Milesight VS350 Passage People Counter Owner’s Manual
- June 13, 2024
- Milesight
Table of Contents
Passage People Counter
Featuring LoRaWAN®
VS350
VS350 Passage People Counter
The VS350 is an exceptional indoor passage people counter that detects and
analyzes the flow of people, allowing for optimum space management and usage.
Equipped with dual PIR sensors, it offers a high accuracy rate for bi-
directional people counting.
When combined with the additional temperature sensor, the VS350 can achieve
even more potential triggers, increasing its detection capabilities. As a
Milesight D2D controller, the VS350 seamlessly communicates with other
Milesight D2D devices, establishing more possible connections and paving the
way for smoother operations.
With easy configuration and wireless detection, the VS350 facilitates simple
deployment and connectivity. Compliant with the Milesight LoRaWAN gateway and
Milesight IoT Cloud solution, users can know the number of passage people and
trigger other sensors or appliances easily via a webpage or mobile App
remotely.
Features
- Provide good accuracy rate for bi-directional people counting with dual PIR sensors
- Support bi-directional people counting with dual PIR sensors
- Ultra-low power consumption with up to 4-year battery life without replacement
- 100% anonymity and GDPR-compliant without image capturing, free from privacy concerns
- Equipped with a reliable and cost-effective sensor system for counting people through passages
- Function well with people counting with perfect-fit detecting ranges
- Wireless connectivity and convenient size improve the accessibility and simplicity of deployment
- Built-in temperature sensor, enabling environmental detection
- Store locally 1,000 historical records and support retransmission to prevent data loss
- Support Milesight D2D protocol to enable ultra-low latency and directly control without gateways
- Equipped with NFC for one touch configuration and support card emulation mode
- Function well with standard LoRaWAN® gateways and network servers
- Compatible with Milesight IoT Cloud.
Specifications
Measurement
People Counting
Technology| Dual PIR
Detection Range| Width = 2m ( At the height of 3m)
Installation Height| ≤ 3.0m
Suggested| +15 °C to +32 °C
Temperature1| Support
Temperature
Range| -30°C ~ 70°C
Accuracy| +/- 0.5°C
Wireless Transmission
Protocol| ®
LoRaWAN
, Milesight D2D
Frequency| CN470/IN865/RU864/EU868/US915/AU915/KR920/AS923-1&2&3&4
Tx Power| 16 dBm (868 MHz)/19 dBm (470 MHz)/22 dBm (915 MHz)
Sensitivity| -137dBm
Mode| OTAA/ABP Class A
Others
LED| 1 × RGB LED Indicator
Button| 1 × Reset Button
Configuration| NFC Configuration via Mobile App
Advanced Feature| Data Storage, Data Retransmission, Milesight D2D Controller
Physical Characteristics
Power Supply| 2 x 2700 mAh ER14505 Li-SOCl2 Replaceable Batteries
Battery Life2| Around 4 Years (10-min Interval, 25°C, 1000 People per day )
Operating Temperature| -20°C ~ +60°C
Relative Humidity| 0% – 95% (Non-condensing)
Ingress Protection| IP30
Dimension| 100 x 70 x 21 mm ( 3.94 x 2.76 x 0.83in)
Material & Color| ABS + PC (Flame Retardant), White
Installation| Ceiling Mount
1PIR probes are very sensitive to temperature and are most effective within
the temperature range of +15 to +32 °C
2Tested under laboratory conditions and for guideline purposes only.
FCC Caution
§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>