WS101 Milesight iBox Smart Building Kit Installation Guide
- June 1, 2024
- Milesight
Table of Contents
WS101 Milesight iBox Smart Building Kit
Device List
| Quantity | Item | Description | Applications |
|---|---|---|---|
| 1 | WS101 Smart Button | WS101 smart button supports sending different alerts |
depending on various press actions and can be used in emergency alarm system, remote control or other remote push button applications.|
- Easy to be carried out by the seniors and the disabled or to be installed anywhere
- Remote control lights or curtains
in office
1| WS301Magnetic Contact Switch
| WS301 sensor uses a magnet to detect the open/closed status of door/window
or something has been moved. It’s wire -free and can be easily mounted on the
doors, panes, cabinets, etc.|
- Entry/fire door monitoring
- Asset protection in the cabinets or boxes
- Suitable for offices, homes or factories applications
1| AM103 IAQ Sensor
| AM103 is a 3-in-1 ambience monitoring sensor including the measurement of
temperature, humidity and CO2 concentration and can display indoor status
visually on the E-ink screen in real-time and transmit to network server using
LoRaWAN technology.|
-
Monitor temperature, humidity
and CO2 levels -
Indicate CO2 levels via traffic
light or emoticon on the E-ink screen -
Suitable for office or school indoor air quality monitoring
1| EM300-SLD Leak Detection Sensor
| EM300-SLD sensor can detect the presence of liquids by a small probe based
on the conductive principle. Besides, EM300-SLD equips temperature and
humidity sensors to monitor the indoor and outdoor environment.|
- Pipe leak monitoring
- Basement flooding detection
- Machine room monitoring
1| UC300 IoT Controller
| UC300 IoT controller equips with multiple data interfaces including digital
inputs, relay outputs, RS232, RS485, analog inputs and PT100 RTD input, which
can convert legacy sensors to work with LoRaWAN network and control devices.|
-
Acquire data from legacy
sensors and send via
LoRaWAN networks -
Control the on/off status via
relay outputs or RS485
Modbus commands
1| UG65 Semi-Industrial LoRaWAN Gateway
| UG65 semi-
industrial indoor LoRaWAN gateway provides stable connectivity between sensors
and mainstream network servers or Milesight IoT cloud.|
-
Collect data from LoRaWAN
sensors -
Forward data to Milesight IoT
Cloud or mainstream network
servers via Ethernet or Wi-Fi
| 1 Year (Pro1) Milesight IoT Cloud
| Milesight IoT Cloud provides unparalleled levels of vertical integration
with Milesight LoRaWAN gateways and sensors. It visualizes field data and
enables user to monitor and control remote assets on an intuitive dashboard.|
-
Drag & Drop dashboard to
display data -
Real-time alarm notifications
-
Exportable historical data and
generate reports -
Custom trigger conditions &
actions to enable collaborative
interaction among end-devices -
Android & iOS versions available
Packing List
Item| AM103| WS101| WS301| EM300-SLD| UC300|
UG65
---|---|---|---|---|---|---
Device|
●
|
●
|
●
|
●
|
●
|
●
Ethernet Cable| | | | | |
●
LoRa Antenna| | | | |
●
|
●
ER14505 Li-SoCl2 Batteries|
●
| | | | |
3M Double-Sided Tape|
●
|
●
| |
●
| |
Wall Mounting Kits|
●
|
●
| |
●
|
●
|
●
Fixing Screws|
●
| |
●
|
●
|
●
|
●
Screw Caps| | | |
●
| |
DIN Rail Clip| | | | |
●
|
Mounting Bracket| | | | | |
●
Terminal Blocks| | | | |
●
|
Power Adapter| | | | |
●
|
●
Warranty Card| ●
Registration and Activation
-
Open web browser, navigate to cloud.milesight-iot.com to register a Milesight IoT Cloud account. You can also install Milesight IoT Cloud App from Google Play or App store.
-
Activate the account to pro 1 plan by entering the activation code on the web GUI. You can contact your sales representative to get the activation code.
Setting-up the Gateway
- Power on the UG65 via power adapter or PoE.
- Access the web GUI and configure the network setting to get Internet connection.
Username: admin
Password: password
Method 1:
-
Search and connect the Wi-Fi SSID of gateway (Gateway_**), then open the browser
and type 192.168.1.1 to log in the web GUI. -
Select the Connection Type of Ethernet port and fill in the IP information, then connect
UG65 gateway Ethernet port to network devices like a router or a modem to get Internet
access.
Method 2:
-
Connect the UG65 to PC via Ethernet port and configure the IP address of computer to the same subnet with the UG65 manually (e.g. 192.168.23.200).
-
Type 192.168.23.150 into the browser on PC to log in the web GUI of UG65 gateway.
-
Connect UG65 to another Wi-Fi access point to get network connection and set wlanO as main interface.
-
Enable the network server and Milesight IoT Cloud mode.
-
Fill in the device SN to add gateway and ensure the gateway is online. You can also enter the SN manually on the Cloud App to add the gateway.
Setting-up the Sensors
-
Pull out the battery insulating sheet to power on WS series sensors and install the batteries onto AM103 device.
-
Use an NFC-enabled smart phone to install Milesight Tool Box App from Google Play or App store, place the NFC area of phone close to the device and use Milesight Tool Box App to read and configure the device.
-
WS101
-
AM103
-
WS301
-
EM300-SLD
-
Milesight Tool Box App:
|
---|---
3. Fill in the device SN to add sensors on Milesight IoT Cloud page. You can also use Cloud App to scan the QR code on the label of device to add, or fill in the device SN manually to add sensors.
After devices are getting online, you can view the data on the cloud.
- Fix sensors to the wall via 3M tapes or wall mounting kits. For EM300-SLD, the leak probe can be fixed to the wall via double-sided tape.
Fixed by 3M Tapes:
Fixed by Screw:
-
WS101
-
WS301
-
AM103
-
EM300-SLD
Setting-up UC300 IoT Controller
- Connect the sensors to corresponding data interfaces of UC300 and install LoRa antenna.
- Power on UC300 via power adapter and connect the type-C port to PC, use Tool Box software downloaded from Milesight website to configure the device and test if it can read sensor data.
- Fill in the device SN to add sensors on Milesight IoT Cloud page. You can also use Cloud App to scan the QR code on the label of device to add, or fill in the device SN manually to add the controller.
- After device is getting online, enable the corresponding data interfaces displayed on the cloud page.
- Install the controller to the wall via wall mounting kits or hang it to the DIN rail.
Wall Mounting:
DIN Rail Mounting:
|
---|---
CUSTOMER SUPPORT
Thank you
for choosing
Milesight Product
Milesight IoT Co., Ltd.
www.milesight-iot.com
All software & files can be downloaded from
https://www.milesight-iot.com/documents-download/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>