UFO HR-H1 Planetarium Galaxy Projector Instructions

**UFO HR-H1 Planetarium Galaxy Projector Instructions

**

Product manual

Focusing

Manually rotate the focusing wheel to change the lens focus for clear projection.

Film installation

Pull out a slide slot; Choose your favorite slide,
Align the straight edge of the projection with the straight edge in the mounting slot,
Then put into the installation slot; Install the projection slot back into place.

Film disassembly

After drawing out the projection film slot, it can be directly turned 90 ° to 180 °,make the projector fall out of the installation slot.

Function keys

ON/OF

Press the boot button, and all functions will be opened by default (except the motor) after the boot.The default setting is 2 hours automatic shutdown. Short press the button again to turn off the machine.

Motor

Press Open and forward, then reverse, then close. cycle (Default is off).

LED

After the main switch is turned on, press and hold to change the color (cycling)Turn off the LED atmosphere light, and single press to turn on the LED atmosphere light.

PROJECTION

After the main switch is turned on, press to turn off the light and press to turn on the light.

Remote control function

ON/OF

B +

There are three levels of brightness. the default brightness is the middle level.with each press, the brightness increases one step.

B –

There are three levels of brightness. the default brightness is the middle level.with each press, the brightness decreases one step.

S –

Speed is divided into 0-1-2- gear, 0 gear is the slowest, 2 gear is the fastest,the default gear is 1, and the speed decreases one gear at a time.

S +

Speed is divided into 0-1-2- gear, 0 gear is the slowest, 2 gear is the fastest,the default gear is 1, increasing one gear at a time.

MO

Press Open and forward, then reverse, then close. cycle，(Default is off).

LED

After the main switch is turned on, simply press to turn off the LED atmosphere light.Single press to turn on the LED ambient light.

LED MODE

Single press to switch the color of atmosphere lamp (colorful switching cycle).

W

After the main switch is turned on, press to turn off the light and press to turn on the light.

Time switch

The timing function is divided into two levels, namely 45-minute timing/90-minute timing. Press the first time, the timing indicator lights up in blue, and enter the 45-minute timer; press the second time, the timer indicator lights red, and enters the 90-minute timer; in the timing state, the timer indicator light stays on; press and hold to cancel the timer, after canceling The timing indicator light goes out.

Reset

Click to return to the boot mode

Product parameters

Important security information

1. Do not disassemble the product under any circumstances. There are no repairable parts inside the product
2. Make sure your local power outlet matches the voltage required for your device (USB DC 5V/2A)
3. Do not operate this product when the power cord has been worn or broken
4. This product should be kept away from heat sources, such as radiators, heat registers, stoves or other electrical appliances that generate heat.

Symbols

Documents / Resources

| UFO HR-H1 Planetarium Galaxy Projector [pdf] Instructions
HR-H1 Planetarium Galaxy Projector, HR-H1, Planetarium Galaxy Projector, Galaxy Projector, Projector
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>