WolfPack 4K 30 Hz HDMI Over Fiber Extender User Manual
- October 30, 2023
- WOLFPACK
Table of Contents
WolfPack 4K 30 Hz HDMI Over Fiber Extender
Introduction
HDTV-FIBER-HD103T optical extension module consists of transmitter module and
receiver module, each of which has a LC connectors and a HDMI plug. Users
could decide extension length at their ciiscretion by choosing the length of
fibre-optic cables with LC: ferrules at the ends. It offers graphic TMDS
signals to be extensible up to the limits of modal bandwidth of selected OM3
multi-mode glass fibers or Single-Mode fibers.
The communication betwee.11 the HDTV-FIBER-HD103Tand HDTV-FIBER-HD103R is
bidirectional, the data rate from the – Tto – R is 10.2Gb/s with 1310nm, and
from the – R to – Tis 250Mb/s
With1550nm, the 1310nm and 1550nm optical signals are multiplexed to one fiber
With a Hl0/1550nm WDM filter insider the HDMI extender.
The HDTV·FIBER-HD103T HDMI Extender compliant HDMI 1.4 standard, It Support
resolution is up to 38402016/30Hz (YUV 4:4:4) or 38402016/60Hz (YUV 4:2:0).
It support distance up to 300m over OM3 MMF and SMF.
Features
- Resolution up to 3840*2160/30Hz(Y;U)V 4:4:4);
- Support resolution 3840*2160/30Hz(Y:U:V 4:2:0)
- Extend the DVI data up to 300 meters over OM3 MMF or SMF Fiber;
- Support HDCP;
- Detachable feature with 1x LC OM3 MM Fiber or SM Fiber;
- Includes two (2) +sv DC power adapters for the transmitter and receiver ;
- Micro USB-B power connector;
- Data security with negligible RFI/EMI emissrons and loss of video quality due to .no copper conductor present.
Specification
| Parameter| Specifications
---|---|---
Resolution| 4k2k 30Hz| 3840×2160/30Hz (YUV 4:4:4)
4k2k 60Hz| 3840×2160/60Hz.(YUV 4:2:0)
Components| Laser Diodes in Tx Module| 1310nm FP laser and 1550nm PIN PD
Photo Diodes in Rx Module| 1550nm FP laser and 1310nm PIN PD
WDM filter| Integrated 1310nm/1550nm filter
Electrical| Input and Output Signals| TMDS Level (complying with DVI1.0)
Data Transfer Rate (Graphic Data)| Max. 3.4Gbps
Maximum Pixel Clock Frequency| 340Mb/s
Maximum Video Bit Rate| 10.3Gb/s
Total Jitter at the end of Rx output| Max. 309 ps
Skew inter-channels| Max. 6ns
Optical| Link Power Budget| Min 8.5dB
Mechanical| Module dimension (mm)| 59.5LX20.0WX10.5H
Connector| Optical Connector| 1X LC connector
Fiber connector| OM3 MM Fiber or Single-mode Fiber
Packing
| FIBER-HD-110-R(Receiver) | 1 | pcs |
|---|---|---|
| FIBER-HD-110-T(Transmitter) | 1 | pcs |
| USB power cable/power adapter(DC 5V) | 2 | pcs |
Product Connection Diagram and drawing:
Operation
Transmitter: HDTV-FIBER-HD103T
| Parameter| Symbol| Minimum| Typical| Maximum|
Units
---|---|---|---|---|---|---
Power Supply| Supply Voltage| Vcc| 4.5| 5.0| 5.5| V
Supply Current| ITcc| –| 280| 320| mA
Power Dissipation| PRX| –| 1.4| 1.76| W
Power Supply Rejection| PSR| | 50| | mVp-p
TMDS| Data Input Load| RLD| | 50| | Ω
---|---|---|---|---|---|---
Graphic Supply Voltage| GVCC| + 3.1| + 3.3| + 3.5| V
Single-Ended Output
Swing Voltage
|
GVISWING
|
0.4
|
–
|
0.8
|
V
Optical Link| 10.2Gb/s transmitter
Optical output Power| Po| -6.0| | 0| dBm
Data Rate| B| | 10.3| | Gb/s
Receiving Wavelength| λ| 1260| 1310| 1360| nm
ER| Er| 3.5| | 7| dBm
Δλ| | | | 2| nm
250Mb/s Receiver
Receiving Optical Power| Po| -25| | 0| dBm
Data Rate| B| | 250| | Mb/s
Receiving Wavelength| λ| 1490| 1550| 1610| nm
Signal Detect Good| SDg| | | -25| dBm
Signal Detect Fail| SDf| -27| | | dBm
Link Power Budget| Pbgt| 9.0| | | dB
Total Jitter| TRjitter| | | 309| ps
Receiver: HDTV-FIBER-HD103R
| Parameter| Symbol| Minimum| Typical| Maximum|
Units
---|---|---|---|---|---|---
Power Supply| Supply Voltage| Vcc| 4.5| 5.0| 5.5| V
Supply Current| IRcc| –| 280| 320| mA
Power Dissipation| PRX| –| 1.4| 1.76| W
Power Supply Rejection| PSR| | 50| | mVp-p
TMDS| Data Output Load| RLD| | 50| | Ω
Graphic Supply Voltage| GVCC| + 3.1| + 3.3| + 3.5| V
Single-Ended Output
Swing Voltage
|
GVISWING
|
0.4
|
–
|
0.8
|
V
Optical Link| 10.2Gb/s Receiver
Receiving Optical Power| Po| -14.5| | 0| dBm
Data Rate| B| | 10.3| | Gb/s
Receiving Wavelength| λ| 1260| 1310| 1360| nm
Signal Detect Good| SDg| | | -14| dBm
Signal Detect Fail| SDf| -15| | | dBm
Link Power Budget| Pbgt| 8.5| | | dB
Total Jitter| TRjitter| | | 309| ps
250Mb/s Transmitter
| Optical output Power| Po| -9.0| | -3| dBm
Data Rate| B| | 250| | Mb/s
Receiving Wavelength| λ| 1490| 1550| 1610| nm
ER| Er| 9| | | dBm
Recommended Specifications-of Fibre-Optic Cables
| Parameters | Conditions | Specifications |
|---|---|---|
| Fiber Type | OM3 MM Fiber or SM Fiber |
Fiber Cable Attenuation
| SM Fiber λ = 1310nm| Max. 0.5dB/km
OM3 MM Fiber λ = 1310nm| Max. 3.5dB/km
Extension Distance
| SM Fiber| 300m
OM3 MM Fiber| 300 m
Skew| | Max. 0.4ns
Insertion Attenuation| | Max. 0.5dB
Total Optical Attenuation| In 330 ft (100 meter) extension| Max. 1.5dB
**Note*** : some plastic couplers to clamp two LC connectors could not fit in.