UNI-BRIGHT LVRA1227B Ascot 12W Spot Light Instruction Manual

LVRA1227B Ascot 12W Spot Light
Instruction Manual
Ascot 12W

LVRA1227B Ascot 12W Spot Light

Driver excluded 350 mA

Installation

Please follow the sequence of installation step by step:

• Switch off the electricity before commencing installation or lamp change
• Cut the correct sized hole in the ceiling in the required location
• FIRST: The luminaire MUST be connected to a driver and not directly to the mains electricity supply 1
• SECOND: Connect primary side of driver to power supply (230 V) 2
• Put the driver in the recess hole
• Press both springs of the luminaire upwards and place it into the cut-out

Warning

• WARNING !
  To prevent electrical shock – Always switch off electricity supply before installation and maintenance.

• The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Improper installation can result in serious injuries and/or damage to property.

• For safety and guarantee reasons it is prohibited to make any modifications to the unit.

| • For indoor use only.
This fitting should only be installed in rooms where direct contact with water is impossible.
---|---
| • Luminaire not suitable for covering with insulating material.
IP20| • Protected against objects ≥ 12,5 mm. Not protected against water.
| • Correct disposal of this product (electrical & electronical equipment waste)
• This product contains a light source of energy efficiency class

UNI-BRIGHT nv
Belcrownlaan 13-Q – 2100 Antwerpian Belgium
– T+32(0)3 6416140 – www.unibright.be

References

• Producent en distributeur van ledverlichting | Uni-Bright | LED-verlichting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>