CyberPower B615 6 Outlet Surge Protector User Manual

: June 13, 2024
: CyberPower

Table of Contents

CyberPower B615 6 Outlet Surge Protector
Product Information
Product Usage Instructions
Troubleshooting
6-OUTLET SURGE PROTECTOR
FEATURES
SPECIFICATIONS
TROUBLESHOOTING
TECHNICAL SUPPORT
CONFORMANCE APPROVALS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CyberPower B615 6 Outlet Surge Protector

Product Information

The Cyber Power Systems 6-Outlet Surge Protector, model B615, is designed to protect your electronic equipment from power surges and spikes. It features six standard grounded outlets, a 15-ft power cord, an on/off switch circuit breaker, and a protected LED indicator. The surge protector has a surge protection rating of 1500 Joules and an electrical rating of 125V / 15A / 60Hz / 1875W continuous duty. It also comes with keyhole mounting slots on the back for easy installation.

Product Usage Instructions

Plug the surge protector into a standard grounded wall outlet by fully inserting the plug. Ensure that there are no exposed conductors.
Before plugging electronic equipment into the surge protector outlets, make sure they are turned off.
Do not use other surge protectors or power strips to connect equipment to this surge protector.

Troubleshooting

If the protected LED indicator does not light up, it means that the surge protector’s AC lines are no longer protected from surges.
This could be due to a power surge or spike that exceeded the specified limits and overloaded the protection circuitry. Although the surge protector has protected your connected equipment as designed, it will no longer provide protection against future surges and spikes. In such cases, the surge protector should be replaced.

Caution:
This product contains chemicals including bisphenol A (BPA) and styrene (ABS), which are known to the State of California to cause reproductive harm and cancer. For more information, please visit www.P65Warnings.ca.gov.

Conformance Approvals:
This surge protector complies with Part 15 of the FCC Rules. It has been tested and found to comply with the limits for a Class B digital device. Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.

6-OUTLET SURGE PROTECTOR

SURGE PROTECTOR INSTRUCTIONS

Plug the surge protector into a standard grounded wall outlet by fully inserting the plug and ensure that there are no exposed conductors.
Make sure electronic equipment is turned off before plugging into the surge protector outlets.
Do not use surge protectors or power strips to connect equipment to this surge protector.

FEATURES

On/Off Switch Circuit Breaker
Protected LED Indicator
Standard Grounded Outlets (6)
15-ft Power Cord
Keyhole Mounting Slots (back of unit)

SPECIFICATIONS

Model Number: Outlets:
Surge Protection: Electrical Rating:
Circuit Breaker:
- B615 Standard Grounded Outlets (6) 1500 Joules 125 V / 15 A / 60 Hz / 1875 W
- Continuous Duty 15 Amp

WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov..

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire between the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

If the protected indicator does not light, the surge protector’s AC lines are no longer protected from surge. The surge protector may have received a power surge or spike beyond its speciﬁed limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges and spikes. It should be replaced.

FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding:

Product information and certiﬁcations
Product warranty
Connected equipment guarantee

TECHNICAL SUPPORT

Visit: CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
Hours of Operation: Monday – Friday: 7:00am – 6:00pm CST
© 2023 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 CyberPowerSystems.com