Kendal Lighting PF328-1L-BLK CIRCOLS 1 Light LED Ring Pendant Instruction Manual
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
INSTRUCTIONS PF328-1L-BLK/BRS
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items: A.Screws
B.Mounting plate
C.Fixture
Parts bag
- Wire nuts 3PCS
- Screw anchors. 2PCS
Attach the mounting plate to junction box with screws provided. Before
installation to ceiling,adjust fixtures to desired length by pushing wire up
into canopy,then coiling up excess wire, minor adjustment can be made after
installation.To lower or lengthen wire,loosen the screw where wire comes out
of canopy. Connect the GROUND WIRE from junction box to GROUND (or GREEN) with
a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire
from fixture with a wire nut.Connect the LINE WIRE from junction box to LINE
(BLACK) wire from fixture with a wire nut. Attach the fixture to the mounting
plate with screws provided. Due to the light weight aluminium material, It may
be necessary to make small adjustments in order to get the individual lights
to hang straight. This can be done by making small adjustment turns to the
wire where it goes into the canopy. This fixture is designed to dim with a
standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended dimmers:
Lutron DVCL-153P
Lutron CTCL-153P
Lutron SCL-153P
Or other compatible LED dimmer controls Wattage should not exceed 150 watts of
product for a 600 watt dimmer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>