EZCOO EZ-SP12H2 HDMI Splitter 1X2 Dolby Vision HDR User Manual
- June 14, 2024
- ezcoo
Table of Contents
EZCOO EZ-SP12H2 HDMI Splitter 1X2 Dolby Vision HDR
OVERVIEW
EZ-SP12H2 is a Mini 1×2 splitter for HDMI with Ultra HD 4K support. This splitter reliably distributes one HDMI source signal to two HDMI outputs. Especially when you have one 4K TV and one 1080P TV, both HDMI outputs can downscale to 1080P if you have 4K source. It supports HDMI 2.0 specification features including data rates up to 4K@60Hz 4:4:4 8 bit, HDR and HDCP2.2, Deep Color, 3D, Lip Sync, and HD lossless Audio/Video formats. It is an ideal choice for applications that require the distribution of an HDMI source signal to multiple outputs.
FEATURES
- Distributes one HDMI source signal to two HDMI displays.
- It supports 4K and 1080P output simultaneously.
- Support HDMI2.0 4K@60Hz 4:4:4 8bit HDR and HDCP 2.2.
- Support both HDMI outputs down scaler to 1080p.
- Support EDID management, 4K/ 1080P/ learning from OUTPUT 1.
- Support 3D, Support deep color 30bit, 36bit.
- Support Blue-Ray 24/50/60fs/HD-DVDIxvYCC.
- Dolby Digital Audio format, HDMI ports support Dolby Digital 7.1CH Audio.
PRODUCT DIAGRAM
Package Accessories
- HDMI Splitter x1
- Type-C cable x1
- User Manual ×1
- Pin key for the pinhole x1
INSTALLATION
- Connect one cable from HDMI source devices to HDMI Splitter input.
- Connect one cable from each display (monitor or projector) to the HDMI Splitter outputs.
- Power on HDMI Splitter by Type-C cable. We can connect to any active device with a USB port. Such as Blu-Rayplayer, or phone charging adaptor.
INSTRUCTION
SPECIFICATIONS
USING TIPS
- Re-powering and unplugging the HDMI cable is a common troubleshooting method.
- Hold 5 seconds till the input LED blink 3 times as RESET, to solve the picture flash/black issue.
- Please use a qualified or brand-new HDMI 2.0 standard cable less than 3 meters.
- Only support down-scale 4K to 1080p. Does not support another resolution.
- Does not support 4K 60hz & 1080p 120hz work in sync.
- Does not support ARC, eARC, CEC, VRR, 4K 120Hz; Not for Sonos ARC.
- Does not EXTEND screen, only Copy/ Mirror.
NOTES
Please use this machine based on the below instructions to keep a longer
lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, and fall.
- Touching the device with wet hands is prohibited.
- Please turn the power off when the machine is not used for a long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before power on, please check the connection cable carefully.
And make sure that all interfaces are normally connected.
DISCLAIMERS
- The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties that may result from its use.
- EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document.
- EZCOO TECHNOLOGY INC. also does not commit to updating or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.
CONTACTS
- When you need any technical assistance, please send an e-mail to support@easycoolav.com.
- Visit to learn more. https://www.easycoolav.com.
EZCOO TECHNOLOGY INC
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>