UNI-BRIGHT MN24018WCCT Non Dim Ceiling Light Installation Guide
- June 13, 2024
- UNI-BRIGHT
Table of Contents
UNI-BRIGHT MN24018WCCT Non Dim Ceiling Light
Safety
-
For indoor use only.
-
This fitting should only be installed in rooms where direct contact with water is impossible.
-
Luminaire not suitable for covering with insulating material.
-
IP54 : Limited protection against dust ingress. Protected against splash water from any direction
-
Correct disposal of this product (electrical & electronical equipment waste)
-
The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country.
-
Improper installation can result in serious injuries and/or damage to property.
-
For safety and guarantee reasons it is prohibited to make any modifications to the unit.
This product contains a light source of energy efficiency class
MN24018WCCT | White | 0 240 mm | SMD LED | 18W | 2700K/3000K/4000K | 1800 Im |
---|---|---|---|---|---|---|
MN24018WBCCT | Black | 0 240 mm | SMD LED | 18W | 2700K/3000K/4000K | 1800 Im |
Driver included
WARNING!
To prevent electrical shock – Always switch off electricity supply before
installation and maintenance.
Installation
Please follow the sequence of installation step by step CCT-Select switch:
- Prepare 3 holes and install screw anchors.
- Install back of the fixture to ceiling or wall and connect wires.
- Put the cover back on the fixture.
2100 Antwerpen Belgium · T +32(0)3 6416140
F +32(0)3 6451831
www.unibright.be
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>