Cloudy Bay LJD004BLWH-6PK 4 Inch Smart LED Recessed Ceiling Light With RGB Back Light User Manual
- June 13, 2024
- Cloudy Bay
Table of Contents
Cloudy Bay LJD004BLWH-6PK 4 Inch Smart LED Recessed Ceiling Light With RGB Back Light User Manual
GET READY
· Please make sure your mobile device is connected to the 2.4GHz Wi-Fi and mobile device Bluetooth is turned on.
REGISTRATION
SETUP HUB
You can connect Max.30 lights with one Hub ideally. If you have already installed the CloudyBay Hub, Please skip to Page 5 to add more lights.
Step1: Activate Pairing Mode
Hold the Button for 5 seconds. Please conflrm the indicator is blinking.
Note: Please make sure your mobile device is connected to the 2.4GHz Wi-Fi and mobile device Bluetooth is turned on.
Step2: Add the Hub
Launch the CloudyBay APP and follow the instructions below to add a hub .
SETUP LIGHTS
Step1: Activate Pairing Mode
Please make sure the lights are powered off for more than 10 seconds before
adding.
Then turn on/off 3 times (on-off-on-off-on), 2 to 4 seconds between each on
and off.
Waiting few seconds until the lights blinking rapidly.
NOTICE
Considering the loading capacity of your house Router and WiFi signal problem.
- We don1t suggest you add more than 6 lights at one time.
- Some lights might fail to add to CloudyBay APP during this process. Don’t worry, just try few more times with steps on Page 5 to 6 until all lights are added to ClodudyBay APP.
Your patience is highly appreciated, Thank you!
Step2: Add the lights
Tap the Hub icon in the CloudyBay APP and follow the instructions below to add
the lights.
LIGHT CONTROL
Light Control Panel
If you want to fully control the light, you need to tap the light icon from
the device list to enter the control panel.
GROUP LIGHTS
Group Control
You can create lighting groups for different rooms or spaces in the CloudyBay App, and they can be controlled not only as a group, but also individually.
FAQ
-
Can I dim these lights by physical dimmer ?
No, these lights can only be dimmed by APP control or Voice control. -
Why can’t I activate the pairing mode?
Please make sure the interval between each on/off is 2 to 4 seconds and the light is on each time. Please power off the light for more than 10 seconds before restarting this process. -
Can I use the 5GHz Wi-Fi to add the lights?
No, only support 2.4GHz Wi-Fi and please make sure step lights and your mobile device were connected to the same Wi-Fi network. -
How to group lights in the Amazon Alexa or Google Home?
Please refer to Voice Control Guide. -
Why the lights flash when I control them by wall switch ?
Turning on/off continuously by the wall switch may accidentally activate pairing mode. Just turn it off, wait 30 seconds, then turn it on, it will be back to normal. -
Can I remote control the lights via mobile network?
Yes. Please make sure the lights are online, you could check the lights status in the CloudyBay App. -
How many lights can I connect?
We recommend assigning Max.30 lights to each hub. -
Can I share the lights with my family?
Yes, you can. Your family need to get CloudyBay APP and sign in. Then you can share one or more lights with him/her to his/her account.
TIPS
Warranty
The product carries a 3-year warranty from purchase date. Please feel free to
contact us when you have any product problem or suggestions. We take care of
all quality-related issues with a REPLACEMENT or FULL REFUND.
Data Security
CloudyBay smart products are based on Tuya (NYSE: TUYA) loT PaaS platform, and
who’s data center set up in the United States.
More Smart Products
Visit https://cloudybaylighting.com/smart/ to flnd more CloudyBay smart
products.
Support
Visit https://cloudybaylighting.com/smart/help ,
or contact us by smart@cloudybaylighting.com to
reach us for help.
©2022 CloudyBay Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>