Front Runner KVRP004T Slimpro Van Rack Kit Installation Guide
- October 30, 2023
- Front Runner
Table of Contents
RAM Pro Master 2500 136” WB Low Roof
(2014-current) Van Rack Kit
KVRP004T
START HERE! READ ME FIRST
Don’t be a hero and muscle through this installation without reading these
fitting instructions first! Improper installation of this gear may void certain
aspects of your warranty.
Before you begin, take a moment and open all your Front Runner Rack Kit boxes
and gather the assembly instructions for the various components.
A complete kit will contain:
- Front Runner Mounting System specific to your vehicle
- Front Runner Rack Tray or Load Bar Slats
This document will guide you through the assembly of the Mounting System and
assist you in fitting the Rack Tray or Load Bars to your specific vehicle.
Please refer to the next page for a list of all the components, quantities and
tools required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY
ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE
RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR
VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING
THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND
UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT
RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF
THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE
NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE
PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the
failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this
product.
CHECK ONLINE FOR THE LATEST FITMENT GUIDE
- GET ORGANIZED
IN| THE| BOX
---|---|---
1| 2X| Side Profile 1358mm
2| 2X| Side Profile 1560mm
3| 8X| Slat Assembly
4| 1X| Van Rack Wind Deflector
5| 1X| Van Rack Joiner Kit
6| 2X| Van Track End Cap (Pair)
7| 3X| FPCR Foot (Pair)
TOOLS NEEDED
![Front Runner KVRP004T Slimpro Van Rack Kit
- TOOLS 3](https://manuals.plus/wp-content/uploads/2023/06/Front-Runner- KVRP004T-Slimpro-Van-Rack-Kit-TOOLS-3.png)
PLUG REMOVAL
SIDE PROFILE ASSEMBLY
WIND DEFLECTOR ASSEMBLY
NARROW SLAT FIT & SECURE
COMPLETION
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
Now’s the time to visit your favorite Front Runner dealer in person or
online.
IMPORTANT!
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY
ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER FOR A
RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER
LOADING BEYOND THE VEHICLE MANUFACTURER’S STATED LOAD CAPACITY.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters
BornToRoam Share your adventures on:
KVRP004T_REV_A00
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
WWW.FRONTRUNNEROUTFITTERS.COM