R V R BRAVO-TX Broadcast Systems Radio Links User Manual
- June 13, 2024
- R V R
Table of Contents
R V R BRAVO-TX Broadcast Systems Radio Links User Manual
Radio Bridge Line covering the frequency bands from 200 MHz to 2.5 GHz and various optional accessories.
ORDERING INFORMATION
Model | Description |
---|---|
BRAVO-TX | Radio Link TX from 200 MHz to 2.5 GHz in step of 20 MHz. Please |
specify the operating frequency at the order.
BRAVO-TX-GHZ| 10W Radio Link Transmitter 1,3 – 2,5 GHz (sub-band £5MHz).
Please specify the operating frequency at the order.
BRAVO-TX/20| 20W Radio Link Transmitter 200-960MHZ (sub-band +10MHz). Please
specify the operating frequency at the order.
BRAVO-TX/30| 30W Radio Link Transmitter 200-960MHZ (sub-band +10MHz). Please
specify the operating frequency at the order.
OPTION
[RDS-BRAVO-TX | RDS built-in. Option for BRAVO TX Series. |
---|---|
/SC-BRAVO-TX | Stereo decoder card. Option for BRAVO RX Series. |
ORDERING INFORMATION
Model | Description |
---|---|
BRAVO-RX | Radio Link RX 200 MHz to 2.5 GHz. Please specify the operating |
frequency at the order.
RADIO LINKS SYSTEM
BRAVO-TX
Radio Links.
BRAVO-RX
Radio Links.
BRAVO-TX-Hi-Band
Radio Links.
BRAVO-RX-Hi-Band
Radio Links.
BRAVO-TX
Parameters | Value | Notes | |
---|---|---|---|
Frequency Range: | 200~960 MHz <20MHz | Sub-band | |
Type of Modulation | FM Class F3 | ||
VCO Tuning | MHz | 25 | |
Frequency Stability | ppm | ± 2,5 | (Better 0n request) |
Synthesizer Step | KHz | 25 | |
Power Output | 10W or 20W (-H) | ||
Spurious Emission | < -80 dB or better | ||
Harmonic Emission | dB | < -65 | (-80 dB on request) |
Stereo Separation | > 55 dB @ 1 KHz | ||
Distorsion | < 0.2% (TYP 00.8 %) @ 1KHz) | ||
Base Band | 30 Hz – 60 KHz within 0.15 dB | ||
Unweighted S/N Ratio | > 72 dB rms at 30 Hz ~ 20 KHz | ||
Enphasis | µS | 50 or 75 | Selectable |
RF Connectors | ohm | N-F 50 | |
Input Base Band Imp. | Kohm | 2 | |
Input Mono Impedence | Ohm | 600 | |
Cooling | Forced air | ||
OP. Temperature Range | 0 ÷ +50°C | ||
Maximum Umidity | % | 90 | |
AC Supply | 100 ÷ 240 Volt; 47 ÷ 63 Hz | ||
Dimension | 1 Units Rack 19″ 44 cm Depth | ||
Weight | Kg | 6.8 |
BRAVO-RX
Parameters | Value | Notes | |
---|---|---|---|
Frequency Range: | 200~960 MHz <20MHz | Sub-band | |
Type of Modulation | FM Class F3 | ||
VCO Tuning | MHz | 25 | |
Frequency Stability | ppm | ± 2,5 | (Better 0n request) |
Synthesizer Step | KHz | 25 | |
Image Rejection | 60dB Typ. | ||
RN Noise Figure | 6dB or lower | ||
Stereo Separation | dB | > 45 dB @ 1 KHx | |
Distorsion | < 0.5% (TYP 0.2 % @ 1KHz) | ||
Base Band | 30 Hz – 60 KHz within 0.08 dB | ||
S/N Ratio | > 72 dB with 0.2 mV input (Typ 78 dB) | ||
Deenphasis | 50 or 75 µS int. | Selectable | |
RF Connectors | µS | N-F 50 ohm | |
B. Band-IF Conn. | ohm | BNC-F | |
Base-Band Imp. | ohm | < 30 | |
Cooling | Forced air | ||
P. Temp. Range | 0 ÷ +50°C | ||
Maximum Umidity | % | 90 | |
AC Supply | 100 ÷ 240 Volt; 47 ÷ 63 Hz | ||
Dimension | 1 Units Rack 19″ 44 cm Depth | ||
Weight | Kg | 6.2 |
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
BRAVO-TX-Hi -Band
Parameters | Value | Notes | |
---|---|---|---|
Frequency Range: | 1.4~2.5 GHz <10MHz | Sub-band | |
Type of Modulation | FM Class F3 | ||
Frequency Stability | ppm | ± 2,5 | (Better 0n request) |
Synthesizer Step | KHz | 50 | |
Power Output | 5W or 10W (-H) | ||
Spurious Emission | < -80 dB or better | ||
Harmonic Emission | dB | < -65 | (-80 dB on request) |
Stereo Separation | > 55 dB @ 1 KHz | ||
Distorsion | < 0.2% (TYP 00.8 %) @ 1KHz) | ||
Base Band | 30 Hz – 60 KHz within 0.15 dB | ||
Unweighted S/N Ratio | > 74 dB rms at 30 Hz ~ 20 KHz | ||
Preemphasis | µS | 0 or 50 or 75 | Selectable |
RF Connectors | ohm | N-F 50 | |
Input Base Band Imp. | Kohm | 2 | |
Input Mono Impedence | Ohm | 600 | |
Cooling | Forced air | ||
OP. Temperature Range | 0 ÷ +50°C | ||
Maximum Umidity | % | 90 | |
AC Supply | 100 ÷ 240 Volt; 47 ÷ 63 Hz | ||
Dimension | 1 Units Rack 19″ 44 cm Depth | ||
Weight | Kg | 6.8 |
BRAVO-TX-Hi -Band
Parameters | Value | Notes | |
---|---|---|---|
Frequency Range: | 1.4 – 2.5 GHz | Sub-band | |
Type of Modulation | FM Class F3 | ||
Frequency Stability | ppm | ± 2,5 | (Better 0n request) |
Synthesizer Step | KHz | 50 | |
Image Rejection | 60dB Typ. | ||
RN Noise Figure | 6dB or lower | ||
Stereo Separation | dB | > 45 dB @ 1 KHx | |
Distorsion | < 0.5% (TYP 0.2 % @ 1KHz) | ||
Base Band | 30 Hz – 60 KHz within 0.08 dB | ||
S/N Ratio | > 72 dB with 0.2 mV input (Typ 78 dB) | ||
Deenphasis | 50 or 75 µS int. | Selectable | |
RF Connectors | µS | N-F 50 ohm | |
Base-Band Imp. | ohm | < 30 | |
Cooling | Forced air | ||
P. Temp. Range | 0 ÷ +50°C | ||
Maximum Umidity | % | 90 | |
AC Supply | 100 ÷ 240 Volt; 47 ÷ 63 Hz | ||
Dimension | 1 Units Rack 19″ 44 cm Depth | ||
Weight | Kg | 6.2 |
R.V.R. Elettronica S.r.l.
Via del Fonditore, 2/2c
40138 Bologna Italy
Phone : +39 0516010506
Fax : +39 0516011104
sales@rvr.it – www.rvr.it
Member of CISQ Federation
CERTIFIED MANAGEMENT SYSTEM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>