Aerpro G9200HD HD 1080P Inspection Camera User Manual
- June 13, 2024
- Aerpro
Table of Contents
Aerpro G9200HD HD 1080P Inspection Camera
Product Information
The GHD Articulating Borescope is an HD 1080P Inspection Camera designed for various applications. It features a 4.3 Inch LCD IPS screen for clear viewing, a flexible snake tube for easy maneuverability, and a borescope head with LED lights for illumination. The borescope also has a Micro SD card slot (supports up to 32GB, not included) for storing pictures and videos.
Product Features
- Micro SD card required (not included)
- Battery installation
- Power On/Off
- LED Light Adjustment
- Settings menu
- Picture Mode
- Video Recording Mode
- Viewing Recorded Videos and Pictures
Icon Display Information
- SD card:
- No SD card
- With SD card
- LED light:
- Level 1
- Level 2
- Rechargeable Battery:
- Level 3
- Level 4 (Turn off)
- Power 25%
- Power 50%
- Power 75%
- Full
- Battery Runs Out Charge Immediately
- Charging
Product Usage Instructions
Battery Installation
Before using the Borescope, fully charge it for 1 hour. Follow these steps to install the battery:
- Unscrew the handle battery screw cover and take out the 18650 battery.
- Pay special attention to the positive and negative poles of the 18650 battery. These correspond to the positive and negative poles on the Borescope’s handle.
- Once correctly positioned, replace the cover and screw to secure.
Using your Borescope
Power On/Off
To turn on the Borescope, press and hold the button on the side of the monitor. The handle and monitor screen indicator will light up green and blue. Press and hold the button again to turn off the Borescope.
LED Light Adjustment
After powering on, you can adjust the brightness of the LED lights or turn them off by pressing the button repeatedly.
Settings
Press the button to enter the settings menu. Use the Up or Down arrows to navigate through the settings. Press the button to confirm selections and the button to exit the settings menu. The available settings include Resolution, Date & Label, Automatic shutdown, Date & Time, Language settings, Brightness, Image effects, Ruler, TV mode, Recording (Microphone), Temperature system, Format, Default settings, and Version.
Picture Mode
In picture mode, the icon appears on the top left of the screen. To take a picture, press the button or the button on the handle. The picture will be saved to the Memory Card, and a “Saved successfully” message will appear on the screen to confirm.
Video Recording Mode
To enter video recording mode, press and hold the button. The icon appears on the top left of the screen, and a red flashing circle with a counter will appear to indicate recording. To stop recording, press the button to exit back to picture mode.
Viewing Recorded Videos and Pictures
To view recorded videos and pictures, press and hold the button. The playback icon appears on the top left of the screen. Use the Up or Down arrows to navigate through video and picture files. Press the button or the button on the handle to play the recorded video file. Use the button or the button on the handle to pause. Use the button to fast forward and the button to rewind. There are 3 speeds for fast forward and rewind. Press the button to return to normal speed.
ARTICULATING BORESCOPE
HD 1080P Inspection Camera
Introduction
Please read this manual carefully before using the Borescope and follow herein
instructions to avoid damage caused by improper use.
- Micro SD card slot
- AV Out (cable not included)
- Type C charging interface
- Power ON/OFF
- 4.3 Inch LCD IPS screen
- UP/TV button
- Settings/Playback button
- Down/Rotate view button
- Confirm/Take picture button
- Borescope head articulation rotating wheel
- Photo/Video button
- Light ON/OFF button
- Flexible snake tube
- Borescope head
Icon display information
Product features
- 4.3 Inch LCD colour display
- 1920*1080P Photo/Video resolution
- 8.5mm Camera lens diameter
- 1 Metre snake tube length
- 2 Mega pixel photo images*
- 20-100mm Depth of field
- 80° Wide angle
- 1/6” CMOS sensor
- Dimmable LED light
- 180° Rotating head
- 2600mAh Rechargeable battery
- Multi-language
- Video recording*
- Micro SD card required, not included. Supports up to 32GB.
Battery installation
NOTE: Before use and after storing the Borescope fully charge for 1 hour.
-
Unscrew the handle battery screw cover and take out the 18650 battery.
-
Please pay special attention to the positive and negative poles of the 18650 battery.
These correspond to the positive and negative poles on the Borescopes handle. -
Once correctly positioned, replace the cover and screw to secure.
Using your Borescope
Power On/Off
- Press and hold the button on the side of the monitor to turn the borescope ON. The handle and monitor screen indicator light up green and blue. Press and hold the button again to turn theborescope OFF
LED Light Adjustment
After powering ON, the LED lights brightness can be adjusted or turned OFF by
pressing the button repeatably.
Settings
Press the button to enter the settings menu for the borescope. Press the Up or
Down arrows to navigate through the settings. Press the button to confirm
selections. Press the button to exit the settings menu.
Settings are Resolution, Date & Label, Automatic shutdown, Date & Time, Language settings, Brightness, Image effects, Ruler, TV mode, Recording (Microphone), Temperature system, Format, Default settings and Version.
Picture Mode
When in picture mode this icon appears on the top left of the screen. To take a picture press the button or the button on the handle and the picture will be saved to the Memory Card. A “Savedsuccessfully” message will appear on screen to confirm.
Video Recording Mode
Press and hold the button to enter into video recording mode. This icon
appears on the top left of the screen. Then a red flashing circle with a
counter appears and recording will commence. To stop recoding press the button
to exit back to picture mode.
Viewing Recorded Videos and Pictures
- Press and hold the button, the playback icon appears on the top left of the screen.
- Press the UP or Down arrows to navigate through video and pictures files.
- Press the button or the button on the handle to play the recorded video file.
- Press the button or the button on the handle to pause. Press the button to fast forward,
- Press the button to rewind. There are 3 speeds for fast forward and rewind.
- Press the button to return to normal speed.
Deleting, protecting & slideshow for Recorded Videos and Pictures
When viewing recorded video or pictures, press the button to select delete,
protect or play a slideshow of recorded files.
Notice and cautions
- Please do not use the product in areas where it may be exposed to any electrical objects, as the exposed metal parts can be electrically conductive and may cause unexpected accidents.
- Please do not allow minors to operate this endoscope.
- Please do not allow the use of the borescope for medical, human or animal testing.
- Please keep the product clean, avoid exposure to the sun, or direct contact with water, oil and corrosive liquids.
- The whole machine is not waterproof, the snake cable and borescope head are IP68 waterproof.
- Please use the supplied USB cable for charging.
Specifications
| Camera Lens Diameter | 8.5mm |
|---|---|
| Snake Tube Length | 1 metre |
| Pixels | 2 Mega Pixel |
| Depth of Field | 20-100mm |
| Field Of View | 80° |
| LED Lamp Beads Quantity | 10 LED lights |
| Sensor | 1/6” CMOS |
| Photo/Video Resolution | 1920*1080P |
| Manual Dimming | Support |
| Rotation Angle | ≥180° in both directions |
| Snake Tube Material | Flexible Metal Tube |
| Battery Type | 2600mAh Polymer Lithium Battery |
| APP Language | Supports multiple languages |
| Micro SD Card (not included) | Supports up to 32MB |
Troubleshooting
| Fault | Root Cause | Measure |
|---|
Unable to Power-on
|
1.Flat Battery 2.Incorrect Installation
| 1. Please recharge or replace the battery
2. Please check the battery and battery compartment contact if it is dirty or deformed, then reinstall the battery (refer to page 2 of manual)
Auto Power-off| Low Battery| Please recharge or replace the battery
Boot screen stuck
|
1.Failed to start the system 2.Low Battery
|
1.Reassemble the battery and restart it, then charge it
Image cannot be recorded or found
|
SD card capacity is full
|
1. Replace the SD card or delete unnecessary files
2. Format the SD Card
“SD card error” or “Format” when inserting
|
The position of the card is not inserted correctly
|
1.Clean the SD card contact 2.Reinstall the SD card
Can’t charge
| 1. The charging interface is dirty
2. Damaged charging cable
3. Faulty battery
| 1. Clean the charging interface and re-plug it in
2. Replace the charging cable or charger
3. Replace battery (18650)
Blurry Image
| 1.The camera lens is dirty 2.The camera lens is not within the range of the depth-of-field
3. Damaged lens due to high temperature
4. Damaged lens
| 1. Clean the probe with the lint-free cloth supplied
2. Please place the probe within the depth of field range of 20-100mm 3.Do not place the probe in a high
temperature environment (below 70°C)
4. Contact an authorized repairer
Technical assistance
- If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support Australia
- TEL: 03 – 8587 8898
- FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST
- This manual is considered correct at time of printing but is subject to change. For latest manuals and updates refer to the website.
- AERPRO.COM.