BOYA BY-GM18CB Desktop Goooseneck Condenser Microphone Instruction Manual

June 13, 2024
Boya

BOYA BY-GM18CB Desktop Goooseneck Condenser Microphone Instruction Manual
BOYA BY-GM18CB Desktop Goooseneck Condenser Microphone

Introduction

Thanks for choosing

BOYA!BOYA BY-GM18CB is a cardioid condenser gooseneck microphone. It’s an ideal choice for lectures, conferences and meetings.

With excellent cardioid polar pattern, the BY-GM18CB can clearly capture the voice in front of the mic, designed to provide clear and intelligible speech reproduction for lectures, video conferences, meetings, and more.

The BY-GM18CB’s shaft features upper and lower gooseneck sections that enable you to precisely position the capsule in front of the speaker for optimal sound. ON/OFF status is clearly indicated by the LED ring below the mic capsule. The BY-GM18CB can be powered by 2 AAA batteries or XLR 48V Phantom power.

Package Contents

  • 18″ Gooseneck Microphone
  • Microphone Base
  • User Manual
  • Warranty Card

Safety Instructions

  • Please read this user manual carefully and completely before using the product, and keep it for future reference.
  • Warning: improper installation could irreparably damage the unit.
  • Place the unit in a location protected from weather and far from water and moisture.
  • Keep all liquids away from the product. Liquids entering the product can short-circuit the electronics or damage the mechanics.
  • Don’t place this unit close to heat sources (radiators, spotlights, amplifiers etc.)

Introduction

  1. Cardioid microphone capsule
  2. LED Indicator
  3.  18″ XLR dual-section gooseneck
  4. PUSH button
  5. XLR connector
  6. ON/OFF button
  7. Anti-slip foot pad
  8. Battery compartment
  9. Foam windscreen
    Parts Disruption

Operation Guide

  1. Insert 2 AAA batteries into the battery compartment according to the polarity indicated inside the compartment.
    Note: If using phantom power, please skip this step.

  2. Insert the gooseneck connector into microphone base surface XLR connector as shown.

  3. Connect microphone base to an external unit (mixer, amplifer, etc).
    Note: Switch phantom power on if the external unit can offer 48 phantom power.

  4. Press the ON/OFF button and start it up. Two LED indicators will light up at the same time.

  5. Press the ON/OFF button again to turn off the unit. The LED indicators will be off.
    Installation

NOTE: Please press PUSH button to remove
Installation

Features

  • High quality 18″ cardioid condenser gooseneck microphone
  • Deliver clear and intelligible sound
  • Ideal for lectures, video conferences, meetings, etc
  • Flexible dual-section gooseneck enables ease of use and positioning
  • Built-in LED indicators show working status at any time
  • Powered by 1.5V AAA battery or 48V phantom power
  • Foam windscreen included

Specifications

Acoustic Principle Condenser
Polar Pattern Cardioid
Frequency Response 50 — 16,000 Hz
Sensitivity -35±2dB (OdB =1 V/Pa @ 1KHz)
Signal to Noise Ratio 78 dB
Output Connector XLR Connector
Power Requirement AAA Battery *2 / 48V Phantom Power
Operating Time with Battery >168 Hours+ (AAA Battery)
Material ABS+PC
Maximum SPL 110dB SPL
Dimensions Gooseneck Mic:p20x490mm (0.8×19.9″)

Mic Base:141 x 116 x 41mm (5.5×4.5×1.6″)
Microphone Weight| 597g (21 oz)

Graph Diagram

Graph Diagram

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd. TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com / www.jiayz.com

Company Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals