HYTRONIK HBIR29-AA Bluetooth Multi-Directional PIR Sensor Instruction Manual

HBIR29/AA
Installation and Instruction Manual
Multi-Directional PIR Sensor with 5.0 SIG Mesh
DALI Output

Technical Specifications

I max : 80mA
U rated : 15VDC
Sensor principle| PIR detection
Detection range| Installation height : 3m
Max. diameter (Ø) :12m
Detection angle| 360°
Operation temperature| Ta:-15°C~+45°C
IP rating| IP20

Download the App

Free App for set-up and commissioning
Bluetooth 5.0 SIG mesh

https://apps.apple.com/cn/app/koolmesh/id1483721878
https://play.google.com/store/apps/details?id=com.koolmesh.sig

Smartphone app for both iOS & Android platform

https://apps.apple.com/cn/app/koolmesh/id1570378349

Koolmesh Pro app for iPad

http://www.iot.koolmesh.com

Web app/platform: www.iot.koolmesh.com

Installation

Mechanical Structure & Dimensions Wiring Diagram
Note: It is recommended tthat the wiring length be > 100mm for installation convenience.

Detection Pattern

Sensitivity set to maximum, Sensor head angle set to maximum
Installation height: 3m Placement Guide and Typical Range![HYTRONIK HBIR29-AA Bluetooth Multi-Directional PIR Sensor

• parts4](https://manuals.plus/wp-content/uploads/2023/09/HYTRONIK-HBIR29-AA- Bluetooth-Multi-Directional-PIR-Sensor-parts4.jpg) The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
  Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.

Dimming Interface Operation Notes

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

– Recall a scene
– Turn on only
– Quit manual mode
– Turn off only
– Do nothing
Double push| – Turn on only
– Quit manual mode
– Turn off only
– Do nothing
– Recall a scene
Long press (. 1 second)| – Dimming
– Colour tuning
– Do nothing
Sensor-link (VFC signal only)| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Emergency Self-Test Function| Short press (<1 second)

• Short press has to be longer than 0.1s, or it will be invalid.| – Start Self test( Monthly)
  – Start Self test (Annually)
  – Stop Self test
  – Invalid
  Long press (l second)| – Start Self test (Monthly)
  – Start Self test (Annually)
  – Stop Self test
  – Invalid
  Fire Alarm fVFC signal only(| Refer to App User Manual V2.1| – Able to connect the Fire Alarm system
  – Once the fire alarm system is triggered, all the luminaries controlled by the Push Switch will enter the preset scene (normally it’s full on), after the fire alarm system gives the ending signal, all the luminaries controlled by this Push Switch will revert back to normal status.

Additional Information / Documents

1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com ->download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

WWW.HYTRONIK.COM
Subject to change without notice.
HBIR29/AA-20230602-A0

References

• iot.koolmesh.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>