KUZCO EW6308 LED Exterior Wall Lamp Instruction Manual
- June 4, 2024
- KUZCO
Table of Contents
KUZCO EW6308 LED Exterior Wall Lamp
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all time during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Please Note:
- All Kuzco LED fixtures come with pre-wired LED module(s).
- Unless instructed to do so, please do not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage.
- For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.
- Remove the fixture from its original packaging. Remove the mounting plate (1c) from within the canopy (1f) by removing the two nuts (2a). Pull out the mounting plate (1c) from within the canopy (1f) and attach it to the electrical junction box (1a) , using the two screws (1e) provided in the hardware package.
- Attach all wiring with the provided marrets (1b) (white to white “N”, black to black “L”, ground to ground “G”).
- Align the canopy (1f) to the mounting plate (1c) and screw in the two nuts (2a) provided to secure.
- Next, secure the fixture (2c) to the canopy (1f) using the four set screws and Allen Key (2b) provided.
- You have now completed the installation of your fixture, do enjoy.
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W:kuzcolighting.com
20181127
Documents / Resources
|
KUZCO EW6308 LED Exterior Wall
Lamp
[pdf] Instruction Manual
EW6308, LED Exterior Wall Lamp, Wall Lamp, LED Exterior Lamp, Lamp, EW6308
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>