The Great Outdoors 72135-66 Noble Hill 4 Light Black Outdoor Post Light Instruction Manual
- June 13, 2024
- THE GREAT OUTDOORS
Table of Contents
The Great Outdoors 72135-66 Noble Hill 4 Light Black Outdoor Post Light
Product Information
- Model: 72135-66
- Product Name: Fixture
- Manufacturer: [Manufacturer Name]
Product Usage Instructions
Preparing for Installation:
- Shut off power at the fuse box or circuit breaker box.
- Remove the old fixture, including the mounting hardware.
- Unpack the new fixture and lay out all the parts in a clear area, taking care not to misplace any small parts necessary for installation.
- Pull out the black, white, and ground wires from the base cup (D).
Connecting the Wires:
-
While supporting the fixture, connect the electrical wires as shown in Fig. 2. Ensure that all wire connectors (F) are secured.
If your post has a ground wire (green or bare copper), connect the fixture ground wire to it. If not, consult an electrician for proper grounding. -
Tuck the wire connectors carefully inside the base cup (G) (Not included).
Completing the Installation:
- Remove screws (C) to separate the cover (A) from the fixture body (H).
- Align the base cup (I) with the post (G) and secure it with screws (J).
- Install the glass panels (B) into the holder of the fixture body (H) and secure them with frame tabs (E) at the top and bottom.
- Install four candelabra base bulbs (D) up to 60 watts or CFL or LED equivalent (not included) according to the fixture specification. DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
- Align the cover (A) onto the fixture body (H) and secure it with screws (C).
Your installation is now complete. Restore power and test the fixture.
IMPORTANT: The fixture should be installed by a qualified electrician to ensure proper wiring and installation.
Product Components:
- Glass: G72133-1
- Candle Cover: CCV21070P-66
Fixture Wires:
| Black or Smooth | White or Ribbed | Bare Copper (Ground) |
|---|---|---|
| Fixture Wires | Fixture Wires | Fixture Wires |
| House Wires | House Wires | House Wires |
INSTALLATION INSTRUCTIONS
Model # 72135-66
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
PREPARING FOR INSTALLATION (Fig. 1)
-
Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
-
Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
-
Pull black, white and ground wire out of base cup (D). CONNECTING THE WIRES (Fig. 2)
-
While supporting the fixture, connect electrical wires as shown in (Fig.2). Making sure that all wire connectors (F) are secured. If your post has a ground wire (green or bare copper), connect fixture ground wire to it. If not, consult your electrician for proper grounding.
-
Tuck wire connectors carefully inside base cup (G) (Not included).
COMPLETING THE INSTALLATION (Fig. 1) -
Remove screws (C) to separate cover (A) from fixture body (H).
-
Align base cup (I) with post (G) and secure with screws (J).
-
Install glass panels (B) into the holder of fixture body (H) and secure with frame tabs (E) top and bottom.
-
Install (4) four candelabra base bulbs (D) up to 60 watts or CFL or LED equivalent (not included) in accordance with the fixture specification. —DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
-
Align cover (A) onto fixture body (H) and secure with screws (C).
Your installation is now complete. Return power and
test the fixture.
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO
ENSURE PROPER WIRING AND INSTALLATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>