collingwood H2 Lite 500 Matt White LED Downlight Installation Guide
- June 13, 2024
- COLLINGWOOD
Table of Contents
H2 Lite
Installation instructions
Installation data
- Isalate the mains supply, prior to wiring.
- This unit must be wired by a qualified slectrician or suitable competent persan, Forindaar use only.
- Rated voltage 220240V AC,
- Input current 0.0254.
- H2 Lite & not compatible with auto detect dimming functions. Auto detect must be switched offor disabled,
- Colingwood Lighting advises the following maximum loads to assist functionalityof the dimming driverwhen used with suitable standard mains wall dimmers,
- 7 x urits on @ 250W dimmer
- 14x units on S00W dimmer
- 21 xunits on a 1000W dimmer
- Farbetter dimming performance, use dimmerswhich have been designed for electronic LED drivers, eg
- Callinguood DM298 – Min 1, max10 unts
- VariightV COM 220/~ Min 3, max 26 unit.
- Hager Galery WXF0S3-Min 1, max 10 unts
- Legrand Cellane 067083 – i, max 0 unis.
- ifindoub, contact the dimmer manufacture foradvice. Guote the nput power of 43, and inrush cument of LIAD.02ms
- The above boad advice s forguidance anly Al installations must complywith the appropriate standards
- Input powier 4.3W / Povierfactor 06
- Suitablefor firerated ceiings, see colinguoodighting.com for more detais
- The driverisreplaceable at end of Ife and should be replaced by a professional. Contact Colinguiaselst order DRV368450 replacement drivers
** Disposal of this product should be separate from household waste. Please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resource. Household users should
contact their local government office for details of where and how they can
take these items for environmentally safe recycling.
7 year warranty 7 ans de garantie
Replaceable light source by a
professional Source remplagable par un professionnel
Replaceable control gear by a professional
Alimentation remplagable par un professionnel
Cut ceiling hole
Connect tomains
Install centrally into ceiling hole*
The productis insulation coverable
Cord grip adaptor / Wired connector
- insert pivot legsinto loation holes
- push firmly to snap shut
- To open connector, lever apart
t +44 (0) 1604 495151
f +44 (0) 1604 495095
e sales@collingwoodgroup.com
w collingwoodlighting.com
Collingwood Lighting, Brooklands House, Sywell Aerodrome, Sywell, Northampton
NN6 OBT, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>