Skydance CV1 RF+Sensor Synchronous DIM 6 CH LED Control Box Instruction Manual

Skydance CV1 RF+Sensor Synchronous DIM 6 CH LED Control Box

Features

• Dimming interface: RF Wireless, Sensor
• Match with RF 2.4G single zone or multiple zone dimming remote control
• Match with a variety of induction sensor head
• 12VDC Input
• 6 channel synchronous constant voltage output, Max. total output power 60W
• Ultra-thin design, light weight and high ef
• Light on/off fade time 3s selectable
• Suitable for indoor LED lighting application
• 5 Year, 50,000hr warranty

Applications

• Suitable for cabinet LED strip.

Mechanical Structures and Installations

Wiring Diagram

1. Use alone, powered by switching power supply
   
   

2. Matching hutch ark LED driver use
   

Available sensor head

Model and Product name

| Features| Product pictrue| Size|

Sensor data

---|---|---|---|---
ER
PIR Motion Sensor| When people or objects
light turn on; when these
light turn off after 30 seconds.| | | ≤3m Sensitivity angle: 120
EW
Wood Touch Sensor| The medium can be wood, glass or plastic.
Short touch the sensing area to turn on or turn off light; long touch the sensing area to dimming up or down.| | | Dimming range: 0 -100% PWM Frequency: 2KHz Detective distance: ≤5cm
EC
Touch Sensor| Short touch the LED to turn on or turn off light; long touch the LED to dimming up or down.| | | Dimming range: 0 -100% PWM Frequency: 128Hz
ED ED(C)
Door Sensor| When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually.| | | Detective distance: ≤10cm Detevtive angle: 15-30
EB EB(C)
Hand Sweep Sensor| When hand sweep, the light turn on gradually; when hand sweep again, the light turn off gradually.|

| | Detective distance: ≤8cm
Detevtive angle: 15-30
EM
Microwave motion Sensor| Turns on the light upon detection of motion, and turns off after a pre-selected hold time when there is no movement.| | | Detection zone: Max.(DxH) 20 x 15m Detection angle: 150°(wall installation), 360°(ceilling installation) Hold time: 10s/30s/90s/3min/ 10min/20min/30min

Light on/off fade time

Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times.
Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Match Remote Control

The control box can match with RF 2.4G dimming remote control optional, except PIR motion sensor input.
For PIR motion sensor input, please long press the MATCH key 10s to disable the RF remote match function. For other sensor input, please long press the Match key 5s to enable the RF remote match function. The user can choose the suitable match/delete ways. Two options are offered for selection:

Use Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.

Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Installation precautions

Please do not stack the products.
The distance between two products should be ≥0.5m, so as not to affect heat dissipation and lifespan of the products.

Dimming Curve

Failure analysis and troubleshooting

1. no power
2. Wrong wiring

|

1. Check the power supply
2. Connection test

Remote control nonresponse|

1. run out of battery
2. Beyond remote control range
3. No matching

|

1. Replace the battery
2. Move the remote to controller closer
3. Match the remote to LED driver

Hiccup flaming| Overload| Check the power of the light
Controlled by other remote| Wrong pairing| Delete all pairing and pair with remote again
Multiple LED drivers are out of sync| Inconsistent fade on/off time| Set the same fade on/off time

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>