WOLFPACK HDTV MX0016M1 8K 4×2 HDMI Matrix Switch User Manual
- June 4, 2024
- WOLFPACK
Table of Contents
HDTV MX0016M1 8K 4×2 HDMI Matrix Switch
User Manual
WolfPack 8K 4×2 HDMI Matrix Switch
MODEL No. HDTVHDMX0016M1Includes separate audio HDTVHDMX0017M1No audio
WolfPack 8K 4×2 MATRIX FEATURES:
HDTVHDMX0016M1Includes audio)
Picture1.0Front Panel
No.
Description
Introduction
Mini USB port
Only for factory upgrade
HDMI input indicators for
channel A
The selected input channel indicator will light up.
HDMI output
indicator for channel A
Lit when HDMI OUT A has signal output.
HDMI input
indicators for channel B
The selected input channel indicator will light up.
HDMI output
indicator for channel B
Lit when HDMI OUT B has signal output.
ARC status indicator
Lit when ARC on.
IR receiving window Receive the commands sent by the infrared remote control.
EDID mode indicators
Include three audio EDID modes: PASS/2CH/5.1CH
Audio source channel indicator
Lit when Audio output is to HDMI OUT A. Light is off is to HDMI OUT B.
Input selection key of channel A
Loop to select the input channel of HDMI OUT A
Input selection key of channel B
Loop to select the input channel of HDMI OUT B
ARC on/off key
HDMI ARC (Audio return channel) function on/off.
EDID
mode
selection key
Supports three audio EDID mode switching: PASS/2CH/5.1CH.
Power status indicator
Lit when power on.
Power switch
Power self – lock switch, turn on when pressed, turn off when pressed.
No.
Description
Power jack
HDMI output port B
HDMI output port A
HDMI input port 4
HDMI input port 3
HDMI input port 2
HDMI input port 1
Analog audio ports
Digital audio port
Picture 1.1 Rear Panel
Introduction
Requires 6-12V power supply
Connects to monitor with HDMI port. This port also supports ARC.
Connects to monitor with HDMI port
Connects to your source device by WolfPack 8K HDMI cable. Connects to your source device by WolfPack 8K HDMI cable. Connects to your source device by WolfPack 8K HDMI cable. Connects to your source device by WolfPack 8K HDMI cable. Synchronized output stereo analog audio which contains left and right channels. Synchronized output digital audio by fiber optic.
HDTVHDMX0017M1No audio
No.
Description
Mini USB port
HDMI input
indicators for
channel A
Picture 1.2 Front Panel
Introduction
Only for factory upgrade
The selected input channel indicator will light up.
HDMI output indicator for
channel A
Lit when HDMI OUTA has signal output.
HDMI input indicators for
channel B
The selected input channel indicator will light up.
HDMI output indicator for
channel B
Lit when HDMI OUT B has signal output.
IR receiving window Receive the commands sent by the infrared remote control.
Input selection key of channel A
Loop to select the input channel of HDMI OUT A
Input selection key of channel B
Loop to select the input channel of HDMI OUT B
Power status indicator
Lit when power on.
Power switch
Power self – lock switch, turn on when pressed, turn off when pressed.
Picture 1.3 rear panel showing
No.
Description
Introduction
Power jack
Requires 6-12V power supply
HDMI output port Connects to monitor with HDMI port. This port also supports
B
ARC.
HDMI output port A
Connects to monitor with HDMI port
HDMI input port 4 Connects to your source device by WolfPack 8K HDMI cable.
HDMI input port 3 Connects to your source device by WolfPack 8K HDMI cable. HDMI input port 2 Connects to your source device by WolfPack 8K HDMI cable. HDMI input port 1 Connects to your source device by WolfPack 8K HDMI cable.
Picture 1.4 IR panel showing and function introduction
Remote keys
A-B ARC PASS 2CH 5.1CH
Panel keys
Functional description
/ Press AUDIO
key more than 3 seconds
Press ARC key
Press AUDIO key
Power standby on/off button
Select A/B for the audio output source channel
ARC turn on / turn off
Audio EDID PASS mode. The audio output format is determined by the EDID
information of the TV. Audio EDID 2CH mode. Priority output stereo audio in
this mode. Audio EDID 5.1CH mode. Priority output 5.1 channel bit stream in
this mode. The analog output ports
1/2/3/4 D/W
ON/OFF
Press A/B key
Press A/B key more than 3
seconds
/
have no output now.
Input source selection of A/B output channel. HDMI1.4 compatibility mode turn
on/off Try to turn on this mode when there is a problem using both HDMI1.4
signal source and HDMI2.0 TV. When turned on, the 5 LEDs in group A/B will
flash 4 times at the same time, and flash twice when turned off HDMI A/B
output port enabled or disabled
- Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do not use the remote for long time.
WolfPack 8K 4×2 HDMI Matrix Switch Connection and Operation:
H DTVH DM X0 0 1 6M 1 /H DTVH DM X0 0 1 7M 1
NOTE:
1. Please use 8K HDMI cables and connect the cables before powering the
equipment. 2. In the matrix mode (In this mode, the outputs of A and B are
different), output ports A and B cannot output 8K signals at the same time.
Only one group is allowed to output 8K and the other group output 4K or less.
3. The product has power off memory function. The setting state of the output
channel is recorded and saved. After the power is off, the saved data will be
automatically retrieved for configuration. 4. The optional AUDIO OUT is a set
of multiplexed ports that allows you to select HDMI
OUT A & B sounds by using the “A-B” key.
The Audio EDID mode selection is also available for multiplexing. When the audio
source selects channel A, the audio EDID mode is valid for channel A. When the audio
source selects channel B, the audio EDID mode is valid for channel B.
Analog audio can only be outputted when the audio format is LPCM, so choose the
EDID mode in 2CH mode when using the analog audio output.
If you want to use ARC or CEC, you must connect the TV to the OUTA port. Before
using ARC, make sure your TV HDMI port supports ARC and the ARC have been turned on.
WolfPack 8K 4×2 HDMI MATRIX SWITCH SPECIFICATIONS:
Model No. Model name Input ports Output ports
Video format
Deep color
Audio format Transmission bandwidth Transmission rate IR distance
HDTVHDMX0016M1 (Includes separate audio) HDTVHDMX0017M1 (No separate audio)
8K HDR 4×2 HDMI True Matrix Switch
4HDMI 2HDMI RCAX2, Optical X1 (Only for HDTVHDMX0016M1)
480p/720p/1080p/2160p@24/25/30/50/60/100/120Hz Up to 4320p@50/60Hz. Supports
HDR & Dolby Vision 8/10/12/16Bit@2160p 8/10bit@4320p
Dolby HD/DTS HD/Dolby Atmos/Dolby AC3/DTS/LPCM Etc.
1200MHz Max. 48Gbps Max. 5m
Input cable length
2160P/AWG 26 5m1080P/AWG 26 10m
Output cable length
2160P/AWG 26 5m1080P/AWG 26 12m
Power adapter specification Max working current Working temperature range
Input: AC 100~240V Output: DC 12V/1.5A 500mA
-5 ~ +40
Working humidity range 5 to 85%RHNo Condensation
Storage temperature Storage humidity Size Weight
-15 to 55 5 ~95%RH (No Condensation) 250x75x30 (mm) 440g
Accessories
Manual, Remote, Power Adaptor
YOUR NOTES:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>