R V R PJ300C-LCD Solid State Amplifiers Owner’s Manual
- June 13, 2024
- R V R
Table of Contents
R V R PJ300C-LCD Solid State Amplifiers
Product Information
| Product Name | RVR PJ-C Solid State Amplifiers |
|---|---|
| Model Options | PJ300C-LCD, PJ500C-LCD, PJ700C-LCD, PJ1000LIGHT |
| Primary Application | RVR PJ-C amplifiers offer uncompromised amplification |
power at
a very attractive price. Ideal for small to medium power stations.
Adjustable power output from 0 to maximum output power.
Amplifier Features| High-gain amplifiers with very low input drive power
requirement are used in the PJ300C-LCD. Elevated-gain amplifiers
with very low input drive power requirement are used in the
PJ500C-LCD, PJ700C-LCD, and PJ1000LIGHT.
Hardware Features| RVR PJ-C amplifiers are extremely compact and rugged thanks
to
the stainless steel chassis. The PJ300C-LCD is 2RU high, and the
PJ500C-LCD, PJ700C-LCD, and PJ1000LIGHT are only 3RU high.
User-Friendly Features| Universal 80-260VAC multi-voltage power supply enables
operation on different mains voltages with no need to pre-select
voltage. Pushbuttons for user/device interaction provides enhanced
accessibility and control, resulting in extreme ease of use.
Configuration software offers a simple, intuitive, human
interface.
Operating Efficiency| RVR PJ-C amplifiers incorporate a PFC (Power Factor
Corrector)
power supply that provides the utmost power efficiency for enhanced
energy savings and environmental protection.
Ease of Maintenance| Advanced module design ensures easy accessibility and
maintenance.
Reliability/Continuity| SMD technology used in manufacturing the PJ-C series
ensures
enhanced reliability and uninterrupted performance. APC (Automatic
Power Control) and Fold-back protection ensure reliable operation
under any operating conditions.
Interface Control| Total microprocessor control, easily programmable from
panel
menu or via RS232 with all key parameters displayed on the front
panel LCD display.
Remote Control| Built-in Telemetry System with GSM modem, battery, and battery
charger (optional; must be factory ordered).
Regulatory Compliance| State-of-the-art technology and design results in
equipment
that is in full compliance with FCC, CCIR, and EC standards.
Product Usage Instructions
To use the RVR PJ-C Solid State Amplifiers, please follow the instructions below:
- Ensure that the amplifier is connected to a suitable power source within the voltage range of 80-260VAC.
- Connect the input drive power source to the appropriate input port of the amplifier.
- Using the pushbuttons on the front panel or via RS232 connection, access the microprocessor control interface.
- From the interface, you can program and adjust key parameters such as power output and gain.
- All key parameters will be displayed on the LCD display located on the front panel of the amplifier.
- Adjust the power output from 0 to the desired maximum output power according to your requirements.
- For maintenance purposes, if needed, access the advanced module design for easy accessibility.
- The amplifier incorporates APC (Automatic Power Control) and Fold-back protection for reliable operation under any operating conditions.
Features
- PRIMARY APPLICATION: RVR PJ-C amplifiers offer uncompromised amplification power at a very attractive price. Ideal for small to medium power stations. Adjustable power output from 0 to maximum output power.
- AMPLIFIER FEATURES: high-gain amplifiers with very low input drive power requirement are used in the PJ300C-LCD. Elevated-gain amplifiers with very low input drive power requirement are used in the PJ500C-LCD, PJ700C-LCD and PJ1000LIGHT.
- HARDWARE FEATURES: RVR PJ-C amplifiers are extremely compact and rugged thanks to the stainless steel chassis. The PJ300C-LCD is 2RU high, and the PJ500C-LCD, PJ700C-LCD, and PJ1000LIGHT are only 3RU high.
- USER-FRIENDLY FEATURES: universal 80-260VAC multi-voltage power supply enables operation on different mains voltages with no need to pre-select voltage. Pushbuttons for user/device interaction provides enhanced accessibility and control, resulting in extreme ease of use. Configuration software offers a simple, intuitive, human interface.
- OPERATING EFFICIENCY: RVR PJ-C amplifiers incorporate a PFC (Power Factor Corrector) power supply that provides the utmost power efficiency for enhanced energy savings and environmental protection.
- EASE OF MAINTENANCE: advanced module design ensures easy accessability and maintenance.
- RELIABILITY/CONTINUITY: SMD technology used in manufacturing the PJ-C series ensures enhanced reliability and uninterrupted performance. APC (Automatic Power Control) and Fold-back protection ensure reliable operation under any operating conditions.
- INTERFACE CONTROL: total microprocessor control, easily pro grammed from panel menu or via RS232 with all key parameters displayed on the front panel LCD display.
- REMOTE CONTROL: built-in Telemetry System with GSM modem, battery and battery charger (optional; must be factory ordered).
- REGULATORY COMPLIANCE: state-of-the-art technology and design results in equipment that is in full compliance with FCC, CCIR, and EC standards.
FM Mosfet Amplifiers 87,5 – 108 MHz
Technical specifications
| Parameters | Values | Values |
|---|
GENERALS
Rated output power| 300W| 500W
Frequency range| FCC -CCIR and other on request
Input power for rated output| 10 W
Primary Power| 80 ÷ 260 Vac
AC Power Consumption| 540 VA / 500W / PF: 0,93| 920 VA / 900 W / PF: 0,98
Overall efficiency| 60%| 55%
Phisical Dimensions (W x H x D)| 483 x 88 x 394 mm| 483 x 132 x 520 mm
Weight| 9 kg| 23 kg
Environmental Working Conditions| -10 ÷ +50 °C / 95% relative Humidity non
condensing
Cooling| Forced, with internal fans
CONNECTORS
RF Input| N (50 ohm)
RF Output| N (50 ohm)
RF Monitor| BNC (- 60dBr referred to RF output )
Interlock Output| BNC
Interlock Input| BNC
STANDARD COMPLIANCE
Safety| EN 60215:1989
EN60215/A1:1992-07 EN60215/A2:1994-09
EMC| EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-11 V1.2.1 (2002-11)
- All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice.
- These are general specifications. They show typical values and are subject to change without notice.
PJ700C-LCD / PJ1000LIGHT
| Value | Value |
|---|
700W| 1000W
FCC -CCIR and other on request
12W| 11W
80 ÷ 260 Vac| 230VAC ±15% or 115VAC ±15%
1215 VA / 1190 W / PF:0,98| 1650 VA / 1617 W / PF: 0,98
59%| 62%
483 x 132 x 520 mm
23 kg
-10 ÷ +50 °C / 95% relative Humidity non condensing
Forced, with internal fans
N (50 ohm)
N (50 ohm)| 7/16″ EIA flange type, 50 ohm
BNC (- 60dBr referred to RF output )
BNC
BNC
EN 60215:1989 EN60215/A1:1992-07
EN60215/A2:1994-09
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-11 V1.2.1 (2002-11)
Ordering information
Options for PJC-LCD
Code /Description
- CNT7/8-150: 7/8″ output RF connector. Available for model PJ1000LIGHT
Contact
RVR Elettronica S.p.A.
- Via del Fonditore, 2/2c
- Zona Industriale Roveri • 40138 Bologna • Italy
- Phone: +39 051 6010506
- Fax: +39 051 6011104
- e-mail: info@rvr.it
- web: http://www.rvr.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>