BOYA BCA7 Pro XLR to Lightning and USB-A and Type-C Connectors Microphone Cable User Manual

**BOYA BCA7 Pro XLR to Lightning and USB-A and Type-C Connectors Microphone Cable User Manual

**

Introduction

Thanks for choosing BOYA!

The BOYA BY-BCA7 PRO is an XLR microphone cable with both Lightning connector cable for i0S devices and USB-A connector cable for Windows &Mac PC included.

It offers 24bit & 48kHZ sampling frequency, with integrated pre-amplifier, perfectly connect any XLR dynamic microphone and selfie-powered XLR condenser microphones with 10 devices or Windows & Mac PC, greatly help iPhone, iPad and PC with picking up better sound while recording viog, live stream, interview & film.

It provides a 3.5mm (1/8″) stereo headphone jack for monitoring, 3-Position level control (-20dB,+10dB,+20dB), and 6m (20 ft) length cable that allows for using i variety situations.

• The USB Type-C to Lightning connector cable mainly support below devices:
• iPhone Xs, iPhone X, iPhone 8/8 Plus, iPhone 7/7 Plus, iPhone SE, iPhone 65/65 Plus, iPhone 6/6 Plus, iPhone 5c, iPhone 5s, iPhone 5
• iPad mini 4,iPad mini 3, iPad mini 2, iPad mini, iPad Pro, iPad (2017), iPad Air 2,Pad Air – iPod Nano (7th generation), iPod touch 6, iPod touch 5
• And more The USB Type-C to USB-A connect cable mainly support:
• Windows and Mac PC. The USB Type-C to Type-C connect cable mainly support:
• Most Type-C devices.

Package Contents

• 1X BY-BCA7 Pro XLR microphone cable
• 1X USB Type-C to USB-A connector cable
• 1X USB Type-C to Lightning connector cable
• 1X USB Type-C to Type-C connect cable
• 1X Carrying pouch
• 1X User manual
• Warrant card

Parts Disruption

1. Famale XLR connector
2. 3-Position Pad (-20dB,+10dB, +20dB) 3.3.5mm(1/8″) stereo headphone jack
3. Replaceable USB Type-C to Lightning connector cable
4. Replaceable USB Type-C connector cable 6. Replaceable USB Type-C to USB-A connector cable

How to Use it

1. Connect XLR female terminal with dynamic or self-powered XLR microphone.
2. Connect Lightning connector with i0S equipment
3. Insert earphone to 3.5mm(1/8″) headphone jack f you need to monitor sound.
4. Adjust sound attenuation(-20d8, +10dB, +20dB), depends on how close to sound source.

Connecting

1. Connect XLR female terminal with dynamic or self-powered XLR microphone.
2. Connect USB Type-C connector with Android mobile devices.
3. Insert earphone to 3.5mm(1/8″) headphone jack if you need to monitor sound.
4. Adjust sound attenuation(+20dB, +10dB, -20dB), depends on how close to sound source.

Connecting

1. Connect XLR female terminal with dynamic or self-powered XLR microphone.
2. Connect Lightning connector with Mac or Windows PC.
3. Insert earphone to 3.5mm(1/8″) headphone jack if you need to monitor sound.
4. Adjust sound attenuation(-20dB, +10dB, +20dB), depends on how close to sound source

NOTE:

1. This cable only works with XLR dynamic microphone and XLR battery powered condenser microphone.
2. Before recording an important event, record and play back a short test clip with the microphone to ensure audio recording is functioning properly.

Features

• MFI Lightning connector cable included, connect XLR microphone to iOS devices
• USB-A connector cable included, connect XLR microphones to Mac & Windows PC
• ype-C connector cable included, connect XLR microphones to most Type-C devices
• Integrated pre-amplier
• 3-Position pad(-20dB,+10dB, +20dB)
• Up to 24bit/48kHz -No batteries required
• Includes 3.5mm headphone monitoring jack
• Rugged aluminum construction
• 6m(20ft) length cable

Specifications

USB-A connector
Type-C connector
Weight:| 184g
Cable Length:| 6m

www.boya-mic.com

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd.

TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com/www.jiayz.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>