Front Runner KRAE001T Slimline II Roof Rail Rack Kit Instruction Manual
- May 15, 2024
- Front Runner
Table of Contents
Front Runner KRAE001T Slimline II Roof Rail Rack Kit
Specifications
- Product: Front Runner AUDI E-TRON (2020-CURRENT) SLIMLINE II ENG ROOF RAIL RACK KIT
- Model: KRAE001T
- Size: 1255mm (W) x 1358mm (L)
- Includes: Slimline II Tray, Spacer Pair, Grab On Feet Pair,Outer Grip Pair, Inner Grip Pair, Wind Deflector
Product Usage Instructions
Getting Organized
Before starting the installation process, ensure you have all the components and tools ready:
- Slimline II Tray
- Spacer Pair
- Grab On Feet Pair
- Outer Grip Pair
- Inner Grip Pair
- Wind Deflector
Tools Needed:
- 5mm wrench
- 13mm wrench
Assembly and Installation:
Follow these steps to assemble and install your Front Runner Roof Rail Rack
Kit:
- Refer to the assembly instructions provided with the kit for guidance on mounting system assembly.
- Attach the Slimline II Tray to the mounting system using the provided Spacer Pair and hardware.
- Secure the Grab On Feet Pair to the tray to ensure stability.
- Install the Outer Grip Pair and Inner Grip Pair as per the instructions to secure the load on the rack.
- Attach the Wind Deflector to reduce wind noise and improve aerodynamics.
FAQ:
Q: What should I do if I have questions about the installation process?
A: If you have any questions or need assistance with installingthe
product, please contact Front Runner for guidance to avoid any potential
warranty issues.
Don’t be a hero and muscle through this installation without reading these
fitting instructions first! Improper installation of this gear may void
certain aspects of your warranty.
Before you begin, take a moment and open all your Front Runner rack kit boxes
and gather the assembly instructions for the various components.
A complete kit will contain:
- A Front Runner Mounting System specific to your vehicle
- A Front Runner Rack Tray or Load Bar Slats
This document will guide you through the assembly of the mounting system and
assist you in fitting the roof rack tray or load bars to your specific
vehicle.
Please refer to the next page for a list of all the components, quantities and
tools required.
IMPORTANT WARNING
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INST ALLATION PROCEDURES, YOU SHOULD HA VE THE PRODUCT INST ALLED BY A PROFESSIONAL INST ALLER OR O THER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the
failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this
product.
GET ORGANIZED
IN THE BOX
FIGURE 1.1
TOOLS NEEDED
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
AUDI E-TRON (2020-CURRENT) SLIMLINE II
ROOF RAIL RACK KIT