UNIHOW HD-6500 Wireless Gaming Controller User Manual

HD-6500 Wireless Gaming Controller

Product Information: Kabelloser Gamecontroller

The Kabelloser Gamecontroller is a wireless gaming controller that can be used with various devices such as N-Switch&Lite, PC, and TV. It comes with a 2.4G Dangle that allows for wireless connectivity with compatible devices. The controller supports both Xinput and Dinput modes for use with different gaming systems and platforms.

Product Usage Instructions

Before using the Kabelloser Gamecontroller, ensure that it is fully charged using the included charging cable. The controller can be used in the following modes:

N-Switch&Lite mode

To use the controller with an N-Switch or N-Switch Lite, first turn on the console and navigate to the controller settings menu. From there, select “Change Grip/Order” and then press and hold the “Sync” button on the controller until the LED lights start flashing. The controller will then pair with the console and be ready to use.

PC mode

To use the controller with a PC, insert the 2.4G Dangle into an available USB port on the computer. The computer will automatically detect the controller and install any necessary drivers. Once the drivers are installed, the controller can be used in either Xinput or Dinput mode depending on the game or software being used.

TV mode

To use the controller with a TV, first ensure that the TV has a compatible USB port for the 2.4G Dangle. Insert the Dangle into the USB port and turn on the TV. The TV will automatically detect the
controller and install any necessary drivers. Once the drivers are installed, the controller can be used in either Xinput or Dinput mode depending on the game or software being used. When using the controller, ensure that it is within range of the device being used and avoid obstructions that may interfere with the wireless signal. The controller can be charged using the included charging cable and should be stored in a cool, dry place when not in use.

Wireless Game Controller

User Manual(HD-6500)

• This controller can be connected to switch, PC, android, ios devices.
• Support Bluetooth and data cable connection methods. 2.4G dangle(Also re-purchase).
• Support vibration and somatosensory functions ( if the device connected supports).
• Built-in lithium battery which can last 15h
  • *”Home” button wakes up the Switch host.
• The user manual introduces detailed functions and operations.

Button Instructions

Connect to N-Switch & lite

With Bluetooth

1. Click the controller Icon, then click “Change Grip/Ordet to enter the pairing interface
2. Press and hold the pairing button on the back of the controller for 1 second to turn on and enter the pairing state(at this time the LED will flash quickly)
3. 0nce connected, as shown in the picture above, press the “HOME” button of the controller to return to the operation

With data cable

1. Turn off the controller, open “Pro Controller Wired Communication” on Switch Host (routine: setting – Pro Controller Wired Communication – on), use the data cable to connect the controller to Switch
2. When the indicator light of the controller is on, unplug the data cable, the controller will automatically connect to the host via Bluetooth

To connect switch with cable, you need to turn on the connection function. Open mode: Setting-> controllerand sensors-> Pro Controller Wired Commu- nication as “on”, the connection can be normal

Auto reconnect

Once the controller has been connected to the N-Switch, just wake up the N-Switch and press the home button of the controller for 2 seconds, then the controller will reconnect to the N-Switch automaticaly. If the controller has been paired with other devices, you need to reconnect to the N-Switch according to method one or two.

Connect to Windows PC

With data cable

Connect directly to the computer through the data cable in the accessories. The indicator light will flash when the controller is not fully charged, and the indicator light will turn on when it is fully charged

With 2.4GHz adapter ( Not a default accessory )

1. press and hold the MN-switch pairing “of the controller for 2 seconds,the Led 1-4 flash quicklyat the sa me time
2. then insert the wireless adapter into computer USB port ledl and 2 will be on once connected

Connect to Android device With Bluetooth

Hold on “B” and “HOME” button of the controller for 2 seconds, the LEDI of the controller flashes quickly, enter the device Bluetooth interface search Bluetooth, LEDI will be on after

With 2.4GHz adapter (Not a default accessory)

1. press and hold the “N-switch pairing “of the controller for 2 seconds,the Led 1-4 flash quicklyat the same time
2. then insert the wireless adapter into computer I USB port ledl and 2 will be on once connected

With data cable

Connect directly to the computer through the data cable in the accessories. The indicator light will flash when the controller is not fully charged, and the indicator light will turn on when it is fully charged.

Connect to Apple device

The apple device only support bluetooth

Hold on “A” and “HOME” button of the controller for 2 seconds, the LED 2 of the controller flashes quicklyto search Bluetcnth, enter The Apple device (iOS, Mac OS) Bluetooth interface search, LED2 will be on once connected

Special feature

Custom the ML/MR button: M /MR support programming function. The software we develop make it possible to copy and store 30 seconds, up to 25 actions you programme (left joystick, right joystick, 3, R3, L, R, zL, zR,up, down, left, right, A, B, X, Y

Setting method

1. Turn the ML/MR button switch on the back of the con troller to the right to enable the ML/MR button function
2.  Press and hold the “O” button, then press the ML or MR button once, the current mode LED of the controller starts to flash, indicating that the ML or MR button has entered the programming state. After pressing the first buttonthe controller starts to record and store the actions you programme for 30 seconds Press the ML or MR button to save and edit the operation track within the record.

Note: When the recording exceeds 30 seconds the recording will be cut off at 30 seconds (mare than 2S buttons will also stap recordinq)to save.

Turbo function

• I Hold on the function button I and then press the “T” key to set the burst of the turbo
• [hold on the function button and [then press the “T” key üvice to set the automatic turbo

Close: Repeat the operation to close the “TURBOII function of the corresponding button

Tubo frequency adjustment

• Press setting and direction right button will speed up the turbo frequency
• Press setting and direction left button will slow down the turbo frequency

The TURBO frequency is divided into 3 levels of high, medium and low (15 times/s, 10 times/s, 5 times/s). The default setting is medium level (10times/s).

The D-pad and the left joystick function interchange

Press and hold the 11SettingsII button, and then press the button to interchange the functions of the left joystick and D-pad. At this time, both the “left joystick” and the “D-padl’ can control 8 directions

V: A. B. X. Y function interchange

Press and hold the “Settings” button, and then press the “sR ” button to interchange the functions of the A&BN X&Y Repeat this operation to switch back to the original function.

Vibration Strength adjustment

The function does not support Android &iOS

• Press setting and direction up button will strengthen the Oration
• Press setting and direction down button will weaken the vibration

The default vibration strength is 70%
Turn off the vibration function: When the vibration strength is 0%, the vibration function will be turned off. Strengthen the vibration will turn on the vibration function again Auto reconnect\auto shutdown\charging \low batter

Auto reconnect
Once the controller have been connected to the device, just press the “HOME” button about 1 second, and the controller will be reconnected to your device automatically

If the controller can not be reconnected to the device in 60 seconds, the controller will shutdown automatically.

Auto shutdown

If there’s no operation to the controller for 15 minutes, it will shutdown automatically.

Charging

1-4 LEDs flash slowly at the same time when the controller is charging; the LEDs will be always on when the controller is fully charged. At When using the wired connection mode LEDs will be always on when the controller is fully charged

low battery warning

If the controller is at low battery, the indicator light of the current mode flashes slowly. If the controller is at very low battery, it will shutdown automatically. After charged, it can be normally used again. If you don’t use it often, we advise to charge it every 30 days.

Product parameter

• Name: Game controller
• Model: HD-6500
• Support device: N-Switch/Win7 and above/Android/iOS/MAC OS
• Size/weight: capacity:650mAh/lnput:DC5V/1A/Working current:25-35mA
• Battery parameters: Bluetooth/WireIess/Wire
• Connection method: USB Type-c
• USB type: –12 hours
• Battery life: Custom the ML&MR button/ D-pad and the
• Special function: left joystick function interchange/Auto turbo

Packaging and accessories

Common problem

Q: What should do if cannot connect?
A: Please turn off the controller and follow the user manual again. If it doesn’t work, Please hold down the “Home” button for 10 seconds to reset the handle
Q Why can’t I operate after connecting?
A: Please make sure you connect according to the correct mode. If thwmode is correct, please refer to the question answer below
Q What should do if some games cannot be played on the N-Switch ?
A: Some games on the N-SwitCh do not Support pro controller, you need to change a game to operate
Q What should do if the reconnection interface pops up suddenly when playing a N-Switch game?
A: This problem may be that your Joycon joystick drifts, or you accidentally pressed the buttons on the Joycon
Q: What should do if mobile games cannot be controlled?
A: Whether it is an Android or an Apple game, the game itself needs to support the controller function to operate, please download the game that supports the controller
Q Why can’t my computer game be used?
A:

1. If it is an windows xp system, please upgrade to win7 and above, and check whether the computer-related controller driver is installed normally
2. Please make sure that the game supports the controller function
3. Please try to restart the computer and reconnect

Precautions

1. This product is not suitable for children of 3 years old and below
2. Please do not put this product in high temperature or high humidity environment
3.  Do not try to disassemble this product, so as not to cause unnecessary damage to the product
4.  This product has built-in battery, please do not throw it away with domestic garbage
5.  Do not charge the product near fire sources or other heat sources
6. Non-professionals should not disassemble this product, otherwise after-sales service will not be provided

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>