ARROW CDA-47702-P1A Pressure Injectable Lumen CVC User Manual
- June 5, 2024
- Arrow
Table of Contents
Pressure Injectable Arrowg+ard Blue Plus® Two-Lumen CVC
Contents:
1: Arrowg+ard Blue Plus®1 Two-Lumen Catheter: 7 Fr. (2.5 mm OD) x 20 cm,
Pressure Injectable
1: Spring-Wire Guide, Marked: .032″ (0.81 mm) dia. x 23-5/8″ (60 cm) (Straight
Soft Tip on One End – “J” Tip on Other) with Arrow Advancer
1: Catheter: 18 Ga. x 2-1/2″ (6.35 cm) Radiopaque over 20 Ga. RW Introducer
Needle
1: Pressure Transduction Probe
1: Introducer Needle: Echogenic 18 Ga. x 2-1/2″ (6.35 cm) XTW and 5 mL Arrow®
Raulerson Spring-Wire Introduction Syringe
1: Injection Needle: EclipseTM2 22 Ga. x 1-1/2″ (3.81 cm) RW and 5 mL Luer-
Slip Syringe
1: Injection Needle: EclipseTM2 25 Ga. x 1″ (2.54 cm) RW and 3 mL Luer-Lock
Syringe
1: Syringe: 10 mL Luer-Lock
1: Tissue Dilator: 8.5 Fr. (2.8 mm) x 10.2 cm
1: SecondSiteTM Adjustable Hub: Fastener
1: SecondSiteTM Adjustable Hub: Catheter Clamp
1: SharpsAway® Disposal Cup
1: SharpsAway® II Locking Disposal Cup
1: Maximal Barrier DrapeTM with 4″ fenestration
1: Towel
1: Needle Holder
1: Forceps
1: Safety Scalpel: #11
1: Checklist/CLIP Sheet
1: Sterile Procedure Sign
2: Gauze Pad: 2″ x 2″ (5 cm x 5 cm)
5: Gauze Pad: 4″ x 4″ (10 cm x 10 cm)
1: Dressing: Tegaderm®3 10 cm x 12 cm
1: Surgical Apparel: Impervious Gown
1: Surgical Apparel: Bouffant Cap
1: Surgical Apparel: Mask with Eye Shield
1: Suture: 3-0 Silk with Curved Needle
1: HemoHopper® Fluid Receptacle
1Licensed under US Patent No. 7,329,412.
2A trademark of Becton, Dickinson and Company.
3A registered trademark of 3M Company.
Not made with natural rubber latex.
Store below 25°C (77°F). Avoid excessive heat above 40°C (104°F).
Contraindications: The Arrowg+ard Blue Plus antimicrobial catheter is
contraindicated for patients with known hypersensitivity to chlorhexidine,
silver sulfadiazine and/or sulfa drugs.
| *Priming Volume (mL)| Gravity Flow Rate† (mL/hr)| MAX Pressure
Injection Flow
Rate (mL/sec)
---|---|---|---
Distal ( 14 Ga . )
Proximal ( 18 Ga. )| 0.57
0.40| 4731
913| 10
10
- Priming volumes are approximate and are done without accessories.
Flow rate values are approximate and are determined using deionized water at 100 cm head height.
** Pressure injection flow rates are determined using media of 11.8 centipoise (cP) viscosity, with 152 cm administration set tubing.
LBL053599 R00 (2022-01)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>