UMIDIGI G3 Smartphone User Manual

June 13, 2024
Umidigi

UMIDIGI logo

UMIDIGI G3 Smartphone

UMIDIGI G3 Smartphone

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

UMIDIGI G3 Smartphone 1

UMIDIGI G3 Smartphone 2

Power button : Long press the power button to turn on the device. When the device is on, short press the power button to turn the screen on and off.
Volume button : Short press the volume button to adjust the volume or to mute incoming calls.

Card Management

When the phone is on, it is not recommended to pull out the card tray. Only pull out the card tray when the phone is off.

SIM Card Insertion
Face the chip side of the Nano SIM card down when inserting the card into the slot. Be aware of the direction of the cut edge when placing the Nano SIM card into the slot.
Reminder: Please use standard Nano SIM card. Don’t use a non-standard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and card-rejection situation that may cause damage to the phone.

UMIDIGI G3 Smartphone 3

Memory Card Insertion
Please place the metal contact of the memory card down, be aware of the direction of the cut edge. Place the card onto the tray and insert it into the device.
Reminder: Please turn off the phone before changing or replacing the memory card. Memory card does not come with the phone, please purchase it separately.

Dual SIM Management
Please choose which SIM card slot is to be the main one for 4G network via Settings > SIM Card. Choose your preferred network types of 4G/3G/2G via Settings > Network & Internet > Mobile Network > Preferred Network Type.

Operation Description

Fingerprint Identification
You can unlock the screen by fingerprint ID function. Click on Settings > Security & Location > Fingerprint and enter your fingerprint information by following the on-screen instructions.

Reminder: Please ensure your finger is clean and dry when giving your fingerprint information to the phone. Please enter the information of your finger pulp for fingerprint information. When unlocking the phone by fingerprint, please place your finger pulp on the touch ID sensor for about a second.

Network Connection

WLAN Connection
Enter the WLAN settings via Settings > Network & Internet > Wi-Fi. When WLAN is on, a list of available Wi-Fi connections will appear. Click on the one you want to connect to, enter the password if the network is encrypted, then click on Connect. When it’s a public network, simply click on Connect and when it shows “connected” next to the network, it means you can access the local network and/or the internet.

Bluetooth Connection
Enter the Bluetooth settings via Settings > Connected Devices > Bluetooth. Enable the Bluetooth function by clicking the menu button and selecting “refresh”, then the phone will search for available Bluetooth devices for pairing and list them on the screen. Click on the one you want to pair with, then click on “Pair” on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.
Reminder: Slide down the status bar twice to open the shortcut switches for Bluetooth and other functions.

WLAN Hotspot Settings
Enter the Hotspot settings via Settings > Network & Internet > Hotspot & Tethering > Wi-Fi Hotspot to turn on the portable WLAN hotspot function. When setting up the WLAN hotspot, enter your username in the “Network Name” and password, then click “Save”. Another device can use the WLAN hotspot by searching for the network and entering the password. As hotspots are usually used for your friends and acquaintances to access the internet, it is recommended to use a password that you don’t use for your private accounts.
Reminder: Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hotspot depends on the signal strength and devices connected.

Camera
Aim the camera at the object you want to take a photo of, the phone will start to focus it automatically. Alternatively, you can click on the screen to choose an object you wish to focus on. Then click the capture icon to take the photo. You can also choose other modes, such as video recording, beautifying, or panorama.

Dual-Card Standby
“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but they cannot make a phone call at the same time. During the standby mode, both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.

Security Information
Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. Umidigi holds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly.
Please prevent using the device in extremely cold/hot conditions. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by Umidigi. Incompatible battery and recharger may cause damage to the phone. Please abide by local regulation when disposing of the used batteries and phones.
Please do not place the battery or the phone onto or inside heating devices such as microwave, oven, or radiator. The battery may explode if it gets too hot.
Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside. It may cause internal short-circuit and overheating.

Specifications

Basic Information

  • Model G3

  • Operating System Android™ 13

  • CPU MediaTek Helio A22 Quad-Core
    4× ARM Cortex-A53 Mpcore up to 2.0GHz

  • GPU IMG PowerVR GE8300 up to 660 MHz

  • RAM 4GB

  • ROM 64GB

  • Battery 5150mAh

  • Touch ID Side-placed fingerprint sensor

Display

  • Screen Size 6.52 inch (16.56 cm)
  • Resolution 1600×720 pixels
  • Touch Capacitive multi-touch

Cameras

  • Rear Camera 13Mpx + 2Mpx
  • Front Camera 5Mpx

Connection (I/O)

  • Bandwidth
    4G: LTE FDD: B1/2/3/4/5/7/8/12/1720/28A/28B/66
    LTE TDD: B38/40/41
    3G: WCDMA: B1/2/4/5/8
    2G: GSM: B2/3/5/8

  • SIM/Memory Card
    2× Nano SIM card /
    1× Nano SIM card + 1× Memory card

  • Wi-Fi IEEE802.11 ac/a/b/g/n

  • Bluetooth Bluetooth 5.0

  • GNSS GPS, Beidou, Glonass, Galileo

  • FM Yes

  • Earphone Port 3.5mm

  • USB Port Type-C

Other Features

  • Video File Format 3GP, MPEG4, etc.
  • Audio File Format WAV, MP3, AAC, AMR, MIDI, APE, WMA, etc.
  • Memory Card Support Up to 512GB
  • Language Multi-language
  • Sensor G-sensor, P-sensor, L-sensor, compass

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals