BEGA 50972.1 System Pendant Luminaire LED Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
50 972.1
System pendant luminaire for indoor use
Instructions for use
Application
Pendant luminaire · indoor luminaire with annular metal shield and hand-blown
opal glass for reduced lateral glare and high-contrast lighting by deflected
light predominantly downwards.
BEGA System pendant luminaire for use in combination with various modular BEGA
installation components.
Product description
Metal luminaire housing and ring louvres, finish Colour velvet white Hand-
blown opal glass Black flex suspension 2 × 0,75 @ Overall length of luminaire
approx. 2000 mm Luminaire without canopy, for connection to an additional
required BEGA Installation component (accessory)
Safety class
– Safety mark c – Conformity mark Weight: 1.8 kg
Lamp
Module connected wattage | 17.5 W |
---|---|
Luminaire connected wattage | 20.6 W |
Rated temperature | ta = 25 °C |
Ambient temperature | ta max = 35 °C |
50 972.1 K3
Module designation | LED-0406/930 |
---|---|
Colour temperature | 3000 K |
Colour rendering index | CRI > 90 |
Module luminous flux | 2820 lm |
Luminaire luminous flux | 2035 lm |
Luminaire luminous efficiency | 98,8 lm / W |
50 972.1 K4
Module designation | LED-0406/940 |
---|---|
Colour temperature | 4000 K |
Colour rendering index | CRI > 90 |
Module luminous flux | 2980 lm |
Luminaire luminous flux | 2150 lm |
Luminaire luminous efficiency | 104,4 lm / W |
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Please note:
The luminaire can only be operated with an operating device that fulfills the
requirements according to EN 61347-2-13.
The maximum idle voltage of 60 V DC must conform to SELV or SELV equivalent.
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
To operate this luminaire one of the following additional BEGA Installation
components must be ordered – accessoire.
Please refer to the instructions for use for the BEGA installation component
selected for luminaire installation
Please note:
The manufacturer accepts no liability for damage caused by improper use or
installation if no BEGA installation component is used to install this BEGA
system pendant luminaire.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Defective glass must be replaced.
Replacement of the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Defective glass must be replaced. Close the luminaire.
Accessories
BEGA Installation components with LED power supply unit.
Satin white finish.
Depending on the desired type of installation, the following suitable
installation components are available for this BEGA system pendant luminaire:
For all level ceilings: 13 241 Surface-mounted canopy (Type A)
DALI · 700 mA DC 13 227 Surface-mounted canopy (Type AS) Smart controllable /
dimmable ·700 mA DC
Suitable for level ceilings and sloped ceilings with a pitch of 0 – 40°: 13
247 Surface-mounted canopy (Type B)
DALI · 700 mA DC 13 253 Recessed canopy (Type C)
DALI · 700 mA DC 13 279 Recessed canopy (Type CS) Smart controllable /
dimmable · 700 mA DC
For flush and surface-mounted 3-phase EUROSTANDARD-PLUS ® track systems:
13 216 Track adapter (Type D) DALI · 700 mA DC
For the accessories a separate instructions for use can be provided upon
request.
Spares
Spare glass | 11 003 037 .1R G |
---|---|
LED module 3000 K | LED-0406/930 |
LED module 4000 K | LED-0406/940 |
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com
Documents / Resources
| BEGA
50972.1 System Pendant Luminaire
LED
[pdf] Instruction Manual
50972.1 System Pendant Luminaire LED, 50972.1, System Pendant Luminaire LED,
Pendant Luminaire LED, Luminaire LED, LED
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>