Ciro G0058110 Goldstrike Drink Holder Instruction Manual

: June 13, 2024
: Ciro

Table of Contents

Parts Included:
Installation Instructions:
Documents / Resources

GOLDSTRIKETm DRJnK HOLDER

Parts Included:

1 AccessoryPerch Mount
2 M6x45mm Bolts
2 Spacers

Installation Instructions:

Removethe plastic bolt cover on your controls using your fingernail or screwdriver. (Fig. 1)
Removethe top 6mm bolt. (Fig. 2)
Put the included MG bolt through the top hole of the perch mount, then slide the spacer over it. (Fig. 3)
Install the perch mount where you removed the stock bolt using a 5mm alien. Leave loose at this time. (Fig. 4)
Removethe lower stock control bolt and install the included MG bolt and spacer. You may now tighten both the upper and lower bolts. (Fig. 5)
Adjust the angle of the ball mount to your desired position and tighten the 4mm bolt. (Fig. 6)

DO NOT OVERTIGHTEN
WARNING:
This indication alerts you to the fact that ignoring the contents describedhereincan result in potentialseriousinjury or death if not followed.
CAUTION:
This indication alerts you to the fact that ignoring the contents describedhereincan or will result in material damage and/or personal injury.
ATTENTION:
This indication alerts you to the fact if you ignore this detail you will affect the performance or functionalityof the product. All Ciro products are designed for “easy assembly” and/or “plug and play”. We recom menda competent mechanic install our products, using standardmechanical proceduresto assure a safe and successfulinstallation.
NOTE:
Ciro products are designed and manufactured under very strict quality control. Ciro warrantsthat products sold to the original purchaser shall be free from any defects in materials and workman- ship for a period of 3 (three) years from the date of purchase,and a lifetime warranty against LEDfailure. Ciro will have no obligation if the customer cannotshow proof of purchase. Warrantywill not be granted unlessthe part is properly installedand maintained. Ciro will not be liable for any 1 ‘i, consequentialand incidental , ‘ damages,including labor, or I non-Ciroproducts. l 6 Pleasevisit our website Ciro3d.comfor our complete warranty policy.

PartsIncluded:
1 Drink Holder Assembly
InstallationInstructions:

Removethe large plastic nut from your drink holder and slide it over the ball mount with the threads facing outward.
Snapyour drink holder onto the ball and thread the large plastic nut back onto the drink holder. Adjust the angle, tighten it down, and you are ready to go.

WARNING:
This indication alerts you to the fact that ignoring the contents describedhereincan result in potential serious injury or death if not followed.
CAUTION:
This indication alerts you to the fact that ignoring the contents describedhereincan or will result in material damage and/or personal injury.
ATTENTION:
This indication alerts you to the fact if you ignore this detail you will affect the performance or functionalityof the product. All Ciro products are designed for “easy assembly” and/or “plug and play”. We recom mend a competent mechanic install our products, using standardmechanical proceduresto assure a safe and successfulinstallation.
NOTE:
Ciro products are designed and manufactured under very strict quality control. Ciro warrantsthat products sold to the original purchaser shall be free from any defects in materials and workman ship for a period of 3 (three) years from the date of purchase,and a lifetime warranty against LED failure. Ciro will have no obligation if the customer cannotshow proof of purchase. ,, Warrantywill not be granted unlessthe part is properly installed and maintained. , , Ciro will not be liable for any ‘i consequentialand incidental ~ damages,including labor, or )1non-Ciroproducts. ” Pleasevisit our website ~ Ciro3d.com for our complete warranty policy.

CIRO3D.COM

Documents / Resources

| Ciro G0058110 Goldstrike Drink Holder [pdf] Instruction Manual
G0058110 Goldstrike Drink Holder, G0058110, Goldstrike Drink Holder, Drink Holder, Holder
---|---