Fame Audio MT-115B Subwoofer Passive Speaker Instructions
- June 13, 2024
- Fame Audio
Table of Contents
- Important safety instructions! Please read before connection!
- Symbols on device and packaging
- Installation
- Congratulations on your new Fame Explorer 2.10!
- Your Fame Team
- Intended use
- Set up
- Connections and controls
- Operation
- Mono mode
- Technical data
- Troubleshooting
- Environmental protection
- Documents / Resources
Fame Audio MT-115B Subwoofer Passive Speaker
Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the
device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your dealer. In the case of a malfunction of the device, operation must also be stopped immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is
damaged in any way, it must be replaced immediately with an original spare
part from the manufacturer.
Always make sure that the grounding of the device is maintained. Use only the supplied power cords and always maintain the side grounded contacts. Make sure that the sockets used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must
be kept out of the reach of babies and children due to the risk of
suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that children do not remove (small) parts from the device, as they could suffocate by swallowing parts!
DANGER! (Hearing damage)
Professional speaker systems are able to generate harmful sound levels. Even
the influence
of seemingly harmless sound levels over a longer period of time can lead to
permanent damage to the hearing (from approx. 95 dBA SPL).
Therefore, always wear professional hearing protection (earplugs or capsule
ear protectors) during operation!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources, naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.
Hint! (Operating conditions)
In advance, it must be clarified with the manufacturer whether the device is
also suitable for outdoor use.
Always keep a minimum distance of 20 cm from walls or other structural objects.
Never expose the device to direct rain, moisture or liquids, as this can lead to damage.
Vibrations, dust or sunlight can also cause damage, avoid them!
Hint! (Power supply)
It is essential that you check that the device voltage matches your local
mains voltage. It is highly recommended that you fuse your mains socket with a
residual current circuit breaker (FI).
If you do not use your device for a longer period of time or carry out
maintenance work,
disconnect the device from the mains in order to minimize danger. The same
applies to storm conditions such as thunderstorms, floods, etc.
Hint! (Fuses)
Replace fuses only with IEC127 type (5x20mm) and the correct rating to ensure
optimum performance! It is forbidden to use short-circuited fuses or to bridge
the fuse holder.
Fuses may only be replaced by qualified personnel.
Hint! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient
temperature before commissioning.
Hint! (Unwanted odours)
A new product can sometimes lead to unwanted odours. This reaction is normal
and disappears after a few minutes.
Hint! (Possible damage due to magnetic fields)
Speakers cause a static magnetic field. Ensure sufficient distance from
equipment that may be affected.
Symbols on device and packaging
The lightning flash symbol warns the user of uninsulated voltages and the risk
of electric shock.
The exclamation mark symbol draws the user’s attention to important maintains
and operating instructions in the manual.
The lightning warns you of dangerous voltage accessible from the outside. A
connection to any terminal marked with this symbol may only be made with a
ready-made cable that complies with the manufacturer’s recommendations or with
cables installed by qualified personnel.
This symbol warns of hot surfaces. To avoid burns – DO NOT touch!
Only suitable for indoor use.
Read the manual
Please read and follow the warnings and recommendations carefully to ensure safe and trouble-free use.
Installation
Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use.
During assembly, suitable protective equipment (in particular head protection,
gloves and safety shoes) must be worn and only suitable climbing aids
(ladders, scaffolding, etc.) must be used.
The responsibility for this lies solely with the installation company.
The installation may only be carried out by experts and only at mounting points with sufficient load-bearing capacity, if necessary taking construction requirements into account. The fixing material (screws, dowels, etc.) specified by the manufacturer in the assembly instructions must be used. Screw connections must be secured against loosening by suitable measures.
Fixed or mobile installations shall be protected against falling by two independently acting devices. Loose additional parts or parts which come loose must be able to be caught by suitable devices. National regulations must be observed when using fasteners and fixing elements as well as slings. With regard to the dimensioning of the securing devices, possible dynamic loads (jerking forces) must also be taken into account.
ATTENTION! (Inspection measures)
After installation, check the suspension of the system consisting of bracket
and loudspeaker for secure fastening. The operator of loudspeaker systems
(stationary or mobile) is obliged to regularly inspect all system components
or have them inspected in accordance with the relevant national regulations
and to have any damage repaired immediately. Furthermore, we urgently
recommend detailed documentation of all inspection measures in test books or
similar.
ATTENTION! (Load capacity)
When loudspeakers are longer or permanently used outdoors, wind loads, snow
and ice loads as well as thermal influences must be taken into account for the
stability and loadbearing capacity of structures and surfaces.
In particular, the load-bearing points of flown systems should be dimensioned
with sufficient safety reserves. The national regulations must be observed.
WARNING! (Risk of injury from overturning)
Improper installation can cause considerable injury and damage! During
transport and installation, ensure that only aids specified by the
manufacturer (e.g. trolleys, stands, tripods, brackets, etc.) are used and
always follow the manufacturer’s instructions!
Hint! (Special measures)
Special measures may also be required to prevent spectators from behaving
dangerously.
Tripods must not be set up in escape and rescue routes. When installing in
traffic routes, the required width of the paths and proper blocking and
marking must be ensured. When setting up and setting down a special hazard.
Suitable aids must be used for this purpose.
The national regulations must be observed.
Using this device with sinusoidal, square-wave or other measuring signals at higher levels will cause serious damage to the device!
Congratulations on your new Fame Explorer 2.10!
Thank you for choosing a Fame product. Through efficient development and economical production, Fame enables high quality products at a fantastic price.
Please read the instruction manual carefully to learn about all the features of this product and keep it for future use.
Have fun with your new product!
Your Fame Team
Guarantee:
The current general terms and guarantee conditions of the Music Store professional GmbH apply.
You can view it at: www.musicstore.de
If you have any questions or suggestions, please contact us:
Music Store professional GmbH
Istanbulstr. 22-26
51103 Cologne
Managing Director: Michael Sauer
WEEE-Reg.-No. DE 41617453
Tel: +49 221 8884-0
Fax: +49 221 8884-2500
info@musicstore.de
Scope of delivery:
Content
|
Quantity
---|---
Subwoofer| 1
Satellite| 2
Manual| 1
Power cable| 1
Speaker Cable| 2
Intended use
The product Fame Explorer 2.10 is optimized for use with music and speech signals. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
It must be ensured that the device is operated exclusively by trained and competent users who are in full possession of their mental, physical and sensory abilities. The use of other persons is expressly only permitted at the request of a person responsible for their safety, who instructs or supervises the use.
Set up
All connections of the device should be made before switching on. Only use high-quality and undamaged cables that are as short as possible for the connections.
Configuration of the audio input connector
CH1 – CH4
XLR/jack (6,35mm) – jack combo, balanced
CH5 – CH6
RCA/Cinch – Mono/Stereo (6,35mm)
CH7 – CH8
AUX, 3,5mm Stereo-Jack
Connections and controls
No. | Designation | No. | Designation |
---|---|---|---|
1 | Setup Switch Left : Stereo-Mode | ||
Right : Mono-Mode | 12 | **Echo |
Control for setting the echo effect
2| CH1 – CH4 Input
XLR/Jack (6,35mm) mono balance Input| 13| Delay
Control for setting the delay effect
3| CH1 – CH4 Level – Control
Volume control for the individual inputs| 14| Subwoofer Volume
Control
Control for adjusting the volume of the subwoofer
4| CH1 – CH4 MIC/Line Select Switch to adjust the input level:
LINE : for audio devices with line output
MIC : for microphone| 15| Master Volume Control
Volume control for the overall volume
****5| CH1 – CH4 Tone Control
Those switches allow you to adjust the tone effect, boost the low and high
frequency once reduce midrange.| 16| POWER/LIMIT LED
LED shines blue : The system is connected and switched on.
LED shines red : Lights when the signal level is too high or a current
overload is detected.
6| CH5-CH6 Input
RCA/Cinch Mono/Stereo (6,35mm)| 17| Monitor Output
For connection to a stereo monitor system
7| CH6 – CH6 Level – Control
Volume control for the individual inputs| 18| Speaker LED
This two-color LED indicates the status of each speaker output:
Green – active speaker output
Red – inactive speaker output
8| CH7 – CH8 Input 3,5mm Stereo-jack socket for connecting MP3 or CD
players, tablets, smartphones and PCs or Bluetooth-function| 19| L/R
Speaker Output
for included satellite speakers
9| Bluetooth Control Pressing a key activates the pairing mode. The
LED flashes during pairing and lights up constantly when a connection is
established.
To reset a connection, press the key again.| 20| Power switch
10| Bluetooth LED Display LED off : Bluetooth function switched off
permanent lights : Bluetooth function activated
LED flashes : Pairing mode| 21| Fuse
T3.15AL/250V
11| Switch CH7-CH8
Switch to select AUX input or Bluetooth function| 22| Power
Outlet**
Operation
The Fame Explorer 2.10 can be operated in stereo mode as well as in mono mode. The setting is done via the setup switch (1) on the back of the subwoofer.
Stereo mode
In stereo mode both outputs are active and the two satellite speakers are split to be used as a 2.1 sound system.
-
Insert the pole socket in speaker stand
-
Take out satellite from SUB
-
Slip the satellite to comment with SUB socket
-
install another satellite. 2.1 stereo system is done.
Mono mode
In mono mode, only the left output is active and the two satellite speakers are connected together to concentrate their power on one output. Mono mode includes either a compact mono setup (A) or the standard mono setup (B).
MONO ETUP INCLUDECOMPACTMONO ET PA D TANDARD MONO SETUP A BELOW:
Notice:
Please note that the tripods are not included in the scope of delivery, but
must be purchased as an option. The Explorer Tripod SET from Fame (item number
PAH0021771-000) is recommended as a suitable tripod.
Technical data
Model
| | Explorer 2.10
---|---|---
Type| Subwoofer| Satellite
Quantity| 1| 2
Power Output| 250 Watt RMS| Mono-Mode: 60 Watt RMS
Stereo-Mode: 120 Watt RMS
Subwoofer| 10“|
Satellite| | WF: 4,75“
| TW: 1“
Power Output Total| 350 Watt RMS
Fuse| T3.15AL/250V
Frequency fange| 50 Hz – 160 Hz| 155 Hz – 20 kHz
System frequency| 50 Hz – 20 kHz, +/-3 dB
Limiter| Soft Limit
Input| XLR/Jack-Combo, RCA/Cinch, 3,5mm Stereo-Jack
Output| TS Stereo Monitor Output
Bluetooth-function| Yes
Power connect| IEC
Power supply| 220-240 VAC – 50/60 Hz
Max. SPL| 123 dB| Mono-Mode: 125 dB
Stereo-Mode: 130 dB
Material| Plastic
Dimensions (H x W x D)| 458 x 350 x 407 mm| 227 x 140 x 155 mm
Weight| 14 kg| 4 kg
Colour| Black
Troubleshooting
The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the device on your own!
Symptom
|
Troubleshooting
---|---
No function| Check the network connection and the fuse
No sound from loudspeaker, but power LED lights up| Check the cable
connections at the inputs and outputs
The speaker or XLR cables may be defective. Please replace them
If the specified corrections have not led to success, please contact our service staff. The contact details can be found at www.musicstore.de
Cleaning:
The ventilation grilles of the unit must be cleaned regularly from impurities
such as dust and dirt.
Switch off the unit before cleaning and disconnect mains operated units from
the mains supply.
Use a lint-free, damp cloth for cleaning. Never use alcohol or solvents for
cleaning!
Do not open the device. The device does not contain any assemblies or
components that can be replaced or maintained by the user.
In case of damage, do not put the device into operation under any
circumstances. Service work or repairs may only be carried out by qualified
service personnel, in particular in the following cases:
- Objects or liquids have penetrated into the device.
- The unit does not operate as normal.
- The unit has been dropped or the cabinet has been damaged.
Environmental protection
The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please dispose of and recycle the packaging components after use properly.
Disposal of packaging:
Ensure that paper packaging, plastic materials, etc. are separately recycled.
Observe the corresponding disposal instructions on the packaging.
Disposal of batteries:
Batteries do not belong in the garbage! Please keep batteries in accordance
with the official collection points or disposal stations in accordance with
the specifications.
Disposal of your old device:
Do not dispose of the device with household waste! This device is subject to
the WEEE Directive (Waste Electrical and Electronic Equipment) in its
currently valid version.
The device will be disposed of by an approved waste disposal company or your local waste disposal office. The regulations valid in your country must be observed!
Manufacturer: MUSIC STORE professional GmbH,
Istanbulstraße 22-26,
51103 Cologne, Germany
Documents / Resources
| Fame
Audio MT-115B Subwoofer Passive
Speaker
[pdf] Instructions
MT-115B Subwoofer Passive Speaker, MT-115B, Subwoofer Passive Speaker, Passive
Speaker, Speaker
---|---
References
- MUSIC STORE - Online Shop für Musikinstrumente - Deutschland | MUSIC STORE professional
- Music Store Online-Shop für Musikinstrumente | MUSIC STORE professional
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>