KENDAL LIGHTING PF328-3LBR-BLK BRS Circols 3 Light LED Pendant Bar Instructions
- June 13, 2024
- KENDAL LIGHTING
Table of Contents
INSTRUCTIONS
PF328-3LBR-
BLK/BRS
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
A.Screws
B.Mounting plate
C.Fixture Parts bag
1.Screws 4PCS
2.Wire nuts 3PCS
3.Screw anchors. 2PCS
Attach the mounting plate to junction box with screws
provided. Before installation to ceiling,adjust fixtures to desired length by
pushing wire up into canopy,then coiling up excess wire, minor adjustment can
be made after installation.To lower or lengthen wire,loosen the screw where
wire comes out of canopy.
Connect the GROUND WIRE from junction box to GROUND (or GREEN)
with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE)
wire from fixture with a wire nut.Connect the LINE WIRE from junction box to
LINE (BLACK) wire from fixture with a wire nut.
Attach the fixture to the mounting
plate with screws provided.
Due to the light weight aluminium material, It
may be necessary to make small adjustments in order to get the individual
lights to hang straight. This can be done by making small adjustment turns to
the wire where it goes into the canopy.
This fixture is designed to dim with a
standard Triac forward phase dimmer. Dimming levels will vary by dimmer.
Recommended dimmers:
Lutron DVCL-153P
Lutron CTCL-153P
Lutron SCL-153P
Or other compatible LED dimmer controls Wattage should not exceed 150 watts of
product for a 600 watt dimmer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>