BEGA 50031P Ceiling and Wall Luminaire Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

BEGA 50031P Ceiling and Wall Luminaire
Product Information
Product Usage Instructions
Technical amendments reserved
DIMENSIONS
Instructions for use
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50031P Ceiling and Wall Luminaire

BEGA-50031P-Ceiling-and-Wall-Luminaire-PRODUCT

Product Information

The product is a luminaire that requires installation and operation according to national safety regulations. The installation and commissioning should only be done by a qualified electrician. The manufacturer is not liable for any damage caused by improper use or installation. The luminaire is equipped with electronic components that are protected against overvoltage by DIN EN 61547. However, for additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website (www.bega.com).

The luminaire comes in different models with varying specifications:

Model : 50 031 P K3
- Color temperature: 3000 K
- Colour rendering index (CRI) : > 90
- Module luminous flux: 2415 lm
- Luminaire luminous flux: 2145 lm
- Luminaire luminous efficiency: 109.4 lm/W
- Lamp module connected wattage: 16.4 W
- Luminaire connected wattage : 19.6 W
Model : 50 031 P K2
- Color temperature: 2700 K
- Colour rendering index (CRI): > 90
- Module luminous flux: 2335 lm
- Luminaire luminous flux: 2073 lm
- Luminaire luminous efficiency: 105.8 lm/W
- Lamp module connected wattage: 16.4 W
- Luminaire connected wattage: 19.6 W
Model : 50 031 P K4
- Colour temperature: 4000 K
- Colour rendering index (CRI): > 90
- Module luminous flux: 2510 lm
- Luminaire luminous flux: 2229 lm
- Luminaire luminous efficiency: 113.7 lm/W
- Lamp module connected wattage : 16.4 W
- Luminaire connected wattage: 19.6 W

The luminaire also offers optional metal trim rings on three enamel surfaces:

Part No: 13 004,
- Colour : white
Part No: 13 005,
- Colour : palladium
Part No: 13 006,
- Colour : glossy silver

Spares and replacement parts are available:

Synthetic covcolorrt No: 15 000 456
LED unit with colour temperature 2700 K, Parcolor75 001 902 .2K 27
LED unit with colour temperature 3000 K, Part No: 75 001 902.2K 3
LED unit with color temperature 4000 K, Part No: 75 001 902.2K 4

Product Usage Instructions

Safety:
- Follow national safety regulations for the installation and operation of the luminaire.
Overvoltage protection:
- To ensure additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.
Installation:
- Before installing the luminaire onto the mounting surface, insert the luminaire housing into the trim ring (if using a trim ring accessory).
Avoid touching the light output opening of the LED directly during installation or relamping.
To release the synthetic diffuser from the luminaire housing, turn it counterclockwise.
Optional accessories:
- Metal trim rings are available in three enamel surfaces and must be ordered separately using the provided part numbers.
For spares or replacement parts, refer to the provided part numbers for synthetic cover and LED units with different colour temperatures.

Technical amendments reserved

Ceiling and wall luminaire for indoor use

DIMENSIONS

$BEGA-50032P-Wall-And-Ceiling-Light-FIG- $1$$

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of impact resistant synthetic diffuser and metal housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required.

Product Description

Metal housing, finish color white Impact resistant synthetic diffuser, white, with bayonet closure 2 mounting holes ø 5.5 mm
Distance apart 230 mm 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@ Connection terminal 2.5@ Earth conductor connection
LED power supply unit 220-240 V x 0/50-60 Hz
BEGA Thermal Switch® Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Safety mark
Conformity mark
Weight : 1.7 kg

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.

You can find them on our website at www.bega.com.

Lamp
- Module connected wattage: 16.4 W
- Luminaire connected wattage : 19.6 W
- Rated temperature : ta = 25 °C
- Ambient temperature: ta max = 35 °C
50 032 P K3
- Color temperature: 3000 K
- Color rendering index : CRI > 90
- Module luminous flux: 2145 lm
- Luminaire luminous flux: 2145 lm
- Luminaire luminous efficiency: 109,4 lm / W
50 032 P K2
- Color temperature : 2700 K
- Color rendering index: CRI > 90
- Module luminous flux: 2335 lm
- Luminaire luminous flux : 2073 lm
- Luminaire luminous efficiency: 105,8 lm / W
50 032 P K4
- Colour temperature: 4000 K
- Color rendering index: CRI > 90
- Module luminous flux : 2510 lm
- Luminaire luminous flux: 2229 lm
- Luminaire luminous efficiency: 113,7 lm / W

Luminaire with trim ring:
Before installing onto the mounting surface the luminaire housing must be inserted into the trim ring (accessory).

Installation

LEDs are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Pass the main supply cable through the grommet into the luminaire housing.
Fix luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets. Dismantle the mains supply cable approx. 60 mm.
Pull silicone sleeves over the wires and make earth and electrical connections to the terminals. Place the synthetic diffuser into the luminaire housing and observe that the cam pins fit into the notches of the synthetic diffuser.
Screw in a synthetic diffuser by turning it clockwise. Thus, you reach a safe and vibration-resistant holding of the synthetic diffuser.
To release the synthetic diffuser from the luminaire housing, turn it counterclockwise.

Replacement of the LED unit
The designation of the LED unit is noted on a label in the luminaire. The light color and light output of BEGA replacement units correspond to those of the LED units originally fitted. The LED unit can be replaced by qualified persons using standard tools.

Disconnect from the main supply.
Unscrew the synthetic diffuser from the luminaire housing by turning it counterclockwise.
Disassemble the LED unit.
Assemble the LED replacement unit.
Note the installation instructions for the LED unit.
Screw in a synthetic diffuser by turning it clockwise.
A damaged synthetic diffuser must be replaced.

Accessory Trim rings
For this luminaire metal trim rings in 3 enamel surfaces are optionally available. Trim rings are accessories and must be ordered separately.

Part. No