Litum A.S 100A Endurance Anchor Instruction Manual
- June 5, 2024
- Litum
Table of Contents
Litum A.S 100A Endurance Anchor Instruction Manual
Do you have all the tools needed?
INSTRUCTIONS
WHERE TO MOUNT
HOW TO MOUNT
OPERATION
When the device is connected to a stable power supply, service LED should
start to blink.
The service LED will light up and remain steady when the device is
communicating with a server.
RF Comm LED indicates RF communication is active.
The device has an internal backup battery. Turn the backup battery switch on to ensure the device continues to work during power outage or emergencies. To turn off the device completely, the backup battery switch should be turned off.
Devices with RS232 or RS485 communications can be connected to the device through the optional Aux Comm port.
Please contact Litum for supported devices.
Digital input and relay output can be pushed through the optional I/O port. For details please contact Litum.
In case of emergencies that can be triggered by the system, the siren and the lights will provide alerts.
TCP LED will only be available if the device is a gateway and it will be constantly on. Network settings for the gateways will be done by Litum.
LITUM LIMITED HARDWARE WARRANTY
This Limited Product Warranty (“Warranty”) is an agreement between the buyer (“Buyer”) and Lİtum Bilgi Teknolojileri San. Ve Dıs Tic. A.S (“Seller”) applicable to hardware (“Product”, “Products”) provided by the Seller.
- Seller warrants the Buyer that the Product will substantially conform to Seller’s then-current published specifications for such Product. This limited warranty lasts one year from the date of shipment to Buyer and it is available worldwide.
- If a Product is to be returned to Seller, Buyer shall, at its expense, return the Product in accordance with Seller instructions, including use of the Return Material Authorization (RMA) number assigned by the Seller, detailed description of the problem, and return shipping information including return address and contact person.
- Any Product returned to Seller under this warranty should be packaged in a sturdy, outside shipping carton, to prevent damage in transit and should not contain any hazardous and forbidden materials.
- Seller obligations under this limited warranty are: (a) subject to Buyer’s compliance with Seller then- current RMA procedures; (b) subject to Buyer’s written notice to Seller of a warranty claim during the applicable warranty period; and (c) limited to Products that are received by Seller no later than four weeks following the last day of the applicable warranty period and are determined by Seller to be covered by the warranty provided in these terms. Seller will make the final determination as to whether a Product is defective.
- If Seller determines, after an examination of the returned Product, that a returned Product is not defective under the warranty, then Buyer will be notified, the Product will be returned at Buyer’s expense and Buyer will pay for Seller for its examination and/or testing of by Seller at its rates then in effect. Seller may offer out- of-warranty repair services for Products at rates then in effect.
- If Seller reasonably confirms that a Product is defective under the warranty and not covered by the exclusions below, then Seller shall, at its option and expense and in accordance with these terms, either: (a) repair the Product; (b) replace the Product; or (c) issue a credit or refund for the amount paid by Buyer for the Product.
- If Seller elects to repair or replace a Product, Seller will have 20 business days to repair the Product or provide a replacement.
- A repair/replacement under this warranty is free of charge. The warranty repair does not restart the warranty period; all Products repaired or replaced under warranty shall be warranted for the remainder of the warranty period or 90 days. Repaired or replaced Products may contain used or refurbished parts. Replaced parts or Products become Seller property.
- The repaired/replaced Product is returned to the Buyer at Seller expense. Seller may not be held responsible for any legal fees, taxes and/or handling fees that can be associated with shipment of the Product to and from Seller.
- The warranty covers all defects of the Product during the warranty period due to faults in workmanship or material at the shipping date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the Product has been misused, installed and/or used contrary to the instruction manual.
- Seller has the right to render the warranty null and void in the following cases:
a. If the Product has been altered or modified.
b. If the Product has been attempted to be opened in order to modify the
enclosure. This will degrade the ingress protection of the Product which may
cause dust and water ingress.
c. If the Product has been attempted to be repaired by non-authorized service
without prior authorization by the Seller.
d. If the Product has been connected to an improper power supply (amps,
voltage, frequency).
e. If the Product has sustained damage due to external influences or foreign
substances including but not limited to the following:
i. if the Product has been dropped or has marks of mechanical or chemical
damage,
ii. if the Product has been damaged as a result of fire or natural disasters,
iii. if the Product has been damaged as a result of liquids or other
substances getting inside,
iv. if the Product original identification markings (trademark, serial number)
have been modified, rubbed off, removed or is illegible, or has been
programmatically deleted (for devices
with unique serial number).
f. If the Product was used with non-approved accessories and/or parts.
Product Data Sheet
GATEWAY SERIES
LITUM® GATEWAY ENDURANCE
Litum Gateway Series products are fundamental to the mesh network required to track, monitor and locate staff, equipment and assets. Litum Anchor Endurance is specifically engineered for optimum performance in rough environments with a robust design.
Litum RTLS system allows gateways to work together seamlessly with anchors to collect and transfer high accuracy location information.
Features
- Optimized for demanding environments
- Back-up battery
- Built-in alarm siren
- Optional sensors: temperature, humidity, and gas
Benefits
- Wide area coverage
- Highly accurate location detection
- Automated network discovery and connection.
- Operates during power outages w/ back-up battery.
- One-time license fee
- No interference with other RF equipment
Technical Specifications
Supporting Document List
- Installation Manual
- Product Warranty
- Certifications
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could
void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Endurance Anchor belongs to FCC Part 15.517 indoor UWB systems.
“This equipment may only be operated indoors. Operation outdoors is in
violation of 47 U.S.C.
301 and could subject the operator to serious legal penalties.”
IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read More About This Manual & Download PDF:
References
- Litum RTLS - Indoor Tracking Services - Real Time Location
- Indoor Tracking Services - Real Time Location - RTLS | Litum
- Litum RTLS - Indoor Tracking Services - Real Time Location