can’t be missing. The letter
can be capital or small letter. Switch success will return as “OK”, and failed
will return as “ERR”.’ Multiview modes: M-2×2
M-3×1 L
Video Wall W-2×2
29
W-1×2 1×2
W-1×3 30
W-1×4
How to crop and zoom:
Way 1: By the front push button/IR remote with the OSD: MAIN->Output->Output
1->Video->Coord Adjust Crop and Zoom Crop X0->0 Crop Y0->0 Crop X1->3000 Crop
Y1->0 Zoom X0->500 Zoom Y0->800 Zoom X1->2500 Zoom Y1->4500
31
Way2: By the WEB GUI control
8. Trouble Shooting and Attention
No signal on the display? Make sure all the power code well connected Check
the display switcher and make sure it’s in good condition Make sure the cables
between the device and display are short than 10 meters for 4K Reconnect the
cables and restart the system Make sure the signal sources are on Check the
cables between the devices and displays are connected correctly. Make sure the
display can support the output resolution.
9. After Sales
9.1 Warranty Information The Company warrants that the process and materials
of the product are not defective under normal use and service for 2 (2) year
following the date of purchase from the Company or its authorized
distributors. If the product does not work within the guaranteed warranty
period, the company will choose and pay for the repair of the defective
product or component, the delivery of the equivalent product or component to
the user for replacement of the defective item, or refund the payment which
users have made. The replaced product will become the property of the Company.
The replacement product could be new or repaired. Whichever is longer, any
replacement or repaired of the product or component is for a period of ninety
(90) days or the remaining period of the initial warranty. The Company shall
not be responsible for any software, firmware, information, or memory data
contained in, stored in, or integrated with the product repaired by the
customer’s return, whether or not during the warranty period.
9.2 Warranty limitations and exceptions Except above limited warranty, if the
product is damaged by over usage, incorrectly use, ignore, accident, unusual
physical pressure or voltage, unauthorized modification, alteration or
services rendered by someone other than the Company or its authorized agent,
the company will not have to bear additional obligations. Except using the
product properly in the proper application or normal usage
32
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>