VERIDIAN JXB-311 Non-Contact Infrared Thermometer User Guide

June 6, 2024
VERIDIAN

VERIDIAN JXB-311 Non-Contact Infrared Thermometer -
LOGO

Non-Contact
Infrared Thermometer
Model JXB-311 / Ref No 09-313

VERIDIAN JXB-311 Non-Contact Infrared Thermometer

These brief instructions allow you to quickly begin using your Infrared Thermometer for Body Temperature Measurements. Please refer to the Instruction Manual for more detailed instructions covering all features of the thermometer, including Object/Surface and Room Temperature measurements.

The infrared technology used in this thermometer is safe and is not harmful in any way. However, we recommend avoiding looking into the lens during use.

VERIDIAN JXB-311 Non-Contact Infrared Thermometer - FIGURE
1

Self-test

The Infrared Thermometer offers a selection of settings for a person, object/surface, and room measurements.

To toggle between modes:

VERIDIAN JXB-311 Non-Contact Infrared Thermometer - FIGURE
2

  1. Press and release the POWER / SCAN button to turn the thermometer on. The unit will run a self-test and all symbols on the display will momentarily appear.
  2. Press and release the MODE button to scroll through and select person, object/surface, and room temperatures.

To measure body temperature using your Infrared Thermometer, follow these steps:

  1. Press and release the POWER / SCAN button to turn the thermometer on. The unit will run a self-test and all symbols on the display will momentarily appear Fig. 1.
    VERIDIAN JXB-311 Non-Contact Infrared Thermometer - FIGURE
3

  2. The display will show dashed lines, the selected mode, and the temperature mode (°F/°C). The thermometer is ready for measurement, Fig. 2.
    VERIDIAN JXB-311 Non-Contact Infrared Thermometer - FIGURE
4

  3. Press and release the POWER / SCAN button while aiming the infrared lens at the individual’s forehead, holding the thermometer approximately 0.5” – 1.0” away.

  4. When the thermometer is in the correct position, it will slightly vibrate, indicating the positioning sensor has detected the ideal reading location and the measurement has been taken.

  5. The results will be displayed, Fig. 3.VERIDIAN JXB-311 Non-Contact Infrared Thermometer - FIGURE 5

  6. If the results are at or above 100.4°F (38°C), the device will vibrate 3 times, indicating a fever may be present.

  7. After approximately 30-seconds of non-use, the thermometer will automatically shut off.

IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING DIFFICULTIES, PLEASE CALL THE TOLL-FREE  CUSTOMER SERVICE HELPLINE FOR FURTHER ASSISTANCE AT 1-866-326-1313.

Distributed by:
Veridian Healthcare 1175 Lakeside Drive Gurnee, IL 60031
www.veridianhealthcare.com
Made in China

93-2162 07/20

©2020 Veridian Healthcare, LLC

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals